Loading
Loading…
Loading…
Tender Value
₹5.9 L
EMD Value
₹11,757
Closing Date
16 Oct 2026, 3:00 pm7d left
EE,CD,APWD,CAR NICOBAR
Office of the Executive Engineer Construction Division APWD Car Nicobar
Repair and Renovation of 03 Nos. Type IV Quarters Qtr No. PK 540 45, PK 540 46 PK 540 52 under Medical Department at Perka, Car Nicobar
2026_APWD_25095_1
e-tender-DB/CD/CN/2026-27/2453
Open Tender
Civil Works - Buildings
Percentage
60 days
At Perka Car Nicobar
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹11,757
Yes
8 Oct 2026
8 Oct 2026
16 Oct 2026
8 Oct 2026
16 Oct 2026
9 Oct 2026
9 Oct 2026 - 10 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||||
| 1.01 | 300x16 mm | 6 | each | 556.65 | ₹3,339.9 |
| 2Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||||
| 2.01 | 250x10 mm | 6 | each | 161.05 | ₹966.3 |
| 3Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||||
| 3.01 | 100 mm | 6 | each | 86.65 | ₹519.9 |
| 4Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | |||||
| 4.01 | Twin rubber stopper | 6 | each | 196.1 | ₹1,176.6 |
| 5Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | |||||
| 5.01 | 30 mm thick plain PVC door shutters | 3.4 | sqm | 4,299.2 | ₹14,617.28 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
TenderDocument03.pdf
Tender Documents • 1.41 MB
BOQ_26548.xls
BOQ • 0.31 MB
Instructions-to-bidders.pdf
Additional Documents • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .