Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC AWARD | |
| 2 | L2₹28.2 L+₹38,326.50 (1.38%)Rejected-Finance SADAR BAZAR DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹26.4 L
EMD Value
₹52,800
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GARRISON ENGINEER DANAPUR CANTT PIN 801503
PROVN OF SHADOW LIGHT AT OT OF MH DANAPUR SEPARATE HT CONNECTION AND CONNECTED WORK AT NCC DTE AND SPL REP OF OLD ELECTRIC DISTRIBUTION SYSTEM OF P6 BLDG AT NCC DTE UNDER GE DANAPUR CANTT
2023_MES_573729_1
GE/DNR/T-59 OF 2022-23 / 8634/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
CDA PATNA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹52,800
Yes
15 Mar 2023
7 Jan 2023
11 Feb 2023
7 Jan 2023
9 Feb 2023
23 Jan 2023
Amount
Taking down carefully existing Old busbar, DB's, cable, etc complete with fitting such as nuts, bolts, screws, etc from ground floor to 4th floor and offrs mess and making good the disturbed surface of walls etc complete all as specified and as directed.
Supply, fabrication, installation and testing of wall mounted LT junction box 600 X 400 X 300 mm factory made (CPRI approved) water and vermin proof protection as suitable size of 3.15 mm thick, front side openable including suitable locking arrangeble and painted with powder coated and copper busbar rating 400 Amps 3+N, 415 V rating including suitable size of holes , porceline insulation and one set (Set of three) of indication lamp LED type complete all as specified and as directed.
Supply, fabrication, installation and testing of wall mounted LT tapping box factory made (CPRI approved) water and vermin proof protection as suitable size of 3.15 mm thick, front side openable including suitable locking arrangeble and painted with powder coated having following electrical assessories complete all as specified and as directed.
(i) Copper bus bar strip with suitable size holes of capacity 300 Amps - 3 phase + N, 415 V rating
(ii) I/P MCCB 250 Amps, 35 KA 4 pole thermal release - 01 No
(iii) O/G MCCB 100 Amps, 25 KA 4 pole thermal release - 01 No
(iv) 3 phase Digital voltmeter 0-500 V - 01 No
(vii) Indication lamp LED - 02 set (Set of Three)
Supply, fabrication, installation and testing of wall mounted LT tapping box factory made (CPRI approved) water and vermin proof protection as suitable size of 3.15 mm thick, front side openable including suitable locking arrangeble and painted with powder coated having following electrical assessories complete all as specified and as directed.
(i) Copper bus bar strip with suitable size holes of capacity 200 Amps - 3 phase + N, 415 V rating
(ii) I/P MCCB 160 Amps, 25 KA 4 pole thermal release - 01 No
(iii) O/G MCCB 63 Amps, 25 KA 4 pole thermal release - 01 No
(iv) 3 phase Digital voltmeter 0-500 V - 01 No
(vii) Indication lamp LED - 02 set (Set of Three)
Supply, fabrication, installation and testing of wall mounted LT tapping box factory made (CPRI approved) water and vermin proof protection as suitable size of 3.15 mm thick, front side openable including suitable locking arrangeble and painted with powder coated having following electrical assessories complete all as specified and as directed.
(i) Copper bus bar strip with suitable size holes of capacity 200 Amps - 3 phase + N, 415 V rating
(ii) O/G MCCB 125 Amps, 25 KA 4 pole thermal release - 01 No
(iii) 3 phase Digital voltmeter 0-500 V - 01 No
(v) Indication lamp LED - 01 No (Set of Three)
Supply, fabrication, installation and testing of wall mounted LT tapping box factory made (CPRI approved) water and vermin proof protection as suitable size of 3.15 mm thick, front side openable including suitable locking arrangeble and painted with powder coated having following electrical assessories complete all as specified and as directed.
(i) Copper bus bar strip with suitable size holes of capacity 100 Amps - 3 phase + N, 415 V rating
(ii) O/G MCCB 63 Amps, 25 KA 4 pole thermal release - 01 No
(iii) 3 phase Digital voltmeter 0-500 V - 01 No
(v) Indication lamp LED - 01 No (Set of Three)
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 150 sqmm 3.5 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. NOTE: (Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this BOQ).
All as per ser item No 07 above but of cross sectional area 120 sqmm 3.50 core
All as per ser item No 07 above but of cross sectional area 95 sqmm 3.50 core
All as per ser item No 07 above but of cross sectional area 35 sqmm 3.50 core
Supply and fixing double door TPN DBs four way, 415 V, 200 Amp rating of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .
Supply and fixing double door SPN DBs 12 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .
Supply and fixing MCB TPN 40-100 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .
Supply and fixing MCB SPN 6-32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .
M&L for Sub main wiring PVC insulated unsheathed cable 1100 volts grade, 4X6 Sqmm size with multistranded copper conductor, drawn in existing conduit but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete. Note : four run 6.0sqmm wire for 3 phase and neutral with colour code as per IE rules and one run green colour 6.0 sqmm wire shall be measured in one unit
M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete. Note : Two run 4.0sqmm wire for phase and neutral with colour code as per IE rules and one run green colour 4.0 sqmm wire measure in one unit
Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of GI strip 25X4 mm size by means of steel bolts,nuts, check nuts and washers test points made of GI strip 40X8mm, 10 cm long , PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion.
M & L for Earth continuity conductor or main earthing lead of 25 x 4 mm galvanized iron strip, buried in ground or fixed to wall in repair including proper clamping/ sadelling in wall complete all as specified and directed by Engr - in - Charge.
Supply and fixing cable tray steel with cover of size 300 X 200 X 2 mm thick including all necessary fitting accessories complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. including dressing/trimming sides and levelling & ramming bottom of excavation and getting out in any type of soil complete all as specified.
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete as specified and directed by Engr - in - Charge.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point completeas specified and directed by Engr - in - Charge.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed by Engr - in - Charge.
M&L for laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.
Supply and fixing of GI tubing, light grade, 80 mm bore with all fitting laid in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / JINDAL / Bansal .
M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass complete all as specified and direct by Eng-in-charge.
M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 complete all as specified and as directed.
Supply and fixing, installation and commissioning of Shadow less light fitting of double dome type 48 X 2 Watts, 48 Nos. LED Light in each dome with light Intensity of 1,60,000 lux , dia of light at source of dome is 500mm, spot dia is 100-150mm, depth of lumination 10-15cm, colour temperature 3800-5200K, Average life is at least 50000Hrs, Intensity Control of 10-100 Digital with Adjustable Focusing with five memory function, multifunctional controller with fully remote operated complete with emergency power unit Including battery for back up supply of min 60 minutes (3 KVA), having fully counter balanced moveable on ceiling trolley having a axial rotation of 360 deg. The unit to be suitable for operation on 230 V, single phase 50 cycles mains supply with including Three year on site warranty on complete fitting with their accessories and fixing as per directed by Engg-in-charge. (Note: Accessories as per site requirement shall be included in quoted rates). Make: Live Tech Equipment Pvt. Ltd., Model No: GLANZA 500+500 TWIN.
Disconnecting of 11 KV/ 433 Volts 150 KVA transformer out door/ indoor type including all necessary HT/ LT connections of bothside, earth teriminals and taking down carefully from Two/ four pole structure/ Platform mounted on PCC foundation etc including carrying the same to new installation complete all as specified and as directed.
Labour only for fixing/ Installation 11 KV/433 Volts tranformer of capacity 150 KVA obtained from item No 1 above with all necessary HT/ LT electrical connections complete all as specified and as directed.
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and as directed.
Supply and fix steel tubular swaged poles type 410 SP-55 (11.0 meter long) heavy duty complete with CI base plate and finial including foundation and coping including painting complete all as specified and as directed. Note : Excavation, PCC work painting work shall be included in this item.
Supply and fix HT 11 KV, out door type gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating upto 400 Amps complete all as specified and as directed.
S & F drop out fuse assembly complete set with insulator 02 nos and connected accessories for 11 KV grade of 400 Amps Capacity complete all as specified and as directed.
M&L Mild steel Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one coat primer one under coat and one finishing coat of paint complete all as specified and as directed.
S& F Disc type insulator, porcelain, vitreous 145 mm high and 255 mm dia ball and socket type, white, brown or green Single disc assembly with tension clamps for conductors, working pressure 11 KV complete all as specfied and as directed.
M& L for pin type , porcelain, vitreous, white, brown or green insulator, 150 mm height, 150 mm dia for 11 KV grade including one galvanised iron washer, nut and pin complete all as specified and as directed.
Supply and fix lightning arrestor linear resistance type HT 11 KV 10 KA capacity pole mounted station class complete all as specified and as directed.
Supply, stringing and fixing of Aluminium conductor steel reinforced (ACSR) OH conductor of any type including binding wire complete all as specified and as directed.
M&L 20mm dia stay rod including Stay assembly complete with accessories as shown in electrical plate No. 1 complete all as specified and as directed.
M&L Loop type insulator, vitreous porcelain,white, brown or green Small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and directed.
S & F Danger notice plate of 1.6 mm thick mild steel sheet vitreous enameled white with letter figures and conventional skill and bones in signal red colour and fix with MS clamp for HT size 25 X 20 cm complete all as specified and as directed.
Supply fabrication, installation and testing of LT out door type factory made CPRI Approved feeder piller box of size 900mm x 600mm x 400 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 25X25X5mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of size 0.80m X 0.6m X 0.90m depth (0.30m below ground level and 0.60m above ground level) and connections of all outgoing / incomming cable of any size drawing / digging out cable from loops in trenches inclusive of necessary excavation and earthwork as required and relaying the cables including the following fitment accessories all complete as specified and as directed.
INCOMMING : MCCB 250 Amps Capacity 35 KA, 4 pole , 415 V rating - 01 No & LED indication light 3 Nos - 01 set
OUTGOING : (a) Alluminium bus bar of 400 Amps rating with PVC sleeves with maintained the colour code and provision of making holes as required with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos
(b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of LT pannel -01 No.
S & F Change Over switch 250 Amps, 4 pole, 415 Volt rating including suitable size of box CPRI approved 2.0 mm thick CRCA sheet with enamelled paint including danger plate and all connected and fixing arrangement on wall complete all as specified and as directed.
Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE/ Ariel branch cable, armoured, Al conductor cable of size 95 sqmm complete all as specified and as directed.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 150 sqmm,Indoor/Outdoor type complete all as specified and as directed.
S & F GI tube light grade 80 mm dia with all necessary fittings complete all as specified and as directed.
Supply and fixing FRP fencing non conductive with high dielectric strength, non corrosive, termite proof, fire retardent with all accessories complete all as specified and as directed.
M & L for 100 mm thick Cement Concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.
M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metre below normal ground level, connected to galvanised galvanised iron strip 32×6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40 mmlight grade GI pipe for protection of strip,waterpipe light grade 15 mmbore GI pipe light grade , salt Charcoal all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all are specified and directed by Engr-in-charge.
M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required by 32x6mm galvanised iron strip complete all as specified and as directed by Engr-in-charge.
RC GUPTA AND SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .