Tender for Fabrication and erection Job work

Amount

M.S Pipe Line, Dismantling of pipe lines 1” to 3’’

M.S Pipe Line, Erection of pipe line from 1” to 3” dia

Fabrication of pipe line from 12”above

Flanges and blind up to 48”, dismantling of flanges/blind

refitting of old/new flanges/blind

fabrication of flanges blind from M.S. plate up to 48”

Dismantling of Bends, reducers and nipples (up to 1’’ to 12’’),

Fabrication of Bends, reducers and nipples (up to 1’’ to 12’’),

Fitting of Bends, reducers and nipples (up to 1’’ to 12’’),

Dismantling of Reducers and nipples (above 12’’)

Fabrication of Reducers and nipples (above 12’’)

Fitting of Reducers and nipples (above 12’’)

Dismantling of M.S. / G.l pipe Accessories (Tee, cross ,distance piece up to 12’’)

Fabrication of M.S. / G.l pipe Accessories (Tee, cross ,distance piece up to 12’’)

Erection of M.S. / G.l pipe Accessories (Tee, cross ,distance piece up to 12’’

Dismantling of M.S. / G.l pipe Accessories (Tee, cross, distance piece above 12’’)

Fabrication of M.S. / G.l pipe Accessories (Tee, cross, distance piece above 12’’)

Erection of of M.S. / G.l pipe Accessories (Tee, cross, distance piece above 12’’)

Dismantling of M.S.tanks,/Vessels from M.S plates, angle M.S channel ‘I’ section etc ( up to 6 mm plate )

Fabrication of M.S.tanks,/Vessels from M.S plates, angle M.S channel ‘I’ section etc( up to 6 mm plate )

Erection of M.S.tanks,/Vessels from M.S plates, angle M.S channel ‘I’ section etc ( up to 6 mm plate )

Dismantling of M.S. plate jobs on boiler ducting boiler casing etc.( above 6 mm plate)

Fabrication of M.S. plate jobs on boiler ducting boiler casing etc.(above 6 mm plate)

Erection of M.S. plate jobs on boiler ducting boiler casing etc.(above 6 mm plate)

Dismantling of railing

Fabrication of railing

Erection of railing

Dismantling of Valves 1’’ to 6’’

Dismantling of valves 7’’ to 12’’

Dismantling of valves above 12’’ size

Fitting of valves 1’’ to6’’

Fitting of valves 7’’ to 12’’

Fitting of valves above 12’’ size

Dismantling of S.S Pipe Line all sizes

Erection of S.S Pipe Line all sizes

Dismantling of S.S.pipe Accessories(tee,cross, distance piece, nipples reducer and bend) up to 12

Fabrication of S.S.pipe Accessories(tee,cross, distance piece, nipples reducer and bend) up to 12

Erection of S.S.pipe Accessories (tee,cross, distance piece, nipples reducer and bend) up to 12

Patch Work on tank and pipe (M S plate cutting, fitting and welding, 02 round welding)

Dismantling of cone, bigger size will be treated

Fabrication of cone, bigger size will be treated

Erection of cone, bigger size will be treated

Dismantling, Fabrication and Erection of gutter of any size by Required thickness.

Dismantling , fabrication and erection of hood of cutter ,chopper and leveler by 8/6 mm M.S. Plate

Dismantling , fabrication and erection of M.S Boiler Chimney Base Dia= 3.5 M, Top Dia= 2.5m, Height=30-32m

Dismantling of old and erection of new I D Fan taper cone.

Dismantling , Fabrication and erection of old ducting from I.D. fan inlet damper to I D Fan .

Dismantling , Fabrication and erection of flue gas ducting size 5’ x 5’ before ID fans

Dismantling, fabrication and erection of I.D.. fan casing from 8 to 10mm M.S plate .Size 5’x5’

Dismantling, fabrication and erection of I.D. Fan inlet damper

Dismantling ,fabrication and Erection of Bagasse elevator, bagasse carrier and RBC bottom and side plate worn out portion

Dismantling , fabrication and erection of Boiler bagasse feeding Chute by 8/6 mm M.S. plate.

Dismantling, erection and fabrication of umbrella of Pan.

Dismantling, fabrication and erection of save all of Quad body.

Dismantling, Fabrication and Erection of save all of Pan.

Stair case( Dismantling, Fabrication & Erection with chequered plate/old plate and pipe line)

Dismantling and erection of pump up to 4’’ suction and up to 15 HP motor.

Dismantling and erection of pump more than 4” suction and 16 H.P motor or more

Dismantling of Ammonia and gas coils

Fabrication of Ammonia and gas coils

Erection of Ammonia and gas coils

Dismantling of new plate form as per requirement from old M S plate 6mm to 8 mm thickness, up to 2 sqm.

Fabrication of new plate form as per requirement from old M S plate 6mm to 8 mm thickness, up to 2 sqm.

Erection of new plate form as per requirement from old M S plate 6mm to 8 mm thickness, up to 2 sqm.

Dismantling of new Plate form by M S/ chequered plate more than 2 sq.mtr

Fabrication of new Plate form by MSchequered plate more than 2 sq.mtr

Erection of new Plate form by M S/chequered plate more than 2 sq.mtr

Dismantling of Crystallizer Coils

Fabrication of Crystallizer Coils

Erection of Crystallizer Coils

Dismantling of Old and worn out staging

Fabrication of Old and worn out staging

Erection of Old and worn out staging

Repairing of rubber seat of exhaust /vapor valve above 16 “

Dismantling , fabrication and erection of mill juice tray by 8 mm/10 mm M.S plate

Dismantling of existing cane carrier chute and fabrication and erection from 8 to 10 mm M.S plate

Repairing of steam jacket for sulphur furnace

Replacement of steam jacket of evaporator bodies

Strengthening of vapour line above 16” dia by inner and outer side ring of angle/pipes

Dismantling , fabrication and erection of support of angle, pipe, channel at any equipment

Dismantling of Hopper centre piece by 12 mm plate

Fabrication of Hopper centre piece by 12 mm plate

Erection of Hopper centre piece by 12 mm plate

Dismantling of Hopper tray

Fabrication of Hopper tray

Erection of Hopper tray

Sulphur Furnace cooler Dismantling, Fab. and Erection work

Sulphur Furnace scrubber Dismantling , Fabrication and Erection work

‘B’ Vacuum crystallizer shell to be changed from10 MM M.S. plate

‘C, Vacuum crystallizer shell to be changed from 10 MM M.S. plate

Strengthening of factory columns of various size by 10 mm M.S. Plate, angle, channels etc

Strengthening of factory beams of any size by M.S. plate, angle, channel, I. Section etc

Chipping, cleaning and painting of machinery columns and beams or staging of factory machinery.

Painting one coat with ready mixed paint in factory building M.S. columns (25 mtr approx. height. and 15-5 mtr height approx) and M.S trusses including rubbing down old (if required at site. All the bracing and purlins are included with this work.

Dismantling, Fabrication and erection of any sizefactory/Building, columns beams and trusses

Dismantling ,Fabrication and erection of worn out Water pipes, nozzles, drain box etc.

Dismantling, Fabrication and erection of worn out shell of both wet Scrubber

Dismantling, Fabrication and erection of worn out internal of both wet Scrubber

Dismantling, Fabrication and Erection of worn out flue gas ducting size 5’ x5’of both Wet Scrubber from damper to chimney

Replacement of worn out portion of supports of molasses tank roof.

Replacement of worn out portion of roof of molasses tank.

Dismantling of Boiler exit flue gas damper.

Dismantling, and erection of Boiler I.D., F.D. Fan impeller.

Replacement of weak portion of molasses tank up to a height of 10 mtr by 6 mm, 8 mm,10 mm, 12 mm plate etc.

Dismantling and assembling of Air heater outlet ducting.

Replacement of worn out Air Heater tubes.

Dismantling, Fabrication, Erection of worn out both boilers blow down line from boiler to drain pit.

Dismantling, Fabrication, Erection of worn out of 5” long bend of feed water line header.

Removal of hanging old lagging and fixing of new glass wool, plastered by P.O.P or hasean cloth and covered with wire netting (murga jali) without material Up to 75 mm thickness

Replacement of juice heater partition plate in all respects.

Pan No.1 top cone replacement work.

Reconditioning of worn out Juice heaters 02 Nos. covers & grooves with respect to its top/bottom mating outside covers

Dismantling of 6" dia C.I. cross.

Erection of 6" dia C.I. cross.

Dismantling , fabrication, erection of 10' x 20 ' vacuum filter mud tray.

Dismantling of worn out body shell of Pan.

Fabrication and erection of body shell Pan.

Dismantling , Fabrication, Erection of 8' x 16 ' vacuum filter mud tray.

Juice heater both covers to be dismantle and erection after machining work at both shafts.

Dismantling of worn out bottom and Fabrication and Erection of new bottom of H-Crystallizers.

Dismantling, Fabrication and Erection of M.S bend 12” to 20”.

Dismantling, Fabrication and Erection of M.S bend 21” to 40”.

Dismantling of new evaporator (quad) body S.S. tubes

Re-tubing of new evaporator (quad) body

Dismantling of VC-1100 m3 S.S. tubes

Re-tubing of VC-1100 m3 S.S. tubes

Increasing the length of hydraulic grab fingers

Dismantling , fabrication, erection of kicker drum with holder assembly

Dismantling, Erection Commission of Pan discharge valve of Pan.

Modification of mill Kush Kush Conveyor

Fabrication, Erection of new juice Dorr filtration system.

Dismantling, Fabrication, Erection of flocculating chamber top and bottom plate of Dorr.

Crystallizer spiral ribbon strip has to dismantle and again set right fitting and worn out arms and other related work also to be done.

Dismantling , Fabrication, Erection of worn out runner of cane carrier/bagasse elevator/ RBC/MBC Cane Rake Elevator.

Dismantling, Fabrication and Erection of Agitator of vacuum filter.

Dismantling, Fabrication, Erection of worn out portion of D.S.M. screen

Fabrication, erection of I.D fan cone ring with flange

Erection and commissioning of B- messecuite C/F machine including machine structure, leveling of machine and related work to be done in all respect of M/C

Dismantling of old worn out and Fabrication, Erection of new juice sulphitor internal drum

Juice ring Fabrication by 6mm plate for mill rollers

Hinge type cover Fabrication at copper, leveler and cutter

Boilers No.2 6” live steam line from Boiler No.2 to main steam distributer to be modified

Boiler feed tank replacement

All Bagasse chute of both boilers to be modified

Rack and pinion to be fitted in MBC at Bagasse loading chute.

Labour supply ( per day 8 hr. basis)Turner/Machinist

Labour supply ( per day 8 hr. basis) Fitter

Labour supply ( per day 8 hr. basis)Welder

Labour supply ( per day 8 hr. basis)Helper

Labour supply ( per day 8 hr. basis) Khallasi

Dismantling, Fab. & Erection of tail end shaft, idler shaft and driving shaft with plumber blocks & driving unit etc for B.E, RBC & MBC.

Dismantling, Fab. & Erection of cane carrier & Cane Rake Elevator shaft.