Providing outdoor illumination arrangement at P.H. No. I under Khasdelpur W/S Scheme under EMSD-I, PHE Dte. Dist. 24 Pgs. (N).

Amount

Supply and delivery at site of 5 meter conical flanged type GRP Street light pole with base plate at bottom, top ID-85+/- 2, bottom ID-150+/-2 including GI(EN8) Anchor bolts (4 nos.) all complete as per direction of EIC.

Fabricating module arm made up from MS for installation of the solar module and LED luminaries on supplied GRP Street Light Pole as in item no. 1.00 including single coating red lead primer and double coated aluminium painting as per direction of EIC.

Erection of 5 Mtr Single Steel tubular pole of length as given below with sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x750 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.50 mt. above ground level including 2 mm thick neat cemented finish and GI earth bolt and earthing arrangement by 8SWG GI Wire,after making drilled holes etc. on pole including filling up the excavated earth pit with shifted soil and ramming properly.

Supply and fixing of integrated Solar 15 Watt LED street Light in Aluminium Extruded enclouser IP65 with built in Mono or Poly Crystalline panel, Lithium Ferro Phospate (LiFePo4) battery, MPPT Charge Controller and PIR Sensor with Colour temperature between (5500-6500) degree K having following minium specification on top of tubular pole. Solar Panel 40W peak or higher, lumen otput:120 lumen/watt, vbiewing angle:120 degree or higher, RED LED for battery low, GREEN LED for solar charging, battery capacity 12 V, 18 AH or higher, autonomy 2 days, Expected battery life 2000 cycles, in built BMS for battery safety, maintenance free operating temperature of (LiFePo4 -10 deg. to +55 deg. c, High efficiency>90%, battery charging time not more than a day, Reverse polarity protection for battery & solar panel, over charge & deep discharge protection for battery, over voltage & over current protection from solar PV module, dusk to Dawn operation, cooling air natural.BIS/MNRE/IEC approved

Supply delivery at site of Decorative Post top for 360degree indirect light, resistance to impact and corrosion(IP65 protection) . Make-CGL,Type-LPTO-40-CDL / Similar type of approved make)

Supply delivery at site of 1.1 KV grade 6 Sq.mm 2core Al.Ar. Cable (Make-Gloster/Mescab/Polycab/Havells/any other approved make) Cable should be supplied as per site requirement.

Supply and fitting fixing of MS water proof type looping cable box of size 250mm x 200mm x 100mm having 4 mm thick comprising of one 250V 5Amp kit-kat fuse unit, one Nutral link porcelain insulator,2 compression cable gland of 2 core,6 sqmm PVC Al Ar. Cable end having liked with rubber gasket line top cover with mechanical locking arrangement etc earthing terminal with lugs on steel tubular pole incl. supplying and fixing 40*6mm thick MS clamp with nut,bolts etc painting with anti-corrosive paint.

Fitting fixing the fixtures as in item no. 5 in existing gate including making interconnection from pole box to fixture with 2.5 Sq.mm copper wire by supply fitting fixing of necessary fixing materials as per direction E.I.C.

Laying of above cable as in item no. 6 on wall/surface incl. S & fitting fixing of required nos. of MS saddles with earthing attachment , making holes etc. as necy. Mending good damages and painting all complete as per direction.

Finishing the end of cable as in item no. 6 by crimping method incl. supplying and fixing solderless socket , tapes, anticorrosive paste & jointing materials all complete as per direction.

Earthing the pole with ¾” inch dia x 6’ ft. long G.I. Earth spike along with 1 x 6 SWG G.I. wire, bolts, nuts and washers of suitable size driven up to a depth of 6.25’ ft. below G.L and restoring the surface duly rammed as per I.E. Rules and direction.

Making protection arrangement of gate light by supply fixing of necessary wire mesh as per direction of EIC.

Testing commissioning the whole installation upto entire satisfaction of E.I.C.

Add: GST @ 18%

Add: Cess @ 1%

MS BABUSONA ENTERPRISE (BID ID -5783718)

SUDIP PRADHAN (BID ID -5783728)