Upgradation of GAD ISM Dispensary Dhar Mahanpur as Aush HWC third call

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil (Including all leads and lifts and all type of carriages by MT/HL)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)(Including all leads and lifts and all type of carriages by MT/HL)

Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including all leads and lifts and all type of carriages by MT/HL)

Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing . All works upto plinth level 1:3:6(1 cement : 3coarse sand : 6graded stone aggregate 20 mm nominal size)(Including all leads and lifts and all type of carriages by MT/HL)

Filling available excavated earth in trenches including ramming in layers not exceeding 20cm in depth

Providing Centring and Shuttering including Strutting, propping etc. and removal of the form work

Suspended Floor

50 mm thick cement concrete flooring in 1:2:4 mix with 20mm nominal size stone aggregate with neat coat of cement slurry.(Including all leads and lifts and all type of carriages by MT/HL)

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Half brick massonary in 1:4 mortar

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:610x460mm bowl depth 200mm

Providing and fixing square mouth SW Gully trap grade-‘A’ complete with C.I grating brick masonry chambers with bricks of class designation 75 & water tight C.I cover with frame of size 300 x 300mm (in side). The weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 Kg as per standard design:a) 180 x 150mm size P type with F.P.S. bricks

Making chases upto 7.5x7.5 cm in walls including making good after housing G.I.pipe etc.

Providing and fixing G.I.pipes complete with G.I.fittings excluding trenching and refilling etc.(external work)

(ii) 20 mm dia, GI pipe (Medium)

Providing and fixing G.I.union for in G.I.pipes including cutting and threading the pipe and making long screws etc (net work ( external fitting ) (ii) 20 mm nominal bore

Providing and fixing C.P. Bib cock of standard design and of approved make conforming to IS: 8931

20 mm nominal bore. (Jaguar make code No.071)

Providing and fixing ball valve (brass) of approved quality complete.

20mm nominal bore.

Providing and fixing brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931(Jaguar make code no. 051) (screwed end) 32 mm nominal bore

12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6( 1 cement : 4 fine sand)(Including all leads and lifts and all type of carriages by MT/HL)

Structural Steel Work Welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of seel Primer

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain (500 - 600mm)

Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the direction of engineer incharge including all carriages , supply , complete job.