For HT/LT Line Maintenance Work to Avoid Any Electrical Accident and Ensure Protective Measures Before Shivratri Mela (Kawad Yatra-2022), Under Electricity Urban Distribution Division-III, Meerut.

Amount

Re-sagging of loose 11 KV lines spans with opening and binding of conductor properly.

Re-sagging of loose LT lines bare conductor spans with opening and binding of conductor properly.

Straightening of tilted poles of HT/LT lines as follows.

Opening the conductor of spans from 2/3/4 sides of pole to make the pole free and laying the same after work.

Binding of guy ropes in the pole for safe handling and to avoid the chance of accident/falling of pole on the busy roads.

Straightening of pole with digging of pit of proper size and making the pole straight, back feeling of soil with ramming etc.

Guarding of 11 KV lines spans with laying/sagging of GI wire and proper lacing etc./repair and re-sagging of old guarding spans of 11 KV lines properly.

Replacement of damaged 11 KV pin insulator with the cost of material.

Re-sagging of loose LT line AB conductor along the road sides.

Barricating of transformer on the road sides by bamboo's and weaving of plastic ropes on the bamboo's barricating to avoid the chances of accident etc.

Wrapping of polythene sheets on the poles on sides of roads upto 7 ft height and binding by plastic ropes.

Replacements of jumpers at different sections of 33/11 KV/LT lines with due fabrication of conductor into proper size of length, opening the old jumpers and binding of new jumper complete.

Opening/binding of consumer services at different sides during works.

Cutting/chopping of trees branches along the roads.

Repairing of damaged poles of 11 KV/LT lines as follows.

Opening the conductor of spans from 2/3/4 sides of pole to make the pole free and laying the same after work.

Binding of guy ropes in the pole for safe handling and to avoid the chance of accident/falling of pole on the busy roads.

Digging of pit around the pole, cutting MS angle of size 50x50x6 mm in 1.0 Mtr. length and welding in 3, 4 sides of pole properly, back filling of soil with ramming etc.

Guarding of 33 KV lines.

BHARDWAJ ENTERPRISES

VISHNU TRADING CO.