CERTAIN REPAIR REPLACEMENT TO DOOR, WINDOW, FALSE CEILING, PLINTH, SEEPAGE, ROOF SHEET INCLUDING PLUMBING AND INTERNAL ELECTRIFICATION TO MD AND OTM ACCN AT HQTC (U) BANGALORE

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each

Taking down door/ window shutters of any description exc 1 sq. m and n exc 2 sqm resecuring or easing & adjusting and refixing in same opening all as specified.

Taking down door/ window shutters of any description n.exc 1 sq. m resecuring or easing & adjusting and refixing in same opening all as specified.

Taking down aluminium window shutters of any description resecuring or easing & adjusting including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and refixing in same opening all as specified.

Taking down aluminium door shutters of any description resecuring or easing & adjusting including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and refixing in same opening all as specified.

S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M & L 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chambered or rounded mitred and beads for securing glass etc. size of members of shutter as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 125mm long Butt hinges, medium weight, cold rolled mild steel,

S&F for 200mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 150mm Aluminium handles, cast type anodised.

S&F 150mm width of recess between flanges (when open) parliament hinges, mild steel cold rolled

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples in steel/wooden/aluminium

S&F glass, 4mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane.

S&F in repairs for Prelaminated particle board, 18/19mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F in repairs 40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified

S&F in repair magic eye ball ultra-clear view with wide angle for all round visibility with ultra clear Lens , superior and antique brass finish with 180 degree great visibility to install over a wide range of door thickness up to 35 mm complete all as specified

S & F in repairs stainless steel self closing auto hinges for wooden cabinet shutter complete all as directed

S & F in repairs stainless steel telescopic channel ball bearing drawer channel 500mm long with loading capacity: 45Kgs complete all as directed

S & F in repair mortice latch with two levers (vertical type), brass body and length of the latch is 65 mm complete all as directed

S&F in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified.

S&F in repairs 25mm dia mild steel powder coated, fancy type curtain rod complete all as specified.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat complete all as specified.

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixied with frame at site etc complete all as speicfied and directed

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel etc complete all as speicfied and directed

S&F for 125mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 125mm Aluminium handles, cast type anodised.

S&F in repairs 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F in repairs 3mm thick ordinary quality colorless cast acrylic sheet with light transmittance of 92% including fixing with necessary screws, and aluminium beading.

S&F in repairs 3 to 4mm thick translucent polycarbonate Sheet including fixing with necessary screws, and aluminium beading.

S&F in repairs 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers only one face has decorative veneer fixed with nails over 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats

S&F in repairs second class harwood teak finish beading/ hand rail decorative antique finish in section exc 13 & n.exc 25 sqcm, clean sawn, secured with screws including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats

Preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic eanmel paint.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in unframed work, in any position.

M&L 2nd class hard wood Plain fillets. square, rectangular or triangular, n. exc 3sqcm in section, clean sawn, secured with nails orbrads.

M&L 2nd class hard wood Plain fillets. square, rectangular or triangular, exc 3Sqcm & n. exc 6sqcm in section, clean sawn, secured with nails orbrads.

M&L 2nd class hard wood Plain fillets. square, rectangular or triangular, exc 6Sqcm & n. exc 13sqcm in section, clean sawn, secured with nails orbrads.

S&F in repairs sheet glass, of 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane.

S&F in repairs sheet glass, of 3mm thick ordinary quality, ground or obscured or frosted, on one side in square n.exc 0.5 Sqm in each pane.

S&F in repairs 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,

S&F in repairs 140mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring,

S&F in repairs door closer aluminium extruded section body hydraulically regulated, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repairs aluminium door sweep with brush made of nylon (min hight of brush of 25mm) fixed at the base of doors

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete.

M&L for providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete in walls all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc. all as specified.

M&L for Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface all as specified.

M&L for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces all as specified.

Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement.

M&L for preparing new plastered on ceiling and applying three coats of white wash.

Removing demolished material i.e. building materials, concrete, stone masonary, debris, tree roots, trunk, branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination as and when directed by Engineer-in-Charge during execution.

M & L for preparing of old /new wall surfaces and applying two or more coats of texture paints of approved make and shade etc after preparing surface with a coat of primer and 06 mm thick of plaster of paries punning to give a smooth and even surface of any colour complete all as specified and directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Vitrified Ceramic tiles in dark shade 10mm thick area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match all as specified.

All as per item above but as in wall skirting over and including 10mm thick rendering of CM 1:4.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match all as specified.

All as per item above but as in wall skirting over and including 10mm thick rendering of CM 1:4.

M&L for glazed ceramic coloured/digital tiles in vertical surface 350x250mm x 7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size 300mm x 300mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match all as specified.

M&L for chequered cement concret tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with white cement & pigments in floors over 20mm thick screed bed of cement mortar 1:6 all as specified & directed.

M&L for 20mm thick Granite (Jet black) of any type work (table rubbed and polished) in cooking plateform, window sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick screed bed in CM 1:6.

M&L for machine cut cudappah stone slab 20-25mm thick over and including 15mm thick screed bed of CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

S&F in repairs 15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe and fixed all as specified.

S&F in repairs concealed cock 15mm bore, fancy type chromium plated with brass material and fixed all as specified.

S&F in repairs angle cock 15mm bore, fancy type chromium plated fixed all as specified.

S&F in repairs bib tap/ angle cock/ concealed cock/ wall mixture/ basin mixture spindle for 15mm bore, with brass material any type & any size all as specified.

S&F in repairs premium quality 15mm bore central hole basin mixer with regular spout without popup waste system of make Jaguar, Cera, Somany or equivalent.

S&F in repairs premium quality 15mm bore wall mixer system with provision for overhead shower complete with 115mm long bend pipe, connecting Legs & wall Flange of make Jaguar, Cera, Somany or equivalent.

S&F in repairs 15mm bore hand shower (Health Faucet) with 8mm Dia, 1 Meter Long flexible tube & wall hook of make Cera, Parryware, Somany, Jaguar or equivalent.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repairs glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250 x 250mm fixed with brass CP brackets complete all as specified and directed by Engr in Charge.

S&F in repairs sheet glass shelf assembly with L clamp consisting of 5 to 6mm thick glass 12 to 15cm wide with brass CP bracket guard and railing 45 to 60cm long complete all as specified and directed.

S&F in repairs mirror cabinet with Modiguard/Saint Gobain mirror of size not less than 500mmx350mmx125mm complete all as specified

S&F in repairs 6mm thick mirror of any size including rounding and polishing of edges with necessay fittings

S&F in repairs Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F in repairs staineless steel Soap dish, any type of size approximate size 160x 60x90mm, fixed to plugs with chromium plated brass screws

S&F in repairs 5mm thick mirror of size 450mm x 600mm mounted on 6mm thick commercial ply wood backing and screwed with PVC channel alround.

S&F in repairs Brass chromium plated shower rose 125mm size all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm all as specified.

S&F in repairs Low density polyethylene (LDPE) pipes 32mm dia, of pressure rating 6 kgf/sq. cm

S&F in repairs cromium plated grating dome 100mm dia with or without waste hole.

S&F in repairs cromium plated grating dome 125mm dia with or without waste hole.

S&F in repairs kitchen utensil rack in steel made of premium grade stainless steel and highly durable and rust-proof of size not less than 90cmx80cmx20cm complete all as specified

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs 32mm bore Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms)

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern

S&F in repairs PVC valveless, syphonic action type kit for flushing cistern of 10 litres capacity, low level, cistern

S&F in repairs plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F in repairs straight disabled stainless steel grab bar of 32 mm dia and 600mm long complete all as specified and directed

S&F in repairs L shaped disabled stainless steel grab bar of 32 mm dia andsize 500x 770mm complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level)

M&L for 100mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) as in sub-base layer.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc. all as specified.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring all as specified.

M&L for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing complete all as specified and directed by Engr in Charge.

M&L for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white washing on walls all as specified and directed by Engr in Charge.

M&L for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing on ceiling all as specified and directed by Engr in Charge.

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted through mechnical means. over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment all as specified and directed by Engr in Charge.

M&L for 2 coats of cement based paint through mechnical means.over a coat of priming plastered and other surfaced with alkali resistant priming paint on wall including preparation of old surface after complete removal of existing treatment all as specified and directed by Engr in Charge.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion through mechnical means complete all as specified and directed by Engr in Charge.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion on walls through mechnical means all as specified and directed by Engr in Charge.

M&L for preparation of old decorated surface of ceiling including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion through mechnical means on ceiling all as specified and directed by Engr in Charge.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and applying one coat of cement paint through mechnical means complete all as specified and directed by Engr in Charge.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and applying two coat of cement paint through mechnical means. Complete all as specified and directed by Engr in Charge.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and applying one coat of exterior emulsion paint (weather coat) through mechnical means on walls all as specified and directed by Engr in Charge.

M&L for complete removal of existing treatment of walls and applying two coats of exterior emulsion paint (weather coat) through mechnical means over a coat of approved primer complete all as specified and directed by Engr in Charge.

M&L for complete removal of existing treatment of walls and applying two coats of plastic emulsion painting white or tinted through mechnical means. over a coat of 1mm thick wall care putty, all as specified and directed by Engr in Charge.

Preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint all as specified and directed by Engr in Charge.

S&F in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F false ceiling at any height 600mm x 600mm x 15mm Armstrong/ Everest mineral fiber tegular ceiling tiles of type classic lite RH- 99 laid on Armstrong/ Everest prelude XL exposed grid system with 9 mm wide T section flanges color white. The framework comprises of main runner spaced at 1200 mm centre. Hanger (GI wire) to be fixed by approved roof plug and screws etc. The last hanger at the end of each main runner should not be greater than 450 from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stitching) to be interlocked between main runner at 600mm center from 1200x600mm modules. Cut cross tees longer than 600mm to be supported independently 600mm x 600mm modules to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong/ Everest wall angle secured to walls at 450 mm maximum centers.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & as directed.

Point wiring complete with 1100volts grade, single core, PVC insulated FRLS cable multi-stranded copper conductor of size 1.5 sqmm nominal area, drawn through and including PVC Casing Caping of suitable size, with all necessary fittings and accessories fixed in walls/ ceiling with one run neutral and one run of single core cable of same description above but green colour in continous earthing wire 1.5 sqmm connected to common earth dolly including PVC junction / mounting boxes on / in the wall / ceiling for piano switches/ switch socket combination/ fan regulators etc and GI junction box duly covered with 3mm thick hylam sheet for the following, complete all as specified and directed. :-

One light/ fan point controlled by one single pole 5 Amps switch

One switch socket out let point 5 Amps on independent board

All as per item No 123 here in before but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 2.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

All as per item No 123 here in before but for PVC insulated FRLS copper conductor of size 4.0 sqmm for switch socket multipurpose 15 Amps including provision of 4.0 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

S & F in repair PVC ceiling rose 65 x 50 mm surface type with 3 terminals, complete all as specified and directed.

S & F in repair Piano type switch single pole 5 Amps one way 230 volts, complete all as specified and directed.

S & F in repair Socket outlet 2 in 1, 3 pin, 6 Amps 230 volts, complete all as specified and directed.

S & F in repair Switch socket combination 2in 1, 3 pin 5 amps multi purpose flush type universal, with indicator, complete all as specified and directed.

S & F in repair Switch socket combination 5 in 1, 3 pin 5 and 16 amps multi purpose flush type universal, with indicator complete all as specified and directed.

Sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.50 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 2.50 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Taking down Exhaust fans, of any size or any capacity 250/300/350/400 mm sweep dismantaling blades & refixing of the same including and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed. Note:- (i) Servicing & overhauling, rewinding,Painting & replacement of defective spare part, connecting wire etc shall be measured & paid separately

Material & Labour for painting of Exhaust fans of any size or any capacity 300 mm sweep complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Rewinding of Exhaust fan 300 mm sweep dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing all as specified and directed.

Servicing & Overhauling only of Exhaust fan 300 mm sweep at site by oiling/ greasing to reduce the noice of the fans and connecting the same complete all as specified and as directed.

Supply and fixing of in repairs Exhaust fan by replacement of Bearing/ bush of any size as per site requirement all as specified and as directed.

Supply and fixing of in repairs Exhaust Fan capacitors 2.5 mfd for fans all as specified and directed

Taking down Wall Mounted fans from walls , dismantaling blades & refixing of the same including and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed. Note:- (i) Servicing & overhauling, rewinding,Painting & replacement of defective spare part, connecting wire etc shall be measured & paid separately

Rewinding of Wall mounted fan of any sweep dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing all as specified and directed.

Taking down ceiling fans from ceiling, dismantaling blades & refixing of the same including and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed. Note:- (i) Servicing & overhauling, rewinding,Painting & replacement of defective spare part, connecting wire etc shall be measured & paid separately

Material & Labour for painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Rewinding of ceiling fan1200/1400mm sweep dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing all as specified and directed.

Servicing & Overhauling only of ceiling fan at site by oiling/ greasing to reduce the noice of the fans and connecting the same complete all as specified and as directed.

Supply and fixing of in repairs ball Bearing 6201/6202/6203 as per site requirement all as specified and as directed.

Supply and fixing of in repairs capacitors 1.5 mfd for fans all as specified and directed

Supply &fixing of in repairs stepped type electronic fan regulator flush type 300 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm fixed as in repair complete all as specified and directed

Supply and fixing in repair 15 Watts, round surface rimless round down light moulded in all as specified and directed.Make : BAJAJ/CROMPTON/HAVELLS

Supply and fixing in repair LED lights fitting 4 feet, 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in repair electronic meters temper proof LCD display with polycarbonate cover 3 phase, 440 V, 10- 60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

Supply and fixing in repair electronic meters temper proof LCD display with polycarbonate cover single phase, 230 V, 10- 60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

NANDI CONSTRUCTIONS

M R CONSTRUCTIONS