8538 REPAIR AND MAINT MANGLORE TILES AND GALVALUME SHEETS, EVES BOARD, FALSE CEILING INCLUDING JOINERY IN MD AND OTM ACCN AND SOUTH CAMPUS AT AFMC AREA UNDER GE (CENTRAL) PUNE

Amount

M & L for Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry in roofing etc complete at any height including dismantling single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed.

All as per item No 01 above but Fixing only all as directed. (Note : Old erviceable items obtained from dismantling shall be reused)

S & F ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 complete at any height including dismantling single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar etc complete all as specified and directed.

All as per item No 03 above but Fixing only all as directed. (Note : Old erviceable items obtained from dismantling shall be reused)

M & L for 2nd class hard wood battens, clean sawn at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm, fixed with nails complete at any height including dismantling battens for tiles, shingles etc of any size including tilting fillets, spacing exc.15cm complete all as specified and directed..

Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M & L for second class hard wood boarding 20mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation and height all as directed dismantling Boarding of any description fixed in any position with nails, with or without cover fillets etc complete all as specified and directed.

All as per item No 07 above but Fixing only all as directed. (Note :- Old boarding obtained from dismantling shall be reused.)

S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts in roofs, walls etc. with grade of zinc coating 275 complete at any height including dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings , any description and in any position complete all as directed.

S & F 0.63 mm thick galvanised plain mild steel sheeting in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed) with grade of zink coating 275 complete including at any height dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings , any description and in any position complete all as directed.

M & L for second class hard wood scantiling clean swan fixed in any position of timber unframed work complete including dismantling timber scantlings 40 Sqcm and over in cross section in any position of framed work complete all as specified and directed.

All as per item No 11 above but except timber complete all as directed.(Note :- Old scantling obtained from dismantling shall be reused.)

M & L for second class hardwood,Plain fillets exc 13 Sqcm n exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or bands as in fillets, rails, posts, rafters, purlins etc complete including dismantling fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as directed.

M & L for Preparing new surfaces of Tiles or slate battens, any size and spacing and treating all over with two coats of creosote oil complete all as specified and as directed.

M & L for Straight cutting and waste to square abutments, chimney stacks, verges etc all as directed.

M & L for Raking cutting and waste to hips, valleys etc all as directed.

M & L for filleting in any position & to any shape, sectional area exc. 25 Sqcm but not exc. 50 Sqcm in CM 1:4 including all mitres , stops etc complete all as specified.

M and L for preparation of new wooden surfacees of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M and L for preparation of old wooden surfacees of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as directed.

M & L for 6mm thick asbestos cement one piece plain angular ridge 6mm thick complete all as specified including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as directed.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including at any height dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings , any description and in any position complete all as directed.

S & F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings , any description and in any position complete all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and as directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors , fixed with angle cleats or other connecting plates conforming to Fe-410-W ,Grade E-250 quality-A complete all as specified and as directed.

S & F Welded steel wire fabric fixed to wood or steel members weight per square metre not exc 4 Kg complete all as specified and as directed.

S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

S & F wind ties for roof including securing bolts and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed

M & L for preparation of new steel surfaces exceeding 10cm width or girth any applying two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer complete all as specified and as directed.

M&L for 10mm thick plaster on Roof kerb, Chajjas, Soffits etc in cement mortor 1:3 complete including taking down old plaster all as specified

Supply only Liquid Water proofing compound.

M & L for PCC 1:2:4 type B0 using 12.5 mm graded agg as in PCC padding in roof , roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface finished even and smooth without using extra cement includng by using liquid Water proofing chemicals @ 200 ml per bag of cement all as specified and directed by the Engr-in-charge. (Note : Liquid WPC shall be measured and paid separately)

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Ultrablock Block 2K Suin 2 coats having 200 % elongation as per ASTM 2370 , resisting 5 bars hyrostatic pressure as per DIN 1048, crack bridging min. 2mm as per EN 1062 -7 :2004.Applying SC Ultra block 2k in two coats in SSD condiition at a coverage of 1.5 kg per sqm , Mixing of powder to Liquid in the ratio of 60:40 parts by weight complete including complete removal existing treatment of any description as per manufacturers specifications.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm & removing from site.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm removing from site

Taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each.

S&F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete.

S&F 2nd class 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S & F 2nd Class H.W. Skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos)as spd in SSR Pt-I Sec 8 Cl. 8.20.(a).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 100 mm long stainless steel but hinges medium weight colld rolld.

S&F 150 mm long stainless steel barrel tower bolt of extruded section.

Supply and fix 150mm long Extruded stainless steel handles, 150mm long fabricated type., anodised

S&F 300 mm long stainless steel sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply & fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones S&F 3 mm thick plain/frosted sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane.

S&F, Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S &F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and Supply and Fix true horizonal level 595x595x8mm false ceiling non asbestos decorative tiles manufactured by V- Board or equivalent including GI powder coated snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c. Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire.

Parhar Enterprise (BID ID -3111950)

Ms. S.K. ASSOCIATES (BID ID -3114047)

M/S AKASH ENTERPRISES (BID ID -3116082)

PRANAV ENTERPRISES (BID ID -3113184)

M/s.BAJRANG CONSTRUCTION (BID ID -3106343)

PRASHANT CONSTRUCTION (BID ID -3115783)

REKHA ELECTRICALS (BID ID -3114081)

M/s Asrani and sons (BID ID -3115970)

M/S NAVNEET S MORDE (BID ID -3112038)