Transportation, installation, commissioning and trial run including necessary fabrication jobs (including civil works) of one no. 1200mm width, PVC belt conveyor for a length of 500 mtr. along 23D X Dip in RVI seam of MIC, J.P. COLLY.

Amount

Transportation, Installation, Commissioning & Trial run including necessary fabrication jobs (including civil works) of One nos. 1200 mm width PVC Belt Conveyor for a length of 500 mtr. with complete drive head along 23D X dip in RVI Seam of MIC, Jhanjra Project Colliery.

Transportation and placement of Starter, VCB, laying cables and lock out devices for 500 metre length

Transportation and installation of drive head Complete with Drive Drum,Driven Drum, Gear Box, Motor, Couplings, Bearing Blocks, Fenching etc. to 23D X dip/13L after loading it on MUV from surface.

Transportation and installation of Discharge Unit Complete with Cleaner at 23D X Dip/13L after loading it on MUV from surface

Transportation and installation of Loop Take-up Unit Complete with fencing at 23D X dip in between 13L & 14L after loading it on MUV from surface

Transportation and installation of Tail-end Unit Complete at 23L/23D X dip after loading it on MUV from surface

Transportation and installation of 500 mtr. of belt structure, after loading it on MUV from surface (weight of 1200mm structures is 0.085 Te/mtr. )

Transporting, laying, lapping & jointing of 1020 mtr. of belting (20 mtr. belt in loop )

Civil foundation work of drive head, discharge, loop take up and platform for installation for 1200 mm belt conveyor at 23 X dip in between 13L & 14 L in RVI seam of MIC, JPC

Recess cutting in hard stone

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level :1:1.5:3 ( 1 cement : 1.5 coarse sand (zone III) derived from natural sources : 3 graded stone aggregate 20 mm nominal

Providing and laying RCC work 1:3:6 for foundation and plinth Manual Mixing

Brickwork with flyash bricks 1:6 in foundation

12 mm cement plaster of mix 1:6

Loading material(Stone aggregate and sand) into MUV and loading at UG

Loading material(Cement) into MUV and loading at UG

Loading material(Bricks) into MUV and loading at UG

Supply of materials

Supply of MS. Nut & Bolt M16X40 (taking 16 nos. in 3 mtr. and 8 nos. in one Kg)

Supply of G.I. wire 8 SWG (for signalling system) Considering 0.206 kg/mtr.,total weight = 0.206*500= 103Kg

Supply of Bobin insulator (for signalling system) Considering 2 nos. in 9 mtr., total nos. = 0.22x 500=110 Nos.

Supply of M.S. Nut & Bolt 3/8"x 3" with washer (for signalling system) Considering 8 nos. Bolts with nut and washer in one Kg (110 nos. nut & bolt required)

Total impact of GST for the purpose of CTC

N.K. ENTERPRISE

K R ENTERPRISE