Major Repairs at Boys Middle School Noorbagh

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 meters (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per meter cost of total length of barbed wire used. With G.I. barbed wire

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) INCLDUING SHUTTERING COMPLETE JOB INCLUDING EMBEDDING OF ANGLE IN WORKWORK WITH DIASMENTALLING OF BRICK

Centering and shuttering including strutting, propping etc. and removal of form work for: 5.9.16 Edges of slabs and breaks in floors and walls Under 20 cm wide

POINTING ON STONE WORK Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Raised and cut pointing

FILLING OF GOOD EARTH INCLDUING BREAKING OF CLODS AND LEVELING WITH MANUAL MEAN INCLUSDING ALL CARRIAGE UPTO SITE

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:11.33.5 Black zebra Udaipur green marble

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.w indow including all fixture invloved liks hings t bolt etc compltete imported kd wood (30mm )door INCLDUING PAINTING

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : including all fixture invloved liks hings t bolt etc compltete of imported kd wood 30 MM INCLUDING PAINTING

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

float glass 3.5mm thick ofapproved barnd and manufacture WITH NECESSARY BEEDING AND NAIL COMLETE JOB

12 MM CEMENT PLASTER 1:6

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per s

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

hard ware fitting of brass handle 4'

handle 6"

l drop with lock type OF APPROVED BRAND AND MANUFACTURE

t bolt 4"

t bolt 6"

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 16mm including all fixture lite t union elbow etc16MM

bib cock

Pvc pipe 100 MM DAI(type b)

Pvc pipe of 75 mm dia(type b)

plian bend 100 mm