ADDN/ALTN OF TOILET BLOCK P-169 AT 5/11 GR ADDN/ALTN OF CUP BOARD IN QTR NO. P-302/3 P-304/2 P-308/4 P-349/5 P-350/2 P-352/3 P-353/5 P-354/2 P-354/5 P-355/02 P-360/2 P-362/4 AND P-363/01 ADD/ ALTN OF TILING IN TOILET AND OTHER MISC B/R

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes of cement mortar (1:6) , complete all as specified and directed by Engineer-in-charge.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement , complete all as specified and directed by Engineer-in-charge.

M&L for Non skid coloured ceramic tiles 7to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in floors and skirting, set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-charge.

M&L for Glazed ceramic tiles in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-charge.

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and dircted by Engineer-in-charge.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and directed by Engineer-in-charge.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings (such as bend, elbows, tees, short pieces, connectors, diminishing pieces, caps, plug and union etc) and fixed complete to walls and ceilings or laid in floors or concealed in wall complete all as specified and directed by Engineer-in-charge.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings (such as bend, elbows, tees, short pieces, connectors, diminishing pieces, caps, plug and union etc) and fixed complete to walls and ceilings or laid in floors or concealed in wall complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore angle stop valves, cast copper alloy , chromium palted, screwed down high pressure with crutch and butterfly handles , screwed with iron pipes or for union complete all as specified and directed by Engineer-in-charge.

S&F in repair Conceeled stop cock,15 mm bore, chromium plated ,with long shank and cup, fancy type, complete all as specified and directed by Engineer-in-charge.

S&F in repair ,15 mm bore, Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair. PVC connection 15 mm bore with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-charge.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-charge.

S&F in repair plastic water closet seat, white, closed pattern ( seat & cover for Pedestal pattern) with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous China, pedestal pattern wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pip & drain pipe (or out goingpipe) and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified and directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed by Engineer-in-charge.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required, complete all as specified and directed by Engineer-in-charge.

M&L for 18/19 mm thick pre laminated PVC moulded solid PVC board as in shelf and shutter full size fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc, complete all as specified and directed by Engineer-in-charge. Make:- Rajshri plastiwood ltd, M/s Dura Plast Extraction Pvt Ltd or its equivalent as specified make. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.

S&F in repair CP clip on hinges (Inset), complete all as specified and directed by Engineer-in-charge.

S&F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium anodised, complete all as specified and directed by Engineer-in-charge.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, as in floors set and jointed in neat cement slurry pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-charge.

M&L vitreous China squatting pan, `Orissa' pattern of size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S&F PVC valveless syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe of 32 mm dia for low level complete all as specified and directed by Engineer-in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.

Surface excavation not exc 30 cm deep and avaraging 15 cm and getting out soft/loose soil complete all as specified and directed by Engineer-in-charge.

M&L for Hardcore of gauge of broken stones n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-charge.

M&L 100 mm thick Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade over 50mm laid sand cusion and joints grouted in Cement Mortar 1:4 finished smooth complete all as specified and directed by Engineer-in-charge. Make:- UNISTONE, NTC, NITCO, ULTRA, JOHNSON, SURYA K

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc,and brushing neat cement slurry with 3.0 Kg of cement per sqm. complete all as specified and directed by Engineer-in-charge.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.

M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm as in floors laid on 15 mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-charge.

M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-charge.

M&L Non skid coloured ceramic tiles 7to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-charge.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous China bowl urinal flat back, of size 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed by Engineer-in-charge.

S&F in repairs viterous china squatting pan 'ORISSA Pattern long pan size 580x440mm white with integral foot rests 'P' or 'S' Trap front or back inlet (excluding flushing cistern & flush pipe but including nahani/floor trap), complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) , white, including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and directed by Engineer-in-charge.

S&F in repair, vitreous china wash hand basin of size 550x400mm , white flat back, including waste coupling of PTMT 32 mm bore with suitable size of waste pipe, complete all as specified and directed by Engineer-in-charge.

S&F in repairs, bib tap, brass chromium plated fancy type, long body screwed down for iron pipe 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC waste pipe 32 mm bore, 650mm long plain/ corrugated including suitable adopter, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:6 of brick /concrete surface finished fair even and smooth wihout using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm thick rendering in CM 1:3 on ceiling and finished fair even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new plastered or unplastered surfaces of wall and applying two coats of colour wash, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old plastered or unplastered surfaces of ceiling and applying one coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old plastered or unplastered surfaces of wall and applying two coats of colour wash, complete all as specified and directed by Engineer-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

P R Constructions

m/s VK construction company

M/S.Parmod Johar

Balaji Constructions

M/S.M.S.Devi.Const.Co