Providing RCC Shelves i/c finishing sinks and other PH articles for installation one additional Aqua guard for various Boys and Girls Hostels replacement of/rusted unserviceable MS water tanks by PVC water tanks including providing safety me

Amount

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fast and other attachments etc. complete and stacking them within all lead & lift. a) Not exceeding 3 sq.m in area.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fast and other attachments etc. complete and stacking them within all lead & lift. a) Not exceeding 3 sq.m in area.

Demolition above G.I.upto all heights including disposal of un- serviceable materials within all lead & lift. a) un-reinforced cement concrete more upto 15cm. Thickness

Excavation in foundation, trenches etc. in all kinds of earth work including spade work, pick work, blasting work, jumper work and chiseling and doing work in saturated soil including storing, strutting and pumping or boiling on water (surface and sub-soil Water) up to any depth wedging out of rock etc. up to all lead and lifts exacts including stacking the excavated material clear from the edge of the excavation as per direction of Engineer-in-Charge and then returning the stacked soil in 15 cm. layers when required into plinths and sides of foundations etc. consolidating each depositing layer by ramming and watering and then disposing of all surplus excavated earth including stacking of serviceable materials withinall lead land lifts as directed by the Engineer-in-Charge. .a) Pick and jumper work.

Excavation in drains and channels etc. in earth work in all kind of soil including pick & jumper work, dressing of side and bed and disposing of excavated earth including all lead and lifts disposed earth to be leveled and neatly dressed. a)Pick and jumper work.

Providing form work of ordinary timber planking’s so as to give a rough finish including centring,shuttering,strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitureinforced concrete and plain concrete work in: a) Flat surfaces such as soffits of suspended floors, roofs, landing and the like. i) Floors etc. up to 200 mm in thickness.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in: a.) Foundation and plinth:

Providing and laying cement concrete work 1:1.5:3 (1 cement :1.5 sand :3) graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : a)Lintels,beams, girders, bressumers and cantilevers upto floor two level.

Providing and laying cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: : a) Foundation and Plinth

Providing Tor Steel reinforcement for R.C.C. work including bending, binding and placing in position complete up to any storied height including all lead and lifts.

Half brick masonry (2nd class) using common burnt clay building bricks in Super –Structure with Cement mortar 1:4 (1 cement:4 sand).

Half brick masonry (2nd class) using common burnt clay building bricks in Cement mortar 1:3 (1 cement:sand). a) In Super –Structure

Coloured Glazed Tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) jointed with cement slurry.

Providing and fixing 10mm thick anti skid water proof stain and impact resistent heavy duty vetrified tiles Nitco,Somania,Jonson (Ist class quality) or equivalent 300x300mmx 10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed withpigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick

Providing and fixing 0.60mm thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts & nuts 6mm dia & pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Cement concrete pavement (25 mm to 50 mm thick) with 1:2:4 (1 cement:2 sand :4 stone aggregate 20 mm nominal size) including finishing with a floating coat of neat cement complete

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: a).In beams, joists, channels, angles, tees flats with connecting Steel plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Providing and fixing hard drawn steel wire fabric 25x25mm mesh of weight not less than 3.20 kg per Sqm. to existing steel window frame etc. including 20x5mm MS flat acting as beading and including welding rigidly and i/c a priming coat of red lead paint complete in all respects as per direction of the Engineer-in-charge

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping . a) With enamel paint other than white.

15mm Cement plaster in single coat on the Rough/Fair side of brick/ concrete/ stone walls for interior plastering including arises, internal rounded angles, chamfers and/or rounded angles not 80mm in girth and finished even and smooth up to all heights including all lead & lifts : a)upto floor II level i)Cement mortar 1:4 (1 cement: 4 sand).

b)From level VI to VII i) Cement mortar 1:3 (1 cement: 3 sand).

Extra floating coat of neat cement.

Extra for providing and mixing water proofing materials in cement mortar in proportion recommended by the manufactures.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper..

Finishing wall with weather proof exterior grade emulsion of approved design(Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete upto all height

Providing and fixing P.G.I. Lid with triangular P.G..thoms of 0.63mm thick sheet at top on existing P.V.C.tank wityh hasp and staple for locking arrangement. Public Health

PUBLIC HEALTH Providing and fixing to wall ceiling and floor galvanized Mild Steel Tubes (Medium Grade) tube fittings and clamps including making good the wall, ceiling and floor: a ) 15mm nominal bore

b)20mm nominal bore

c) 25mm nominal bore

d)32mm nominal bore

e)40mm nominal bore

Making connections of galvanisized steel distribution branch with galvanized mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. a)610x460mm with bowl depth 200mm

Providing and fixing C.P. Brass Waste for wash basin or sink. a) 32 mm dia.

Providing and fixing straight PVC waste pipe (super quality) for wash basin and sink of follow sizes: a) 32mm nominal size

Providing and fixing C.P. brass angle valve a)15mm dia without nut and pipe.

Providing and fixing:C.P. Brass Bib Tap with Capstan Head. a)15mm dia

Providing and fixng high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. a) 75mm dia

Providing and fixing PVC door bend with oval access door, insertion rubnber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete a) 75mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. a)75mm dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. a) 75mm dia.

Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. a) 110mm x 75mm

Providing and fixing PTMT grating round of approved quality and colour. a) 100mm nominal dia.

Providing and fixing PVC water storage tank of ISI:12701 marked GI inlet and outlet connection 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all height above ground level a)1000 litres net capacity tank

b)2000 litres net capacity tank

Providing and fixing brass Full Way Valve with wheel: a) 15mm nominal bore

b) 20mm nominal bore.

c)25mm nominal bore.

b) 32mm nominal bore

e)40mm nominal bore.

Providing and fixing G.I./M.I. Union of following size: . a) 15mm nominal bore.

b) 20mm nominal bore.

c)25mm nominal bore.

d)32mm nominal bore.

e)40mm nominal bore.

Aditya Jaiswal