Krishnagiri District Veppanapalli Block AGAMT II 2025-2026 1. Construction of Anganwadi Buidling at Manavaranapalli H/o. Manavaranapalli. 2. Providing Approach road to Burial Ground at Manavaranapalli H/o. Manavaranapalli. Pkg No 2025-2026 VNPI 05

Amount

1. Construction of New Anganwadi Building at Manavaranapalli H/o. Manavaranapalli - Rs. 17.25 Lakhs.

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc. complete.

Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed

Cement concrete 1:2:4 mix using 20mm metal including cost and Conveyance of all site etc. Complete.

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle

Column

Lintel, Roof slab, Beams etc.,

SunShade

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Supplying and Applying of two coats of putty of 3mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (Waterproof abrasive sheet) to give a smooth and even the entire surface. Any unvenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty fter 6 hours of 1st coat of putty and then sand papering (Waterproof abrasive sheet) the same after it is dry and fininshing the surface smoothly, etc.. Complete complying with standard specifications and as directed by the departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (Waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc., Complete]. The Putty should be got approved by the Executive Engineer before use on work.

Special Ceiling palstering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, (One cement and Three M.sand) 10mm thick includinghacking the surfaces, providing cement Mortar mosing, beading for sunshades, staircases, stepslanding slabs and curing etc., in all floors complying with standard specifications and as directed by the departmental officers.

Plastering with CM 1:4, 20mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth

Paving the floor with best quality verified tiles of Size 600 x 600 x 8mm of approved colour, shade quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISS HBG metal and the top rubed smooth etc., complete complying with standard specification as directed. i. 25mm thick for Resid

Distembering two coats using best approved Interiar oil distember with one coat primer over New plastered Surface including cost and conveyance of materials and labour charges etc complete

Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.Schedule ItemNo.359 – B)

Painting two coats with approved Black Oxide for Black board

Supplying and cost of steel doors ventilators, window bars etc.,

Door D (1.10x 2.40m)

Door D1 (0.75 x 1.50m)

Door D2 (0.90 x 2.40m)

Windows (1.20 x 1.60m)

Ventilator (0.90x0.45m)

Jolly (0.60x0.45m)

Fixing charges of steel doors,

Fixing charges for Windows and ventilators

Supply and fixing of Cuddappa Slab including cost and Conveyance of all site etc. Complete.

Provision for Electrification arrangements

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in sutiable heavy gauge MS Conduct pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5A FT switch with 3mm thick hylem sheet cover MS switch box with continuous earth wireconnection of 14 SWG TC wire and making good of the concealed portion for concealed light point / fan point (for electronic regulator) SD24. Light point/ fan point

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in sutiable heavy gauge MS Conduct pipe on wall and ceiling with MS accessories with flush with wall with 150mm x 100mm x 75mm MS switch box with 3mm thick hykum sheet cover for 5A 3pin non interlocking CS plug with contionuous earth wire connection of 14 SWG TC wire and making good of the concealed portion for sutiable colour for concealed plug point SD12. Plug point

Supply and run of 4x6 sqmm (84/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains . Service wire

Supply and run of 4 X 6sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. Service pipe

Supply and fixing of 1200 mm (48'') AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamo. SD 110. Ceiling fan

Supply and fixing of CFL bulb SD 80. CFL Bulb.

Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 83. Bulk Head

Supply and fixing of single box type 4'40 W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting Tube Light SD 88. Tube Light

Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 125. EB Meter board

Supply and fixing of DPI main switch SD 142. DPL Main switch

Provisions for EB service connection deposit charges (3 PHASE)

Provisions for Water Supply and Sanitary Arrangements

110mm PVC Pipe

110mm PVC Bend

110mm PVC Tee

110mm PVC Pipe cowl pipe

110mm PVC Pipe vent cowl

PVC Nahini / Floor Trap with PVC Grating 100mm x 75mm

1000 Ltr Tank

32mm PVC Pipe

32mm PVC Bend

25mm PVC Pipe

25mm PVC Elbow

25mm PVC Tee

25mm x20mm PVC Reducer

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)

Provisions for RWHS including pipes & specials etc., all complete

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Collection and supply of sand filling into the basement including cost and conveyance to the site and all labour charges.

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Collection and supply of filling the stones in soakpit including cost and conveyance of materials to the work site and all labour charges.

40mm metal

20mm metal

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Provisions for supply and fixing of precast RCC cover slab including cost and conveyance of materials and all labour charges

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm

Europeon Water Closet with all fittings and 10lit capacity flusing tank

Provision of Baby IWC

provision for writing animation drawings, alphabets etc., all complete

Provision towards Citizen Information Board

Provision for Photographic charges

2. Providing approach road to Burial ground at Manavaranapalli H/o. Manavaranapalli (183 m x 3.25 m). Rs.9.54248 Lakhs

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation inmcluding watering wherever necessary and laid in layers of not more than 15cm thick.,

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc

Plain Cement Concrete 1:3:6 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Construction of un-reinforced , dowel jointed at expansion and construcction joint only, PCC pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade)

Provision For Bitumen Pad Charges

Provision For Writing name board Charges

Provision For Photographic Charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

DEEPA CONTRACTOR (BID ID -1291179)