Development of Indoor Stadium of 2600 Seating Capacity with a Cricket Net Practice Facility at V.O. Chidambaranar Port Authority

Schedule - A - Indoor Stadium with Landscape at Sports Complex VOC Port

CIVIL WORK: Clearing scrub Jungle and Surface dressing of the Floor. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders etc., As per SS 20B excluding hard rock requiring blasting Inclusive of 17,23 shoring shuttering, baling out water where ever necessary 24 and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. Back filling with available filling

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. back filling with brought from out side

Providing and constructing cast-in-situ hydraulic bored piles of specified diameter in accordance with the Structural Engineer’s drawings and directions, but excluding reinforcement and concrete, including cost of mobilization of all necessary plants and equipment such as piling rigs, temporary casing of appropriate length for setting out cardinal points and removal of the same, boring in overburden through all strata up to the required foundation level of piles using bentonite mud circulation technique or any other approved method, complete as approved by the Departmental Engineer. The item includes dewatering, disposal of bored material outside the site, careful chipping and cutting off excess pile portion as required without damage to the piles, dressing the pile top, and removing all debris from the site, including cost of all tools, plants, conveyance, labour, lead and lift, etc., complete as directed. Conducting Standard Penetration Test (SPT) to identify the refusal strata for at least one pile per group and for at least 25% of the total piles, comparing the same with refusal strata identified in the soil investigation report, and providing socketing into refusal strata by 1.00 m or into hard rock by 100% of pile diameter. (Length of pile for payment shall be measured up to the bottom of the pile cap). Pile 24'' Dia

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Providing and Laying the Plain Cement concrete 1:4:8 (One cement Four sand and Eight broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for foundation and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., including laying,compacting curing etc.,complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering ,shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts etc..

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. For column etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. Stadium

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. Stadium

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. Stadium

Plastering 12 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine P.sand) according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 15 mm thick for external surfaces with cement mortar 1:5 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Painting the Ceiling with Two coats of first quality Plastic Emulsion paint of approved colour over one coat of primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Ceiling & Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and Installation of FIFA approved Synthetic Football Turf with UV resistant from America, Europe and Australian region only conforming to FIFA Quality Standard as per their Latest Technical Specification FIFA 15. including SBR Rubber granules as per manufacturer’s recommended quantities, unloading and staging of rolls, sewing of seams, infilling with appropriate dispensing, spreading and leveling equipment, brushing of fibers with all polly hydraulic controlled equipment, painting of any lines with approved synthetic turf paint. Approved Makes - DOMO / PLAYRITE

Cement concrete flooring 1:2:4 (1cement : 2 sand : 4 well graded stone aggregate 20 mm size) finished with a floating coat near cement including cement slurry etc. complete Rate includes the cost of nosing of steps etc. 40mm thick with 20mm nominal size stone aggregate. Rate also includes 1mm Self levelling epoxy with Grey Coloured pigments for heavy tracfic area

Supplying and laying of Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. (Including Skirting)

Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying with the best quality approved Wooden Flooring over existing screed flooring as per site condition. Flooring plank of size 240 x 50cm 98% natural raw material as per the company specification. Rate incldues 1mm foam, Screed Concrete, Interlocking plank, Edge beeding, T Profile etc complete.

Supply and Laying flooring with best quality approved colour 18mm thick Flamed Steel Grey Granite Slab for Staircase of available size not less than 1220 x 600 mm machine cut and set in C.M 1:4 (1 of cement: 4 of manufactured sand) 20 mm thick topped with white cement slurry (for surface contact of the bottom of the granite slab) as per approved pattern, including finishing the joints with matching shade, cement slurry, cutting, edge chamfering and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum/Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-incharge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fiting the sunken slab area by Broken bricks by adding CICO NO 1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE Acrylic Polymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturer's specification after entire completion of laying pipes, sanitary fittings etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc as complete with all respects complying with relevant standard specification and as directed by the Client/Engineer-in-charge. Including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturer's specifications and as directed.

Providing and fixing at site Power coated Sleek Aluminium framed Door with 8mm toughened glass. Rate includes sealant at all edges, gaps, wherever necessary as per the site condition, all materials, labour etc complete.

WPC Door frame : Specification: Providing factory made Pre Laminated WPC Door Frame of the size 100 X 60mm with a Density of 900 kg/cum wall thickness of 11mm made out of 70% of virgin polymers, 15% of mineral fibers and rest 15% of additives and requisite chemicals. with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Complete complying with the standard Specification. the door frame should be got approved from the Executive Engineer before use on work. Providing of 35mm thick factory made pre-laminated WPC Flush Door Shutter, with PCV LAminate of inner end and 1mm laminate on external side, 100% waterproof, termite-proof, durable, and offering sound and thermal insulation resistance to moisture, bugs, and aging, and their eco-friendly nature. Mortise Lock with 12" SS Tower bolt, 5" SS Hinges - 4 nos The door shutter and frame should be got approved from the Executive Engineer before use on work

Providing & fixing at site Flush door shall be of 32.0mm Commercial grade flush door with 1.0mm lamination on both the sides, and central portion to have 8.0mm plain float glass to be fixed with help of teak wood beadings. The Door is to be fixed to existing wooden partition/wall with heavy duty 5" Stainless Steel hinges, and shall have godrej Or equivalent mortice lock. All the edges of the door to be covered with 35 x 12 mm Teak wood beadings, The cost shall include Frame of 1st class Teak wood Frame of 150mm x 50 mm, all labour, materials, mortice lock, tower bolt inside, door stopper, Door Closer strictly as per the given design & drawing etc complete.

Providing and fixing at site 12.0mm toughened glass fixed glazing to be fixed with SS patch fittings at the site including filling of silicon sealant at all edges, gaps, wherever necessary as per the site condition, all materials, labour etc complete.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing of Stadium Perimeter LED Display Curved Splicing Multi - angle adjustment of pixel P8mm Display size 960mm x960mm panel, Waterproof, Smooth wheels for movement, ARC Lock, Anti Collision, High pixel 160 x 90 resolution refresh rate 3840hz SMD3535. Panel made of die casting magnesium

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25 alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supply and Fixing of Back Lit Fabric with Digital Print as per the 3d images.. Rate includes Aluminum Boxing, Branded 5yr warranty LED Strip. Rate includes Adapter, Transformer, Scaffolding, Installation charges all lead, transport etc Complete

Supply and fixing in position of Hot rolled structural steel Members/ Sections consisting of MS joists, channels, angles, purlins, pipes, hollow tubes, runners, insert plates, etc. at all levels. Surface preparation of all MS members by Sand blasting to SA 21/2 grade and painted with anti corrosive, PU paint (metallic finish) with compatible primer to a minimum film thickness of 75 microns and 2 coats of PU paint of and total dry film thickness 225 microns Rate to including all Lifts, wastage, cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for, and the rate to include preparation of fabrication shop drawings for owner's approval. etc., as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

Cost towards supply and fabrication of 50mm Rigid Polyurethane Foam (PUF or PUR), CFC-free Puff Panel, Core typically 40kg/m2. Rate includes connecting z clips, Tongue and Groove (T&G) or Cam-lock system for airtight seal for roofing system and Polyisocyanurate (PIR) core panels for side walls. Rate includes all labour, material, lead, transport etc complete.

Supply and Fxiing of PTFE (Teflon) coated fiberglass fabric with high-temp resistance (up to 260°C, non-stick surface, chemical inertness, high tensile strength, and low friction, combining strong fiberglass with PTFE's non-stick & chemical resistance; thickness .55mm at operating temps, weave pattern (plain) with non-porous (solid) forms, Tensile Strength: High strength from the fiberglass core, low elongation. UV/IR resistance, food-safe (non-toxic), anti-fungal.

Fire Extinguisher: Supply and fixing of Water CO2 stored Pressure Type 9 liters capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT. 150mm Dia Pipes - Hose Reel

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT. 80mm Dia Pipes - Hose Reel

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX /

Supply, installation, testing and commissioning of Micro Processor based conventional 8 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

LANDSCAPE: Landscaping Plantation work: Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Shrubs

Supply and fixing of 120Litre Heavy duty trash can with specially designed bottom for minimizing the breakage and UV protested colour from sun rays. The trash can is fitted with wheel at bottom for easy mobility. The strong lid with smooth curved upper surface for perfect fit to ensure preventing unwanted smells to escape and rain water to seep through. The rate is inclusive of transportation, laoding and unloading charges.

Supply of Compactor 1100 Litres Bin made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

INTERIOR WORKS: Supply Providing and fixing GYPSUM BOARD FALSE CEILING in levels as per the detailed drawing - made up of G.I frames as specified by Gypsum India/Saint -Gobain Gyproc and 12mm thick Gypsum board with suitable suspenders fixed to the ceiling. Ceiling section, perimeter channel of size 20X27X30 mm and 0.55 mm thick for light fittings, AC Grills, diffusers, suspenders etc. shall be standard sections supplied by Gypsum India/ Saint Gobain. Spacing of intermediate channels shall be at 1200 mm c/c and ceiling section at 457 mm c/c. The work includes taping and jointing, applying primer, two or more coats of plastic emulsion paint of approved shade ICI/ ASHIAN PAINTS make, making cut-out for light fixtures /fittings, etc. The Final coat shall be done with FOAM ROLLER and no brush marks should be visible. Providing of perimeter channels / beading etc. as per drawing complete in all respects.(All measurement in sqft only and finished surface area shall be measured)

Laminate Panel - Supply and Fixing of Laminated Panel using made of 12mm ply finished with 1mm laminate. 12mm Ply is supported using 19mm ply fixed on to the wall/Ceiling. Plywood should be of phenol bonded, BWR grade Anti-termite proof and best quality, Non visible surface of the ply is finished with Wood primer. Screw holes is covered using same laminate buttons. Rate includes all support ply, Cove Provision, adhesive, shifting of materials, transport etc complete.

Fluted Panel - 4.5" x 10' Providing and fixing Charcoal / WPC Finished Readymande Interlocking fluted panel over 12mm ply. 12mm ply fixed directly onto the wall. Rate includes all necessary materials, labours, transport, scaffolding, etc complete.

Laminated Rafters: Supply and Fixing of Rafters of size 6" x 4" fixed to the false ceiling with proper support. Rafter made of 19mm ply finished with 1mm laminate of approved shade, color and texture. Rate includes all necessary hardwares, labour, material etc complete.

Cost towards supply and fixing of Wall Paper as per the apporval or based on the 3d. Rate includes adhesive etc complete

Storage: Supply and Fixing of Full Height File Storage as per the design. Storage made of 19mm ply finished with 1mm laminate fo approved shade, color, texture on all visible surface, Carcase made of 19mm ply finished with .8mm laminate as per the drawing. Rear ply can be of 8mm with 2mm acrylic as water protection. Rate includes all hardwares like hinges, handle, Knob, lock etc complete.

Supply and fixing of 2mm PVC Foam board multicolor printed Poster, Rigid, Waterproof, smooth matt finish with density of .5g/cm³, Fire retardant as per norms of ASTM E84.

Supply and fixing of PVC Printed Vinyl sticker as per the 3d using 130 GSM matt finish Vinyl. Printing at 4800 dpi high resolution with 10 color printing process.

Supply and fixing of EVA Interlocking Mat over walls and floors using proper adhesive for walls as per the manufacturer specification. Rate includes ll lead, transport, labour material, scaffolding etc complete

Stadium -Seat - Moulded HDPE seats Retractable suitable for use in both shelters and stadiums. Weatherproofed, UV treated, flame-retardant, impact-proof and UV-resistant for long life to provide additional durability in any condition throughout the seasons. Rate includes fixing the same using bolt with Fisher chemicals.

Officer Table : Supply and Fixing of Modular Officer Table with side storage - Table and Storage made of 19mm ply finished with 1mm laminate on all visible surface and .8mm laminate on all internal / invisible surfaces. Storage with mid shelves made of 19mm ply finished with .8mm laminate. Rate includes keyboard tray, CPU Trolley etc complete. Size 1.8m x 0.75m + Side Storage - 1.95m x 0.45m x .7m

Worstation : Supply and Fixing of Modular Workstation, Workstation top made of 19mm ply finished with 1mm laminate. Workstation Legs are amde of aluminum finish white power coated. Rate includes Glass divider. Rate also includes keyboard tray, CPU Trolley etc complete. Size - 1M x 0.6M x .75M (ht) + 0.3M Glass Height

Office or ergonomic chairs - Cost towards supply and fixing of high-end chairs with a tall, high back, finished premium materials Like faux leather. luxurious padding and formal, sophisticated aesthetic prioritize comfort with flexible support and ergonomic contouring for long-duration use. Executive Chair with High Back - Officer

Office or ergonomic chairs - Cost towards supply and fixing of high-end chairs with a tall, high back, finished premium materials Like faux leather. luxurious padding and formal, sophisticated aesthetic prioritize comfort with flexible support and ergonomic contouring for long-duration use. Workstation Chair

Lounge Area - Cost towards supply of sofa as per the image. Rate includes all lead transport, lifting etc complete. 2 Seater Sofa

Lounge Area - Cost towards supply of sofa as per the image. Rate includes all lead transport, lifting etc complete. 3 Seater Sofa

Lounge Area - Cost towards supply of sofa as per the image. Rate includes all lead transport, lifting etc complete. 1 Seater Sofa

Tennis Coat Bench with shelter

GYM Equipments

Billiyards

Table Tennis

Carrom Board with Table and 4 chair

Chess Board with Table and 2 chair

Plumbing Works: Providing and fixing Drainage Channel System of 125 mm bore slotted Channel manufactured from polyester resin concrete in 1000 mm length,straight,complaint with DIN 18033-3 and IAAF regulations.The channels should be coatable from one side with a abutment rail.Overall Height = 16.0cm,Overall width = 20.0cm,Overall Length = 100.00 cm,Weight = 29KgACO( cat Nos 15519) or equivalent.

Providing and fixing of Glass Reinforced Plastic kerb tops for Slot Channels, straight,with Screw Arrangement for fixing in the Channel and extended edge on one side ACO (cat Nos 00363) or equivalent.

Supplying & fixing in position 15 mm dia brass/ C.P screw down / C.P Pillar Tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work). 15mm dia CP Pillar Tap (IWC)

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) 20mm Dia Cpvc Pipes

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) 25mm Dia Cpvc Pipes

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal,External&Rain water system) 110mm Dia

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal,External&Rain water system) 75mm Dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necesscary brick work and plastering wherever necessary scaffolding charges above ground level upto 4 m height. (Internal,Terrace&External Water supply ) 32 mm Dia Upvc Pipe

Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements. 32 mm Dia

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. Internal Toilet Entry & Terrace 32 mm dia

Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table’E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER /EQUIVALENT. 32mm dia

Supplying & fixing in position C.I.Nahini trap /Floor trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Supplying & fixing in position CP Wall Mixture Tap 3 in 1 system with Hand Showers, CP Shower Arm with Overhead Shower Rose, Rate includes all necessary material, labour etc complete.

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works) JAQUAR ORISSA PAN

Supply and fixing in position white European Water Closet of Jaquar make with Soft close double flapped seat cover, pan connector with comprising the P- trap/"S" trap, C.P brass hinges and including labour, all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and packing the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of EWC should be got approved by Concern department Engineer before use on work. complete complying with standard specification and as directed by the Departmental officers KUS-WHT-35851S300UF

Wash Hand Basin of size 565 x 425 x 140 mm with all accessories such as 32 mm Dia C.P. Waste coupling, Rubber plug, Bottle Trap, Silicon, White Cement etc., KUS-WHT-35935

Supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern department Engineer before use on work.

Supply , installing, Testing & commissioning 15mm nominal bore CP brass angle valve of approved make or equivalent as directed by the Engineer-in-charge.

Supplying and fixing best approved best quality Soap Dispenser complete complying with standard specifications. (The soap Dispenser should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supply and Fixing of BIO Septic Tank - 6000 Ltr Capcity Rate includes maintanance till project completion

Hydropnuematic System - for external and Stadium Toilet and RO UV Water Cooler

Supply fixing, texting and commisioning of RO UV Water cooler with 120 ltr capacity of 3 faucet, 90 LPH Purification capacity, min 3 stage water purification. The rate includes the cost of Material, labour charges, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

AIR CONDITIONER: Supply, Installation, Testing and Commisioning of 16.5 TR Non Inverter Ductable Unit R410 gas (Model : FDR200FRY16) (1 Indoor with 2 Outdoor Unit), Rate includes Copper pipr, Drain pipe, Electrical Conduit, Electrical Wire, Communication cable, Support necessary for hanging from Ceiling, Necessary Diffuser, Return grill as per the Drawing. Rate includes duct made of 22G and 24G Galvanised Steel Duct, including Collar, Damper, Grills. Rate also includes insulation using 10mm open cell for Acousting insulation class 1 and 13mm nitrile sheet class o closed cell for Thermal insulation fixed using FRP tape, Sealant, Paste etc, Rate is inclusive of all necessary support, scaffolding, lead, transport, shifting, lifting etc complete. 16.5 Tr Ductable Unit - 1Nos and 8.5 Tr O.D.U - 2 Nos

Supply, Installation, Testing and Commisioning of VRV-X Outdoor Unit 60HP, VRF grade COPPER REFRIGERANT PIPING with R410A Gas filling, rubber pad for O.D.U etc complete. 60HP VRV O.D.U

Supply, Installation, Testing and Commisioning of Casette AC, Rate includes Copper pipr, Drain pipe, Electrical Conduit, Electrical Wire, Communication cable, Support necessary for hanging from Ceiling, Rate also includes insulation using 10mm open cell for Acousting insulation class 1 and 13mm nitrile sheet class o closed cell for Thermal insulation fixed using FRP tape, Sealant, Paste etc, Rate is inclusive of all necessary support, scaffolding, lead, transport, shifting, lifting etc complete. Round Flow casette AC - 3.3 Tr

Supply, Installation, Testing and Commisioning of Casette AC, Rate includes Copper pipr, Drain pipe, Electrical Conduit, Electrical Wire, Communication cable, Support necessary for hanging from Ceiling, Rate also includes insulation using 10mm open cell for Acousting insulation class 1 and 13mm nitrile sheet class o closed cell for Thermal insulation fixed using FRP tape, Sealant, Paste etc, Rate is inclusive of all necessary support, scaffolding, lead, transport, shifting, lifting etc complete. Round Flow casette AC - 4.1 Tr

Schedule - B - Providing electrical installations for INDOOR SPORTS at SPORTS COMPLEX OF VOC PORT Tuticorin

ELECTRICAL WORKS: LT PANELS: Supplying,erecting, connecting and commissioning all metal floor mounted CT Meter Board incorporated with the following. The cost of the foundation channels shall also be included in the rate. The cost.3Nos.300Amps TP cutouts with 250Amps neutral link propoersly fixed on the sheet steel with necessary accessories with 250Amps 4P Aluminium Busbar. The Phase busbar shall be 50x6mm and the neutral busbass shall be 50x6.The Board shall be provided with 2Rus of 25x6mm Aluminium busbars of earthing.Space for fixing 01No. energy meter with CTs coil of 250/5A and CL 1.0, And other necessary accessories. CRCA sheet Thickness : 14SWG for door and Frames 16SWG for others. Foundation Channel - 3mm thick Cable Gland - 14SWG Painting: Powder Coated RAL 7032 and Black Color for the foundation channel.

Supplying,erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE DG PANEL with necssary foundation channels, etc., The cost shall also including unloading, positioning,etc., The Board shall be incorporated with the following:- INCOMER:400AMPS TP+NL 36kA MCCB - 1No. OUTGOING: 200AMPS TP+N 36kA MCCB …3Nos. 160AMPS TP+N 36kA MCCB …1No. BUSBARS : ALUMINUM RATING : 400 AMPS The Phase Bus bar shall be of 50 x 12mm. and the Neutral bar shall be 50 x 12 mm. The Earth Bus bar shall be 2 Runs of 25 x 6mm. There shall be One set of Metering Compartment incorporated with the following:- i) 3 Nos Tape wound CTs of ratio 400 /5A and Class 1. 0 for Metering and burden 15 VA. ii) 1 No. Class 1.0, 96 Sq.mm. Digital Muilt function meter ( V, A, f, Kwhr ). iii) RYB Indicating Lamps of LED Clustered type and Control MCBs shall be provided. CABLE ENTRY : TOP / BOTTOM

Supplying,erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE MAIN PANEL with necssary foundation channels, etc., The cost shall also including unloading, positioning,etc., The Board shall be incorporated with the following:- INCOMER:315AMPS TP+N 36kA MCCB - 1No. OUTGOING: 250AMPS TP+N 36kA MCCB …2Nos. 200AMPS TP+N 36kA MCCB …1No. 160AMPS ATS....1No. 200AMPS ATS....1No. BUSBARS : ALUMINUM RATING : 315 AMPS The Phase Bus bar shall be of 50 x 12mm. and the Neutral bar shall be 50 x 6 mm. The Earth Bus bar shall be 2 Runs of 25 x 6mm. There shall be One set of Metering Compartment incorporated with the following:- i) 3 Nos Tape wound CTs of ratio 315 /5A and Class 1. 0 for Metering and burden 15 VA. ii) 1 No. Class 1.0, 96 Sq.mm. Digital Muilt function meter ( V, A, f, Kwhr ). iii) RYB Indicating Lamps of LED Clustered type and Control MCBs shall be provided. CABLE ENTRY : TOP / BOTTOM

Supplying,erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE POWER PANEL with necssary foundation channels, etc., The cost shall also including unloading, positioning,etc., The Board shall be incorporated with the following:- INCOMER:200AMPS TP+N 36kA MCCB - 1No. OUTGOING: 125AMPS TP+N 36kA MCCB …1No. 63AMPS TP+N 36kA MCCB …13Nos. BUSBARS : ALUMINUM RATING : 200 AMPS The Phase Bus bar shall be of 40 x 12mm. and the Neutral bar shall be 40 x 6 mm. The Earth Bus bar shall be 2 Runs of 25 x 6mm. There shall be One set of Metering Compartment incorporated with the following:- i) 3 Nos Tape wound CTs of ratio 200 /5A and Class 1. 0 for Metering and burden 15 VA. ii) 1 No. Class 1.0, 96 Sq.mm. Digital Muilt function meter ( V, A, f, Kwhr ). iii) RYB Indicating Lamps of LED Clustered type and Control MCBs shall be provided. CABLE ENTRY : TOP / BOTTOM

Supplying,erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE LIGHTING PANEL with necssary foundation channels, etc., The cost shall also including unloading, positioning,etc., The Board shall be incorporated with the following:- INCOMER:160AMPS TP+N 36kA MCCB - 1No. OUTGOING: 63AMPS TP+N 36kA MCCB …9Nos. BUSBARS : ALUMINUM RATING : 160 AMPS The Phase Bus bar shall be of 25 x 12mm. and the Neutral bar shall be 25 x 6 mm. The Earth Bus bar shall be 2 Runs of 25 x 6mm. There shall be One set of Metering Compartment incorporated with the following:- i) 3 Nos Tape wound CTs of ratio 160 /5A and Class 1. 0 for Metering and burden 15 VA. ii) 1 No. Class 1.0, 96 Sq.mm. Digital Muilt function meter ( V, A, f, Kwhr ). iii) RYB Indicating Lamps of LED Clustered type and Control MCBs shall be provided. CABLE ENTRY : TOP / BOTTOM

Supplying,erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE AC PANEL-1 with necssary foundation channels, etc., The cost shall also including unloading, positioning,etc., The Board shall be incorporated with the following:- INCOMER:200AMPS TP+N 36kA MCCB - 1No. OUTGOING: 63AMPS TP+N 36kA MCCB …19Nos. BUSBARS : ALUMINUM RATING : 200 AMPS The Phase Bus bar shall be of 40 x 10mm. and the Neutral bar shall be 40 x 6 mm. The Earth Bus bar shall be 2 Runs of 25 x 6mm. There shall be One set of Metering Compartment incorporated with the following:-i) 3 Nos Tape wound CTs of ratio 160 /5A and Class 1. 0 for Metering and burden 15 VA. ii) 1 No. Class 1.0, 96 Sq.mm. Digital Muilt function meter ( V, A, f, Kwhr ). iii) RYB Indicating Lamps of LED Clustered type and Control MCBs shall be provided. CABLE ENTRY : TOP / BOTTOM

Supply, Erection, Testing and Commissioning of 250KVA Diesel Generator set with AMF control panel, comprising of Water cooled CPCB developing @ 1500 RPM and Alternator, complete with type approved canopy and all accessories. with the following technical specification: *Industries most reliable engines, proven over decades. *Low emission, High efficiency. *Compact, robust and rugged design. *Engine Dry type air cleaner *Exhaust Silencer (Residential type) Hospital Grade. *Expansion bellow *Lube oil cooler Lube oil filter (“Spin-on” type) *Fuel Filter (“Spin-on” type) *In line mono block fuel injection pump with Electronic Governor and fuel feed pump. *Dynamically balanced Flywheel with starter ring *Electronic Governor :Governing class G2(as per ISO 8528 part V) *SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator. *Exhaust gas turbocharger 24 Volt electric starter motor 24 Volt, 18 amps. Battery charging alternator *Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button. ALTERNATOR *Exhaust gas turbocharger 24 Volt electric starter motor 24 Volt, 18 amps. Battery charging alternator *Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button. ALTERNATOR 250KVA, Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 250 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank: 300 Letters Capacity inbuilt Fuel Consumption: 100% = 37.6 Litres/hr.75% = 27.6Litres / hr.50% = 19.8Litrs/hr. Battery: 24V DC, 130AH Supply of AMF Control Panel Suitable for 250 KVA DG set for EB Services with byepass arrangement. (Make: Kirlosker, Koel or equvalent) including Suitable Foundation and Transportation charges.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End

Supply and fixing of 7 segment 6 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no 63A. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no.63A 4 pole ELCB / RCD (totally 8 ways in one segment) 3Nos 63A 2pole MCB(3x 6 ways in each segment) and 24nos.6A to 32A SP MCBseperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.

VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and laying of following XLPE armoured HT / LTUG cable in a Earth / Trench / Tray with suitable cable tie tag etc as required. Supply and laying of 31/2 core x 120 Sq.mm PVC armoured LTUG cable in tray or wall with MS Clamp.saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 3 1/2C x 50 sq.mm. PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 3 1/2C x 25 sq.mm. PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection. Supply and fixing of brass cable gland for 3 1/2 C x 120Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland suitable for 4C x 10 PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 3 1/2 C x 240 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 95 Sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. HT / LT Cable) Supply and providing cable end termination of 3 1/2 Core x 120 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 50 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 4 C x 70sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 Cx10 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 Cx16 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 Cx240 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 Cx95 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 32mm PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 2 of 4 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 32mm PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 32mm PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.(Primary Point)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End.Secondary

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 1no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting, grouting,flushing and making good on the wall. Higher End.

Supply and fixing of 2no.6A two module 5 pin socket , 2 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting, grouting,flushing and making good on the wall. Higher End.

Supply and fixing of 1no.6A/16A two module 5 pin socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting, grouting,flushing and making good Cocealed the wall. Higher End.

Supply and fixing of 2nos.6A/16A two module 5 pin socket , 2 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting, grouting,flushing and making good Cocealed the wall. Higher End.

Supply and fixing of25A Flush type Wall Socket 25ADPMCB complete set for ACP lugin flush with wall with earthconnection (For AC Plug)

Indoor / Outdoor Light fittings: Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and fixing of 20W LED Panel light 6500 K including driver, inter connecting wiring including accessories etc., complete.

Supply and fixing of 12W LED Surface Mounted light 6500 K including driver, inter connecting wiring including accessories etc., complete.

Supply and fixing of Decorative down light LED @ Conference Room including driver, inter connecting wiring including accessories etc., complete.

Supply and fixing of Cylindrical COB down light LED 15W 6500K @ Conference Room including driver, inter connecting wiring including accessories etc., complete.

Supply and fixing of LED Concealed indirect Profile ambience Light 12mm Depth with 220 Counts per M LED Strip, Color - 4000 K at false ceiling areas as per the design. Rate including driver, inter connecting wiring, Soldiering the LED Strip or using connector, including accessories etc., complete.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required.

EARTHING SYSTEM: Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp.

Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement ) 7500X50mm Perforated Tray

CCTV Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR 1no with 8TB Hard Disk Drive 2nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire /ship / temperature / temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).

Supply of 8MP, Internet Protocol fixed BULLET /Dome CAMERA with Indoor and Out door following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Laying of CAT 6 armoured cable in 50mm dia HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000 Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supplying and concealing modular type RJ socket with top pin with suitable with concealed type manufacturer's GI metal back box and modular socket in flush with wall mounted on poly carbonate front plate with socket mounting metal parts, for making good of the concealed portion with suitable colour.

Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack.

Supply and Fixing of Rack with Accessories -Higher end 9 U Rack with LNS unit and fan extra for the above rack.

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up with stand

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent)

Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent)

Supply and run of 2core 1.5 Sqmm armoured speaker cable with 25mm PVC pipes on wall, tray and ceiling etc. complete.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.

Safety Accessories Supply of 2m x 1m Rubber 3mm thick Mat suitable for LT installation confirming to IS

Supply of First Aid Box complete with all First Aid Medicines

Supply of Shock Treatment Chart fixed in glass frame

Supply of 1 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

Supply of Hand Gloves 11KVGrade

Supply of Danger Board as required by the Electrical Authorities

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Earth Discharge Rod

Lightning Rod Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field. The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is available to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level

MOUNTING STRUCTURE Supply of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter

TEST LINK Supply of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance

SURGE PROTECTION Supply and installation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lightning switching action etc. they must be installed in the incoming MCC panel / DB of the respective building in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)

Capaciator Supply and Fixing of 60kvar Capaciator to the CT panel with necessory accessories etc.,

Supply and Fixing of Miniature Circuit Breaker for A/C Outdoor Controllers etc., 63A 4P RCCB

Supply and Fixing of Miniature Circuit Breaker for A/C Outdoor Controllers etc., 32A 4P MCB

EARTHING Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp (M-2144)

Schedule - C - Providing CRICKET NET PRACTICE with PARKING AT SPORTS COMPLEX - VOC PORT

CIVIL WORK: Clearing scrub Jungle and Surface dressing of the Floor. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders etc., As per SS 20B excluding hard rock requiring blasting Inclusive of 17,23 shoring shuttering, baling out water where ever necessary 24 and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Filling with 30 to 40mm gravel aggregate in cricket pitch excavated trenches with intial lead 10mts in layers not exceeding 230mm thick which includes consolidating and deposting in layers ,watering ,compacting with 10tonnes roller which includes cost and conveyance of water, material, operational, incidental, labour charges

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. Back filling with available filling

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. back filling with brought from out side

Construction of Granular sub-base of 125mm compacted thickness by providing laying, spreading and compacting of Close graded Material conforming to Grading V of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.

Construction of Granular sub-base of 125mm compacted thickness ( Drainage Layer botom most) by providing laying, spreading and compacting of Open graded Material conforming to Grading III of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.

Construction of Wet Mix Macadam 250mm compacted thickness in two layers by providing , laying , Paving , and compacting of aggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensor pavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work.

Providing and construction of Dry Lean Concrete Base course of 150 mm compacted thickness over a prepared sub base with coarse and fine aggregate conforming to IS 383 as per table 600-1 of MORTH specification produced in a batching plant and conveyed in tippers to the laying site with a moisture content as per the design mix and laid with mechanised paver finisher and compacted with a 8-10 tonne vibratory roller to the requisite grade and levels as specified in drawings with adequate curing by covering the surface with hessen cloth and keeping it wet for 7 days. The design mix shall be such that the average compressive strength of each consequetive group of 5 concrete cubes shall not be less than 7Mpa at 7 days. In addition the compressive strength of any individual concrete cube shall not be less tha 5.5 Mpa at 7 days. The concrete mix shall be proportioned with a maximum aggregate cement ratio of 14:1 where OPC is used and 12:1 where PPC or PSC is used. The minimum cement content shall not be less than 140 Kg/Cum of concrete. The rate shall include for all incidentals as specified in clause 601.12 of MORTH

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Providing and Laying the Plain Cement concrete 1:4:8 (One cement Four sand and Eight broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for foundation and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., including laying,compacting curing etc.,complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering ,shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts etc.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. For column etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. Stadium

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. Stadium

Plastering 15 mm thick for external surfaces with cement mortar 1:5 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying with Bricks bats for Cricket pitch areas defined indicated in technical specification placed after settlement ,watering and levelling etc

Supply & filling with Cricket ground pitch areas with soil mixture includes black /clay soil /morrum etc in the proporation ratio (1:1:1 ) making 1 parts of black /clay soil , 1 part of red soil & 1 part of morrum soil as indicated in technical specification .rates includes watering , laying and all charges ( 5th layer )

Supply & Stacking the black cotton soil having Clay content 30% to 40% for cricket pitch at source near Tadeppalligudam to Gollavaniguta project site including royality charges and carriage up to 550kms lead complete ( Earth measured instacks will be reduced by 20 % voids ) note : -The soil test of the soil sample shall be carried out at the source ( Before supply at Site ) and at Gollavaniguta site .The test reports of the soil sample of source to be provided to client before supply the same at Site

Supply and Installation of IAAF approved, 15mm thick (Full PUR Cast-In-Situ) Synthetic Athletic Track Surface with SmarTrack Technology withClass-II certification by IAAF for Outdoor Running Track of 400m, including marking on the surface as per latest specifications of IAAF. The Installation Contractor shall provide the satisfactory Material Test Certificates from IAAF accredited Laboratory according to latest code of practice of IAAF, and obtain the Class-II certification for the Athletic Track. The Installation Contractor shall follow the Manufacturer's Specifications and Recommendations as regards to curing temperature, time and and moisture content in sub strate and weather condition. Approved Manufacturer Make: KONICA (Germany) / PORPLASTIC (Germany) / REKORTAN M 99 (USA) / EPI (Netherlands) Approved Makes for Ingredients: EPDMGranules (TERRA COTA colour) PORPLASTIC GmBH (Germany) / OTS (USA) SBR Granules (Black colour) PORPLASTIC GmBH (Germany) / OTS (USA) / MELOS GmBH (Germany) PU (Polyurehane) PORPLASTIC GmBH (Germany) / ADVANCE POLYMER TECHNOLOGY (USA) / BASF (Germany) All the Ingredient materilas shall be approved by the Manufacturer, the installation contractor shall check the quality of all the materials with their shelf life etc. before procurement of the same on Project site. The Manufacturer and Installer shall be approved by The Engineer-In-Charge.

Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Engineer-in-charge.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

FOUR BAY - EACH SIZE 6M WIDE x 44Mtr • 42 mm diameter x 3mm galvanised steel uprights and toprods, 3.66m long toprods complete with 11 net hanging hooks, 450mm deep steel sockets fitted with stabilising base plates, A heavy duty tube clamp is supplied with each upright, Garware HDPE net 2.5 mm thick

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Shrubs

Providing well grown trees with minimum average girth of 10 cm and minimum height of 5 M above finished level after plantation of specified variety , at desired location & at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, levelling the top soil surface as specified after plantation, staking to balance the tree. Including transport to the site & planting , preparation of tree basin, watering & maintaining for 1 month after completion of plantation and replacement of casualties till 1 month.

Providing and laying Precast Seating 1500mm X 890 mm 80mm thick slabs using M30 grade of concrete.Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection each bench consists of 2 nos L - Shaped base support in Cement colour back height 890 mm front height 450 mm and base width 690mm and 1 nos. reinforced concrete plank in red colour of size 1500mm X 425mm X 50mm and bench top & back planks are treated with special anti - corrosive, water proof coating so as to make surfaces glossy and water proof the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supply and fixing of 120Litre Heavy duty trash can with specially designed bottom for minimizing the breakage and UV protested colour from sun rays. The trash can is fitted with wheel at bottom for easy mobility. The strong lid with smooth curved upper surface for perfect fit to ensure preventing unwanted smells to escape and rain water to seep through. The rate is inclusive of transportation, laoding and unloading charges.

Supply of Compactor 1100 Litres Bin made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge.

Please Enable Macros to View BoQ information