Extension Renovation and Modernization of Sonapur Damarapathar ELIS under TSP for the year 2024_25 Dispur Division Irrigation Kamrup circle

Amount

Fabrication of Barge along with two nos of Pump Set & Other Mechanical Works

Supply & Fabrication of steel floating brage including anchoring of Size 4.57 mm x 3.81 mm x 1.37 mm for LIS. Heavy duty Steel Wire Rope , steel core, tested Quality, galvanized ,6/19 construction as per IS:2266-2002 , 19mm dia U-Bolt For, 19 mm dia wire rope C.I. Ballard Fitting fixing anchoring system including carriage and handling @ 5% on 2,3 & 4 i.e.,on Rs. 52,049.79

Fabrication and Installation of M.S. Foot Bridge

Centrifugal pump set with 60/70 LPS minimum discharge at 10.35 Mtrs Head, working efficienctly at head range (7.62-13.71) Mtrs coupled with 20 HP induction motor. Pump, Motor, Starter should be of reputed brand and as per IS specification. Motor: Cnformation to IS : 325 - 1978 1. Make :MARATHON/LUBI/Kirloskar/ Crompton/Havells. 2.Type/Model: Squirrel cage TEFC, 3. hp: 20 HP 4. RPM: 1450 5.Supply voltage/phase/cycle : 415 V ±10% 3 Ph/ 50 Hz PUMP:- Conforming IS: 6595 Part-I 1.Make : Lubi/Kirlosker 2. Type: Horizontal Axially Split casing 3. Model: LHC 125-250/ UP-125/30 A 4. Size(Suction X Delivery): 150 mm x 125 mm. 5. Head Range : 7.62-13.71 M. 6. Pump Input : 10.81 KM. 7. Efficiency at duty point: 78% STARTER SUITABLE TO RUN ABOVE PUMP SET: 1.Make: BCH/Havells/Equivalent . 2. Model: NASALLEM. 3. Type: FASD. 4. Relay Range: 13-21 A Also includes best quality MS frame and coupling of required size and shape.

Fabricated heavy duty G.I. Bend confirming to IS– 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:- 150 mm dia x 90°

Fabricated heavy duty G.I. Pipe confirming to IS 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:- 150 mm dia x 0.30 Mtr. Long

Fabricated heavy duty G.I. Pipe confirming to IS 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:- 150 mm dia x 1.2 Mtr. Long

Heavy Duty CI Foot Valve, Flange type, the holes of the flange should be drilled as per BSS No. 10, Part-1, Table-D. The materials of construction and all components of the Foot Valve should be strictly conform to IS : 10805-1986 and having marked with manufacture name and trade mark of 150 mm dia.

CIDF Sluice Valve of 125 mm dia, Make : Kirloskar/ Upadyaya/Zolato/Venus & Eqv.

CIDF Reflex Valve of 125 mm dia, Make : Kirloskar/ Upadyaya/Zolato/Venus & Eqv.

Fabricated M.S.D.F. Pipe, 5mm thich with 19mm dia 12 nos. hole in the flange of thickness 10mm, for different size :- 125mm dia x 0.30 Mtr. long

Fabricated M.S.D.F. Pipe, 5mm thich with 19mm dia 12 nos. hole in the flange of thickness 10mm, for different size :- 125mm dia x 0.60 Mtr. long

Fabricated M.S.D.F. Pipe, 5mm thich with 19mm dia 12 nos. hole in the flange of thickness 10mm, for different size :- 125mm dia x 1.20 Mtr. long

Fabricated heavy duty G.I. Bend confirming to IS– 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:- 125mm dia x 90º

Flexible Rubber Hose Pipe with MS built in type flange 125mm nominal dia x 7.5 Mtr in Length

Fabricated M.S.D.F pipe, 5 mm thick with 19 mm dia 12 nos. hole in the flange of thickness 10 mm for different size:-125 mm dia x3.00 Mr long.

Copper Conductor Armoured cable of 16 Sq mm x 3 core

Installation of Centrifugal Pump set (Horizontal Split casing type, size: 150 mm(suction) x 125 mm dia. (delivery) of 60 LPS minimum discharge at 13.00 Mt head coupled with 3 ph, 415 V, 50 Hz, 1450 RPM squirrel cage induction motor of 20 HP complete set. The job includes necessary transportation of pump set to the site and installation on barge /pontoon in proper position with accurate aligment by means of foundation nuts and bolts etc including testing & commissioning at site at full load condition complete with all works. complete with all works.

Fitting, fixing and laying of G.I. Pipes with Accessories: Laying, fitting, fixing and connection of suction pipe line for each pump set with 150mm dia. G.I. pipes of different length, fabricated G.I. pipes with different length, fabricated bends, tapper including foot valve for suction side. Reflex valve, sluice valve for delivery side of each pump set with 125mm dia. G.I. pipes with different length, bends, fabricated G.I. pipes with different length as per drawing. The joints should be with the best quality pipe joining sets of required size comprises of 60mm thick black moulded rubber gasket, necessary nuts, bolts and washer. Every joint should be leak proof and should be completed in all respect from foot valve to the pump flange for suction side and from delivery flange is the water flow through at proper F.S.L for the delivery side. The pipes lines with accessories must be proper painting.

Providing, fitting , fixing and erection of pipe supports for each pipeline at on interval of 3.00 Mtr. (approx) made of M.S. channel (ISMC 75) 1.50 Mtr. height with angle bracing erected on CC block of size 0.45mX0.30mX0.60m below ground.

Starter Stand: Supply & Installation of MS Starter Stand made of MS Angle of size 50mmx50mmx5mm including of providence C.C Block Foundation for installation of starter stand along with the required cement concrete works etc. The work includes painting of the starter stand with 1(one) coat of red oxide metal primer to be followed by 2(Two) coats of anticorrosive smoke grey paint to be applied after air drying of each previous coat.

Laying and connection of cables such as Feeder cable, priming motor cable, lighting cable etc. 16sqmm x 3 Core

Crompton Make DMB 10ACSL 1 H.P(0.75 KW) Electric Driven Centrifugal Mono-Block Pump Set (Suction-25 mm dia. & Suction-25 mm dia.)

D.O.L. Starter, 1.5 H.P/1.1 kw Over load Relay Range 8.9-13.5

Single pole M.C.B. 16A ICS

Installation, fitting, fixing of 1.0 HP mono block pump set (excluding cost of pump set), pipes and accessories for priming system at each point of a ELIS. The job consists of supply and fitting of items like Flexible PVC pipe, GI pipe, GI Tee, GI Elbow, GI Nipple, GI Socket Bronze valve, Foot valve, PVC insulated copper conductor etc and labour charges.

Electrical Works

Outdoor Power Distribution System TPN Main Switch (SDFU - Switch Disconnector Fuse Unit) Wall Mounting Type Supplying including fitting, fixing & connection of TPN Main Switch (SDF) with HRC Fuses, 415 V AC, in Sheet-Steel Housing of following current ratings to be fitted in existing Angle Iron Frame/Wall with Clamps, Nuts & Bolts and all other necessary materials as directed including drilling of holes as required 160 A

LAYING OF LT/HT POWER CABLES Supply and Laying in Air/ Open Trench Supply and Laying of Single Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with Brass Compression Gland and Cable Lug as required and as directed Size of Cable : Size of Cable : 50 Sq mm × 1 core(4 line)

70 mm2 × 3.5 Core: Supply and Laying of PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor of size 50 mm2 × 3.5 Core in Single line ,Conforming IS 7098(Part I) 1988, direct in ground including digging of trench of 0.3 Mtr wide × 0.75 Metre deep including Sand Cushioning (7.5 cm + 7.5 cm) and refilling alongwith fitting, fixing of Brass Compression Gland and Aluminium Cable Lug etc. as directed

PIPE EARTH STATION Supplying & Erection of Pipe Earth Station including supply of all materials with G I Pipe of following size perforated all over the body with 12 mm dia hole at standard spacing with necessary reducing socket, locking arrangement with hinge cover plate, funnel G I Nuts & Bolts etc. with necessary enclosure on the top including excavation and refilling as required and as directed. Earth Station with 40 mm dia × 2.5 Metre long G.I Pipe

G I EARTH WIRE Supply & Erection of G.I. Earth Wire and Earthing of different Substation Items by connecting the existing Earth Pipes with G. I. Lugs as directed with 6 SWG G I Wire

STARTER CABLE & PF CORRECTION Supply and Laying of 3(Three) Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with Brass Compression Gland and Cable Lug as required and as directed. Size of Cable : 35 mm2 × 3 Core ( Single Line)

LT CAPACITOR BANK Supplying fitting fixing of LT Power Capacitor 415 Volt AC 3 φ (Single Unit) of following KVAR Rating and making connection with Busbar in the existing Panel. The Capacitor is to be placed in existing Platform. 6 kVAR

IRON ANGLE STAND FOR CAPACITOR BANK Supplying fabrication and erection of Iron Angle Stand for erection of LT Power Capacitor made of M S Angle of size 30 mm x 30 mm x 5 mm with 4 Nos. legs 400 mm high and cross pieces having Bakelite Sheet Horizontal Platform as directed Size of the Frame : (1200 mm × 300 mm) × 400 mm

EXTERNAL ILLUMINATION Supplying including fitting, fixing & connection of TPN Main Switch (SDF) with HRC Fuses, 415 V AC, in Sheet-Steel Housing of following current ratings to be fitted in existing Angle Iron Frame/Wall with Clamps, Nuts & Bolts and all other necessary materials as directed including drilling of holes as required 63 A

Supplying & Erection of Swaged Type Steel Tubular Pole of following lengths and specifications for overhead Electric Lines with necessary Base Plate and Top Cap including digging of Earth Pit to a depth ⅕th of the Pole Length, refilling and necessary CC work (45cm x 45 cm) in 1:3:6 proportion from bottom upto 45 cm above the Ground Level with hard ramming including painting of the pole as directed Steel Tubular Pole 410 SP-9, 7.5 m long (IS 2713-Part III 1980)

Supply and Laying of PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support as required and as directed Size of Cable : 10 Sq mm x 2 core

PVC Flexible conduit (ISI approved make and quality) 25 mm

PVC Conduit pipe (Berelia or Equivalent) thickness 1.5 mm, 25 mm

PVC Elbow 25 mm

PVC Bend 25 mm

PVC Junctin Box 25 mm, 4W

PVC Tee, 25 mm

PVC Board (Best quality) 100 mm x 150 mm

Flush Type Switch (ISI approved) 5 Amp

Flush Type Socket 3 pin, 5 Amp

Flush Type Switch Socket 3 pin, 15 Amp (5 pin)

Pendent holder

Ceiling Rose

Solvent Cement 100 ml bottle

Incandescent Bulb (BAJAJ/PHILIPS) 60 W

Single core copper conductor (Flxible) Industrial cables FR-LSH compound insulated 1100 volts conforming to IS:694 Havells/Crystal 1.5 Sqmm

Mseal for general purpose

MS Screw (Assorted size)

PVC Tape (25 mtr roll)

Black/Red Electrical resistant rubber sheet one side chequrred & other side with cloth finish tested upto 15 KVAR as per ISS of ISI approved 1.81 mtr (L) x 0.9 tr(B)x10 mm (T)

Danger Plate suitable for 11 KV line conforming to IS 2552/1963 of size 250 mm x 200 mm

Estimate for Renovation of Main Canal from Ch. 210.00 m - 640.00

CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).

12 mm cement plastering including clearing surface and curing, complete as directed. (i) In proportion 1:3

Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed.

Estimate for Renovation of Branch Canal-1 from Ch. 0.00 m - 360.00

CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).

12 mm cement plastering including clearing surface and curing, complete as directed. (i) In proportion 1:3

Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed.

Estimate for Renovation of Branch Canal-2 from Ch. 0.00 m - 321.00

CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).

12 mm cement plastering including clearing surface and curing, complete as directed. (i) In proportion 1:3

Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed.

Estimate for Renovation of two nos of Water Trough

CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will paid separetly)

12 mm cement plastering including clearing surface and curing, complete as directed. (i) In proportion 1:3

MUNIN DAS JV BHAGABAN THAKURIYA (BID ID -259085)

M/S. M.P. AGARWALLA (BID ID -259027)

MD NUR MAHAMMAD ALI (BID ID -259638)

BALAJI CONSTRUCTIONS (BID ID -259634)