janpad bijnor ke dhampur tehsil mai isthit ramganga colony me avaso ke jeernodhaar ka karya

Amount

Laying and Jointing PVC Pipe. Heading

Dismantling old plaster including raking out joints and disposal of debris within 60 meters distance.

Dismantling R.B. or R.C.C work including stacking of material within 60 meter lead.

Dismantling door or window including chaukhats with hold fasts and including stacking of materials as directed by the Engineer in charge with in a distance of 60 meter (200 feet)

Dismantling C.C. work as directed by the Engineer in charge with in a distance of 60 meter.

Earth work in foundation in dry soil (loam clay or sand) including lift upto 1.50 M and lead upto 30 M including back filling, watering and ramming of excavated earth into the trenches or into the space between or into the plinth with removal and disposal of surplus earth as directed by the engineer-in -in-charge up to a distance of 30 M from the foundation treanches.

Supplying & laying P.C.C. 1:4:8 (1 cement: 4 coarse sand: 8 aggregate) using size (20-40) mm graded crushed aggregate i/c all cost materials, labour, T&P etc. complete.

Brick masonry (M-105) with cement mortar of ratio 1:4 (1 cement: 4 coarse sand) i/c all cost of material, labour, T&P etc complete of work. (230 mm thick wall)

Fabrication and fixing of steel doors, windows including cost of material, cutting, welding, labour T&P required for completion of the work.

12 mm thick cement plaster (for Internal work) in 1:4 (1 cement: 4 coarse sand) cement sand mortar i/c all cost of materials, labours, T&P etc complete of work.

Ordinary centering & shuttering of ply wood or steel for R.C.C. work i/c all cost of material, labour and T&P etc. complete.

Supplying & laying R.C.C. 1:1.5:3 (1 cement: 1.5 coarse sand: 3 aggregate) using size (10-20) mm graded crushed aggregate i/c all cost of material, labour T&P etc complete of work.

Supplying & laying of Reinforcement steel for R.C.C work i/c cutting, bending, binding and cost of binding wire and steel i/c labour and T&P etc. complete.

6 mm thick cement plaster (for Ceilling work) in 1:3 (1 cement: 4 coarse sand) cement sand mortar i/c all cost of materials, labours, T&P etc complete of work.

Earth work in filling in plinth or lawn development & leveling i/c all lift & lead upto 1.0 Km distance all labour, T&P etc complete of work.

Provinding wall putty on new interior or exterior surface after cleaning the old painted surfacewith approved quality material of Berger/J.K./Birla or similar make 02 coats i/c all cost of materials labour and T&P etc complete.

Supply & Fixing of flush door of 32 mm. thick i/c. fixing of wooden cleats and stoppers and i/c. fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied.

Providing and fixing Glazed shutters of Teak wood including ISI marked anodised aluminium butt hinges with necessary screws.

Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished of / and black enamelled M.S.b.(Teak wood) i/c all materials labour T&P etc

Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm (With 2nd class teak wood beading 62x19 mm) i/c all materials labour T&P etc

Finishing two coat of water proof cement weather coat of approved quality on previously new surface with this paint to give an even shade including all cost of materials labour and T&P etc.

Painting two coat enamel paint on wooden surface (door and window) and one coat of priming i/c all cost of material, labour T&P etc. complete

Painting two coat enamal paint on Steel Surface one coat of priming i/c all cost of material, labour T&P etc. complete

2.5cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm Graded approved grit laid in panels finished with 3mm floating cost of cement and marble dist in Ratio of 5:1 as specified over and including 8cm thick base concrete consisting of cement fine sand of 1:25 Fineness modulus and brick ballast 4nm gauge in the proportion of 1:4:8 and removing and over lapping mortar add the joints of the panels if any and giving than uniform finishing including supply of all materials, labour and T&P. required for proper completion of the work.

Supplying and fixing 6 to 8 mm thick china glazed tile in flooring and skirting/dedo with 1:3 approved cement and coarse sand mortar finished within its cement colour slurry, jointing and polished of approved quality complete i/c supply of all materials, labour,tools,and plants etc. requires for proper completion of the work.

Providing and fixing white vitreous china orissa pattern W.C. pan of size 580x440 mm with P/S trap, 10 lit low level white P.V.C. flushing cistern with manually controlled device with all fitting i/c all material, labour T&P etc .

Providing and fixing white vitreous china European type W.C. pan with seat & lid 10 lit low level white P.V.C. flushing cistern with manually controlled device with all fitting i/c all material, labour T&P etc .

Providing and fixing 10 litre (full flush) capacity-white controlled flush low level cistern made of vitreous china with all fittings complete.

Providing and fixing Wash basin size 550x400with C.I. brackets 15mm C.P. brass piller taps, 32 mm brass waste of standard pattern i/c painting of fitting and brackets cutting and making good the wall, Complete of work.

Providing and placing on tarrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with cover and suitable locking arangement with making necessary holes for inlet, outlet and over flow pipes but without fitting and base support of tank.

Previding an laying “brick coba” 12mm thick laid with M-150 class brick bat coba 7.50cm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spriading cement slurry mixed with aerelic ciment concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour. T&P etc complete for proper comletion of work.

S/Laying one layer of Tarfelt or any other equivalent approved material over roof as per direction of Eng.-in charge i/c necessary overlap giving a coat of approved mastic paint below on the bottom and top of tarfelt supreading of necessary quantity of approved coarse sand or small size bajri and i/c supply of all materials, labour and T&P etc. required for proper completion of work.

S/F WIRING POINT FOR FAN/ EXHAUST FAN (LIGHT DUTY): Wiring point for fan /fresh fan (light duty exhaust fan) with 1.5 sq. mm FRLSh PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall complete with 14 SWG copper earth continuity wire piano type switch & cealing rose on 3 mm. thick backelite sheet etc. complete in all respect including matching colour wash.

S/F WIRING POINT FOR LIGHT : Wiring point for light with 1.5 sq. mm FRLSh PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit pipe on the surface complete with 14 SWG copper earth continuity wire, GP Box, piano type switch andcelling rose/angle/batten holder on 3 mm thick phenolic laminated backelige steel etc. complete in all respect including matching colour wash.

Supplying and fixing of 6 Amp. To 32 Amp. SPMCB (10 KA) C Curve complete in all respect. (cat.-A)

Wiring point for Plug with 1.5 sq. mm FRLSh PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall complete and partly laid in slab along with the reinfocement before concreting, complete with 14 SWG copper earth continuity wire piano type switch & socket etc. complete in all respect including matching colour wash.

Providing and fixing 15 mm dia G.I. pipe complete with G.I fitting and clamps i/c making good the wall etc i/c all materials labour T&P etc

Providing and fixing 15mm dia C.P.Brass bib cock approved quality conforming to IS:8931

Providing and fixing 15mm dia C.P. brass bib cock of approved quality confirming to IS standards and weighing not less than 690 gms.

Providing and fixing Stainless steel Kitchen sink without drain board size 610x510mm bowl depth 200 mm with C.I. brackets and stainless steel plug 40mm i/c painting of fitting and brackets cutting and making good the wall, Complete of work.

Providing and fixing 100 mm dia P.V.C. Pipe, 6Kg/per sq.cm pressure for rain water & bath room waste pipe i/c cost of all meterials, P.V.C. pipe fittings, Labour, T&P etc. complete.

Providing and fixing 50 mm dia P.V.C. Pipe, 6Kg/per sq.cm pressure for rain water & bath room waste pipe i/c cost of all meterials, P.V.C. pipe fittings, Labour, T&P etc. complete.

Providing and injection chemical emulsion for preconstruction anti termite and creation a chemical barrier under and all around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along external perimeter of building, expansion joints, surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 part II 1981) Chlorpyrifos or any other approved material such as Heptachlor or chlordane will be used the rate of application of chemical emulsion shall be as follows. (a)Treatment for masonry and foundation 6 litres per Sqm.

Supply & Fixing 80 mm thick precast cement concrete I-shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200×(160+120mm) of O. P. cement, Smooth high gloss finish, skid reditant, manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS, 15658-2006 with a 4 cm thick layer of fine sand including cost of material, labour, T&P Taxes etc. required for proper completion of the work as directed by Enginner-in-charge. (Red Colour)

Supplying & laying P.C.C. 1:2:4 (1 cement: 2 coarse sand: 4 aggregate) using size (20-40) mm graded crushed aggregate i/c all cost materials, labour, T&P etc. complete.

Supplying and fixing Submersable Pump capacity of 2HP including rate of boring and all fittings including cost of all material, labour, T&P taxes etc required for proper completion of work as directed by Engg- in-charge.

Providing and fixing 25 mm dia G.I. pipe complete with G.I fitting and clamps i/c making good the wall etc i/c all materials labour T&P etc

Supply and Fixing of M-25 RCC Precasted I-shape boundary post having size 0.15x0.15M(6"x6") and height 1.68M(5'6") with CC cape i/c cost of all materials, Labour, T&P etc. Complete.