Provision for ward arrangements, Finishing front elevation and arrangements of accessibility to physically challenged persons to the new Government District Head Quarters Hospital at Rasipuram in Namakkal District

Supplying and fixing fine polished cuddapah slab of 38 / 40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers

Tactile Flooring: Supplying and laying tactile paver type of yellow colour ceramic tile (for vision impaired persons as per standards) of size 305 x 305 x 15mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:3 (one cement and three M-sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete complying with standard specification and as directed by the departmental officers. The rate is inclusive of laying, conveyane, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer. (The tactile tiles quality,brand, colour, shade should be got approved by the Executive Engineer before use on work).

Supplying and Fixing of Aluminium Dye Cast Letters of 18" size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process.

Supplying and Fixing of Brass Emblem of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process.

Supplying and fixing of Acryllic name plate 3mm thick with Vinyl printing including embossing the letters of all fonts and sizes etc., complete as per the direction of the departmental officers

Supplying and fixing of Modular sign (Toilet boards) including embossig the letters of all fonts and sizes etc., complete as per the direction of the departmental officers.

Supplying and fixing purified water dispenser of size 455mm Length x 450mm width x 1420mm heightmade up of stainless steel 304 grade sheet of 0.80mm thick and a approximate weight of 65kg. It should consist of 40 litres capacity HDPE storage tank for cold water, 40 litres capacity HDPE storage tank for warm water and a 20 litres capacity HDPE tank for hot water. The rate includes internal pipe arrangements, tap arrangements. It should deliver the warm water, cold water and hot water. The cost includes all materials, transportation to site and fixing charges etc., complete. The make and brand should be got approved by the Executive engineer before use on site and as directed by the departmental officers

Manufacturing, Supplying and Fixing of PASS BOX of overall size 0.60mX0.60mX0.60m making with stainless steel 304 grade view panel door with UV germicidal lamp (Automatic ON when the door is closed, Fluorescent lamp ( Automatic ON when the door is opened) of Electromagnetic door locking system etc complete

Providing and fixing of 1.2mm thick Lead Lining Door for X-Ray Rooms, Scanning Rooms with Mild Steel Door Frames 105mm x 57mm X 18 G and 12 G x 50mm Shutter made of GI with PWG finish and honey wool insulations with SS 101mm x 75mm x 3mm SS 304 Ball Bearings Butt Hinges, Mortice Sash Lock ML 100A, 50mm BS, 85mm centre, CL 207 : Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make), Heavy Duty Door Closer, Frames fixed wih walls using Mortice Sash Lock ML 100A, 50mm BS, 85mm centre CL207: Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make) all neccesary accessories and fittings as per the required and as per the approval for the Department Officer.

Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor pring for each shutter, consealed tower bolt, suitable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers

The supply and installation of UPVC partitions with doors shall utilize UPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 74mm x 60mm x 56mm, a shutter of 104mm x 60mm x 66mm, a mullion of 72mm x 60mm x 36mm, a glazing bead of 35mm x 18mm, a 20mm multi-chambered hollow uPVC panel section of 150mm x 20mm, and a uPVC panel bead of 19mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, where required, with 1mm thick GI steel sections. The door will be equipped with 3D hinges for enhanced weight holding capacity, and security devices such as multipoint lock systems with a cylinder lock facilitated handle, all compliant with relevant specifications and departmental directives. Glazing or uPVC panels shall be 5mm thick Plain Toughened or uPVC panel grip, held by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash shall be mitred cut and fusion welded without mechanical joints, with all welded joints neatly trimmed to a grooved nib finish, ensuring the finished products are free from sharp edges. The complete units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high-quality fasteners, and silicon sealant shall be applied to fill the gap between the wall and the frame for a leak- proof installation and completion etc., Complete and as directed by the department officers.

Supply and filling in foundation and basement with Gravel in layers thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers

Supplying , fixing and roofing with colour Polycarbonate sheet of 10 mm thick with all necessary accessories such as aluminium channels top & bottom of the sheets, rubber beading, J/V bolt and nuts of suitable length with suitable washers complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of SS Sink of size 1200 x 550 x 180mm. Complete complying with standard specifications and as directed by the departmental officers

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50x25x1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supply, Fabrication, Erection, alignment and levels as per approved shop drawing of structural steel work in built up sections comparision of IS4923-1997 in MS tublers section, plates etc., Necessary permanent rivets, bolts, washers and nuts, MS pipe for column post, handling, straightening, cutting, drilling holes, welding, sand blasting, shop assembly, transport to erection site, storing, leading to erection site and apply a coat of anti-corrosive yellow primer paint of approved make and two coat of MRF enamel paint prior to erection t complete job in all respect.The rate is inclusive of design ,shop drawing preparation, submission for approval etc., and also inclusive of any other incidental charges such as lifting using cranes, labour charges for erection, cost of all materials involved and painting two coats over one coat of primer and as directed by the departmental officers.

Manufacture and supply of Incinerator for Ladies Bathroom with necessary arrangements etc complete.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI coller for each sprinkler bulb, mounted in MS pipe ling using suitable size MS threaded coupling, thread, shellac etc., as per standard mehtods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers.

Supply, erection, testing and commissioning of following MS 'C' Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10kg /sq.cm including necessary fittings like MS flange of table 'E' elbows, reducers, gaskets, bolt, nuts wth washerr & joints as per standard method of arc welding, including one coat of metal primer and two coat of Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers.

80mm dia

50mm dia

40mm dia

25mm dia

The UF system shall comprise UF feed pumps of Kirloskar make, KDS series, monoblock type, 3-phase, rated for 5.0 m³/hr at 24 m head, 1.5 HP capacity, constructed in cast iron with mechanical seal, complete with all accessories, supplied as 2 numbers; one bag filter set of 20-inch size, jumbo type, polypropylene (PP) construction; micron filter assemblies with housing of 20-inch size, jumbo type, single element, PP construction, supplied as 2 numbers; UF membranes of Team make or equivalent, each rated for 2.5 m³/hr flow, supplied as 2 numbers; one UF skid fabricated in MS construction; backwash pumps of Shimge make, monoblock centrifugal type, rated for 15 m³/hr at 24 m head with 3 HP motor, supplied as 2 numbers; online flow meters of UKL make or equivalent, 25 NB size, flange type, supplied as 2 numbers; pressure gauges of Baumer make or equivalent with range 0–21 psi, supplied as 2 numbers; solenoid valves of U-Flow make, 1.5-inch size, supplied as 4 numbers; one CIP pump of Shimge make, monoblock centrifugal type, rated for 5.0 m³/hr at 24 m head with 1 HP motor; one CIP tank of 300-liter capacity made of PE; dosing systems comprising electronic metering pumps of Focus make with capacity 0–6 LPH along with 50-liter dosing tanks of E-Dose make, supplied as 3 complete sets; electrical cabling for plant area including Polycab or equivalent flexible cables with single compression glands, complete with cable laying and proper termination from panel to motors, supplied as 1 lot; plumbing and piping work with uPVC Schedule-40 lining pipes of Astral make or equivalent including all fittings, valves and plant inter-connections to all required equipment, supplied as 1 lot; and a control panel of Astero make or equivalent, wall-mounted or floor-mounted type, fabricated from 1.6 mm thick CRCA sheet metal with powder coating, fitted with L&T or equivalent electrical components such as contactors, MCBs, relays, etc., suitable for conductors and loads as per approved load list, supplied as 1 number, complete in all respects for satisfactory operation.

CURTAIN WORK Supplying and laying polyester, washable and stainfree cloth (Bio-Active fabric washable germfreesuitable for dialysis room) curtain system with maximum curtain cloth height 230cm (top 30cm white colour and 200cm light blue colour as per approval) stitching with stiffener tape, pleats, ironing and laying around Each bed using sliding wheels two nylon rollers, nylon axil and tangle free nylon swivel stem with chrome-plated steel hook, curtain track should be supported in roof using 20x20mm, 2mm thick sized aluminium tubes same spec with end caps in two sides using all necessary fittings. as per the direction of engineer in charge including conveyance to site, laying in line and level, sealing all cutting in false ceiling with powder coated MS cup, all leads and lifts including all labour charges etc. complete.(unpleated length of the cloth measurement will be considered for payment also the bottom and top folding will not be considered in cloth measurement)/ supplying and fixing powder coated 20mm dia. GI round tube hanging support of required length(app. length 1.10m) one end fixing from slab by using 6mm dia expansion bolt at a distance not more than 2m, c/c down end fixed to powder coated aluminium channel frame x 20mm x 1mm thick section by using SS screw as per the direction of engineer in charge including conveyance

Bed Head Panel of size 1m, length, height 0-0.30cm and depth of 4". The aluminium powder coated with requirement colour for provisioin points of o2-2 No. Air 1 No. Vaccum 1 No. with double electrical socket with switch 2 Nos. with 2 set with IV - bottle holder fixing to the wall hanging including monitor stand etc., complete.

supplying and fixing of Stainless steel (Grade 304) water tank of 1000 litres capacity with shell thickness 0.60 mm complete complying with standard speicification and as directed by the departmental officers

Paving the floor with best approved quality fine polished Granite Stone Slabs of sizes of 4' x 2' and above 18mm to 20mm thick and synthetic grey, paradise and similar Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Dadooing walls with following best approved quality, granite tiles of synthetic grey, paradise, and similar/other varieties conforming to IS 15622 of sizes of 2'0 x 1'0 or 1'0 x 1'0 or 1'0 x 0'6 of 10mm thick in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Please Enable Macros to View BoQ information