SPL REPAIR TO JCOS AND OR MD QTR (ROOF TREATMENT EXTERNAL PLASTER AND CERTAIN CONNECTED WORKS) IN BLOCK NO P-86, P-87 AND P-102 OF 131 SATA REGT AND SPL REPAIR TO SEWAGE TREATMENT PLANT (STP) INSTALLATION AT MAP COLONY AT NASIRABAD MIL STN.

Amount

Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound, on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement complete all as specified and directed. Noe : WPC shall be measured and paid separately.

M&L for preparation new decorated surfaces of walls for applying Two coats of weather coat paint over one coat of base/primer coat complete all as specified and directed.

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even,Incl preparation new decorated surfaces of walls for applying Two coats of weather coat paint over one coat of base/primer coat complete all as specified and directed

M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces Incl preparation new decorated surfaces of walls for applying Two coats of weather coat paint over one coat of base/primer coat complete all as specified and directed complete all as specified and directed.

M&L RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings complete all as specified and directed.

Use of waste form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.

Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

Dismantling of existing unserviceable RCC/PVC water tank and S&F 1000 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed.

S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.

Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed.

Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed Note : WPC will be measured and paid separately.

M&L roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 mircron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 3.0 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

S&F mild steel framed work such as grills, grating cooler stands, etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending for hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips conforming to all

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and fair (without using extra cement) over and including dubbing coat (if required) complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 5mm thick as in ceiling surfaces finished fair and even complete all as specified & directed.

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali&fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces including surface preparation complete all as specified and directed

M&L two coats of cement base paint over one coat of cement based primer on plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying, two coats of cement base paint over one coat of cement based primer on old wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash on plastered surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of white wash on wall surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for complete removal of existing treatment and applying three coats of white wash on ceiling surfaces complete all as specified and directed

M&L for 25 mm thick cement concrete, type B-0, 1:2:4 (Using 12.5mm crushed stone aggregate), finishing cement concerete surface even and smooth without using extra cement complete all as specified and directed

M&L, for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for kota stone slab 20-+25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete inlcuding 10 mm thick rendering in vertical surface of brick / PCC block wall in cement mortar 1:4 and including demolition of old kota stone dedo complete all as specified.

Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed

M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed.

M&L for sand filling 25mm thick under floors or in foundations inc. watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment coloured, reflective type of approved quality complete all as specified and directed.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m complete all as specified and as directed.

Demoliton of brick / stone masonary work built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L old size Brick work with Fly ash bricks straight or curved on plan exceeding 6m mean radius with old size bricks, built in Cement Mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on other than brick masonary surfaces in cement mortar 1:4 even and smooth without using extra cement complete all as specified and directed.

M&L preparation newly plastered wall surface and applying three coat of white wash on wall surface complete all as specified and directed.

M&L Providing PCC 1:3:6 type C1 using 20mm graded stone aggregate in foundation bed concrete of drain, suraface channels and drain pipe bedding and haunching complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping finished even and smooth without using extra cement and incl necessary form work complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class np2, laid and jointed complete with collars, complete all as specified and directed

Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth for foundation or laying/taking out existing pipe etc and getting out in any type of soil complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and as directed.

Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Taking up or down Gl steel tubing with all fittings connection, from trenches, walls, floors etc including cleaning for reuse, removal from site complete all as specified and as directed for the following sizes:-

GI pipe 100 mm bore

Gl pipe 80 mm bore

Refixing, connecting, jointing and testing of old serviceble GI Pipe with all fittings, laid in trenches/fixing to walls retrieved from item 4 of here-in-before complete all as specified and as directed of the following sizes:-

100 mm bore

80 mm bore

S&F tubes, medium grade (ISI marked), galvanized iron with and including all fitting (ISI marked) laid in trenches/fixed to wall/fixed on pillars, boring & use suitable ferrules for new/or as existing branch connection etc complete all as specified and as directed of following sizes:-

100 mm bore

80 mm bore

Cleaning the sorrounding area 40 mtr of STP installations by cutting and removing jungle sturts, roots, bushes plants small trees, sludge etc and deposited to n.exc 50 mtr to 100 mtr outside installations complete all as specified and as directed.

M&L painting of complete STP like mbbr tanks, tube settler tank, filter columns, pipe line E and induction motor Pump -04 nos, compressor -02 nos including complete Gl pipe by using scraping of old paint with emery paper, preparing old surface for painting, apply two coats of synthetic enamel paint in steel grey/ colour coded differently by using spray gun complete all as specified and directed.

M&L for MBBR media made of poly propylene with virgin plastic UV stabilized milky black C specific gravity 0.95 to 0.98 complete all as specified.

Servicing of Rotary type Air Blower pump capacity 300 KLD incl dismantling/taking down all electrical and mechanical connection of twin lobe blowers model No Blower (Make:- Air Weak), pressure 0.50 kg/cm and servicing hole body, change gear oil/lubricant and V belt, overhauling of the same including refixing and testing complete all as specified and directed. Note :-spare parts and gear oil/lubricant shall be including supply of following materials in rate quoted: (a) servo gear oil super 90 (b) Bearing as per sample for air blowers model (c) Gasket kit as per sample for air blowers model (d) Oil sealas & oil filter as per sample for air blowers model (e) V-belt as per sample for air blowers model (f) Air filters per sample for air blowers model

Complete cleaning, testing and commissioning of STP capacity 3 MLD including dismantling the choked MS pipes, SS riser pipes, air diffusers in equalisation tank and MBBR media, FAB tanks and refixing the same, providing with test report of treated water from govt. approved lab before completion of job. On completion providing training to the operators for operation of STP. Note : (a) The plant will be taken over after successful completion of trial run of 10 days. (b) The rates also include complete cement paint to concrete sructures. (c) Biological Chemical for FAB as per requirement at site.

S&F CI reflux ball valve (NRV) for 40mm bore pipe line screw end ISI marked complete all Ea as specified & directed

S&F in repair valve butterfly flanged conforming to IS-13095 complete of size 50mm dia with nuts bolts, washer, rubber gasket incl taking down old unsv complete all as specified & directed

S&F in repair valve butterfly flanged conforming to IS-13095 complete of size 80mm dia with nuts bolts, washer, rubber gasket incl taking down old unsv complete all as specified & directed

S&F in replacement of CI 50mm dia foot valve (screwed type) complete all as specified & directed

S&F in replacement of CI 150mm dia foot valve(Flanged type) complete all as specified & directed

Repair/Replacement of existing Hypo dozing system (Make E DOES) with PVC pipe line and testing after servicing of dozing system complete all as specified & directed

Supply, installation, testing and commissioning of centrifugal type pump set with motor upto 15 LPS at 60 m head with Cl casing, Bronze impellers, C-45 shaft, coupled with induction motor of suitable capacity not less than 20 HP, electric driven, 3 phase, 415 V, 50HZ, upto 2900 RPM and size upto 100 x 80 mm including suitable size factory made base frame for fixing of motor and pump, grouted in foundation with suitable size nuts, bolt & washers etc, and connecting with suction discharge water mains including taking out old pump set complete all as specified and as directed.

S&F in fully automatic star delta motor starter in sheet enclosure or fix type ML-03 E suitable for 20 HP electric motor 3 phase, 440 volts and 50Hz complete all as specified and directed. Make-Havells/L&T/Siemens.

Taking down old/unsv/burnt out air compressure motor for capacity of 10 HP, 3 phase 415 volts and rewinding & fixing of existing size of motor with supper enameled copper winding wire as per existing size and truns etc including all the insulating materials le. varnish, cotton, tape, insulating paper and soldring etc all as specified and directed.

Taking down old/unsv/burnt out motor for capacity of 5 HP, 3 phase 415 volts and rewinding & fixing of existing size of motor with supper enameled copper winding wire as per existing size and truns etc including all the insulating materials ie. varnish, cotton, tape, insulating paper and soldring etc, all as specified and directed. Make Copper wire: ATLAS/DEVIDYAL

Replacement of unserviceable Thermal relay with 3 Pole Thermal relay type RTX3 40A for Star Delta starter suitable for 12.5/10HP moter thermal over Load relay ranging from 22 A to 32A Amps Make As per existing

S&F of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 10 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor with suitable lugs made of copper connected to earth dolly.

Replacement of unserviceable contactor with 3 Pole Contactor type CTX3 of cap 18 A for E star delta starter suitable for 12.5/10HP moter Make As per existing

Supply and fixed in replacement of defected/ burn out /unsafe internal starter wiring complete panel with suitable size copper single core wire with copper lux incl replace of defective phase connector complete all as specified & directed

Shree Sai Ram Enterprises (BID ID -3497365)