PROVN OF COVERED SHED FOR MATERIAL HANDLING EQUIPMENT/VEHICALS AT 26 ED AF AND CERTAIN

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all as specified and as directed.

Excavating over areas n.exc 1.5m deep and getting out soft/loose soil all as specified and as directed.

Dismantling structural steel work including doors, gates ,rolling shutters etc

Dismantling of Brickwork or stone/boulder masonry, built in Cement mortar/cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust, Brushing neat cement slurry with 3.0kg of cement per sq. metre etc all as specified

M & L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L for RCC (Nominal mix), 1:2:4 type B1 (20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete concrete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffit (if any) of foundation and plinth beams, and similar work vertical or batter for rough finished surface all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete as specified.

S & F Rolled mild steel in sections Fe 410 grade E-250 as in framing for poles, cladding, glazing and the like fixed with angle cleats and connecting plates, etc

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 E-250 all as specified and as directed.

S & F Mild steel bolts diameter of neck exc 12 and n.exc 20mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long all as specified.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater eaves, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three waystraps, plate washers and similar small articles conforming toFe-290 Gde-E-165

S & F MS steel wind ties for roof including securing bolts; complete all as specified

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (flat) 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in ridges/eaves gutter, fixed with self tapping screws as specified

Erection and fixing only of Rolled mild steel in sections (ladder) Fe 410 grade E-250 as in framing for poles, cladding, glazing and the like fixed with angle cleats and connecting plates, etc

M & L for two coats of synthetic enamel paint for over a coat of primer incl preparation of new steel surfaces not otherwise described, over 10cm width or girth.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified by Engr-in-Charge

Surface excavation n.exc(not exc) 30 cm deep and averaging 15cm deep and getting out in soft loose soil

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken bricks all as specified.

M & L for 100 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) as in flooring all as specified and as directed.

M & L for 100 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring all as specified and as directed.

M&L for PCC 1:3:6 type C2, 40 mm graded aggregate As in plinth protection (75 mm thick) finished even and smooth with using extra cement. Note: Joints of the plinth protection should be filled with sand and bitumen mortar and sealed with bitumen grading

M & L for pre cast cement concrete block masonry with solid block exc 10 cm thk in width (with plain or interlocking joints as directed) complete, in walls and set in cement mortar 1:6 of PCC 1:3:6 (Type C1) all as specified and as directed.

M & L Rendering in CM 1:6 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified.

Material & Labour for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in surface channels/benching of manhole, drain, laid to shape and slope and surfaces complete etc all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. in main holes using extra cement.

M & L for two coats of cement based paint on newly plastered cement painted walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing suitable size mild steel terminal boxes concealed in wall with 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed (a) One light point controlled by one switch.

All as per item no 32 above,but, One 5A 2pin/3pin switch socket out let multipurpose on independent Board.

All as per item no 32 above,but, wiring complete with 2.5 Sqmm for 5 pin 5/15A socket on independent board with 2.5 sqmm copper conductor for earth continuity

Supply and fix Switch piano flush type single pole one way 5 Amps, 230 V complete all as specified

Supply and fix ceiling rose surface PVC / polycarbonate isolated body with three terminals all as specified and as directed.

Supply and fixing Switch socket combination 5 pin, 5 Amps, flush type universal complete all as specified

Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. ®Supply & fix LED tube light along with fixture, 20 W Ac 230 volts 50 Hz complete as specified

Material and Labour for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including PVC rigid conuit of 20 mm dia alongwith accessories on surface of wall , roofs etc., all as specified and as directed. Note : 2 runs of PVC FRLS cable, one run of earth continuity conductor cable and one run of PVC conduit shall be measured as one length/running metre.

Supply and fixing LT UG cable of size 16 Sqmm , 4 core XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100 volts ,with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed.Note: (i) Earth work excavation , sand cushioning, bricks for protection, GI pipe etc shall be measured and paid for separately under relevant items of this schedule..

Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete all as specified and directed.

Material and labour for Sand cushioning to cables with a layer of sand before and after laying the cable complete all as specified and as directed. Note :- Sand shall be measured after punned down.

Material and labour for Brick protection cover on cable with sub class 'B' bricks, across in trenches laid dry and flat adjacent to each other complete all as specified and as directed

Material and labour for Cutting pcc /road existing hard standing/flooring not exceeding 150mm width x 300mm depth for LT ug cable / GI pipes and making good the distrubed surfaces with cement concrate 1:2:4 type B1 using 20 mm graded stone aggregate compelte all as specified and as directed.

Material and labour for G.I. tubing light grade of size 50mm bore for protection of cables to be laid under roads, crossings/culverts including taking down/up old unserviceable GI tubing complete all as specified and as directed.

Supply and Fixing in repairs MCB DB SPN 4 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar

Supply and Fixing in repairs MCB SPN 32 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC Complete all as specified and as directed.

Supply and Fixing in repairs MCB SP 5 to 32 Amps rating, 10 KA Ç 'curve 240V, 50 Hz AC Complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below groundlevel) with top edge of the plate notless'than 1.5 metres below normalground level, connected togalvanised earth lead 4 mm GI Wire by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion complete all as specified.

S&F Modular Switch 1 way 6 Amps 1 Module complete all as specified.

S&F Modular Socket,6 Amps- 2/3 pin combined 2 Module complete all as specified.

Supply and fix White cover plate with frame 3 modular complete all as specified.

Supply and concealed metal flush box 3 module where feasable on wall complete all as specified.

M&L for Sub main wiring with Two runs of single core pvc insulated cable FRLS with copper conductor multistranded 1100 volts grade 1.5 sqmm through and including with suitable size of PVC conduit and its accessories , on surface including one run of 1.5 sqmm pvc insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified.

Supply & fix Air Circulator fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified.

Supply and fix MCCB Encloser suitable for 4 pole MCCB complete all as specified.

Supply and fix MCCB 32 Amp , 4 pole repturing capacity 10 Ka complete all as specified.

M & L for GI tubing light grade 40mm for cable protection for laid in trenches in road crossing all as specified and as directed

G K CONSTRUCTIONS

Shanthi Construction

VSHVAS CIVIL AND ELECTRICAL SERVICES PRIVATE LIMITED

Siddivinayaka Constructions

G K CONSTRUCTIONS