Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.0 LAccepted-AOC | 1 | Accepted-AOC due to L1 and credit | |
| 2 | 2₹21.5 L+₹3.2 L (17.6%)Rejected-Finance VILLAGE POST PATHOLI AGRA UTTAR PRADESH INDIA | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹21.7 L+₹3.4 L (18.4%)Rejected-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹23.0 L+₹4.7 L (25.7%)Rejected-Finance | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹23.3 L+₹5.0 L (27.1%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | 5 | Rejected-Finance Being other than L-1 |
| Sl No | Description | Qty | Unit | M/s M S Sharma and Co. L5 | Rahul Construction Co L9 | m/s meetu enterprises L1 | GIRENDRA SINGH AND CO L6 | R.S BUILDERS L4 | m/s Agra Builder L7 | C P Singh and Co L2 | M/s Krishna Construction Company L3 | M/S RADHEY GOVIND ENTERPRISES L8 | saroj constructions L11 | J P CONTRACTORS AND SUPPLIERS L10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed. | 25 | Cum | 200 ₹5,000 | 250 ₹6,250 | 120 ₹3,000 Lowest | 300 ₹7,500 | 200 ₹5,000 | 250 ₹6,250 | 200 ₹5,000 | 200 ₹5,000 | 500 ₹12,500 | 250 ₹6,250 | 220 ₹5,500 |
| 2.00 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6.0 m mean radius, built in CM (1:6) complete all as specified and directed. | 20 | Cum | 5,500 ₹1,10,000 | 5,000 ₹1,00,000 | 4,400 ₹88,000 | 4,000 ₹80,000 Lowest | 4,900 ₹98,000 | 4,500 ₹90,000 | 4,500 ₹90,000 | 4,800 ₹96,000 | 5,000 ₹1,00,000 | 6,500 ₹1,30,000 | 4,500 ₹90,000 |
| 3.00 | M&L for Brick work with old bricks (retrieved from demolition of brick work), straight or curved on plan exc 6.0 m mean radius, built in CM (1:6) complete all as specified and directed. | 5 | Cum | 2,000 ₹10,000 | 2,000 ₹10,000 | 2,000 ₹10,000 | 2,500 ₹12,500 | 1,500 ₹7,500 | 2,000 ₹10,000 | 1,000 ₹5,000 Lowest | 2,500 ₹12,500 | 2,000 ₹10,000 | 1,500 ₹7,500 | 3,000 ₹15,000 |
| 4.00 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete in channels and drains incl demolition of existing PCC complete all as specified and directed. | 3 | Cum | 3,000 ₹9,000 | 4,500 ₹13,500 | 2,000 ₹6,000 Lowest | 2,500 ₹7,500 | 2,000 ₹6,000 Lowest | 3,500 ₹10,500 | 2,500 ₹7,500 | 2,800 ₹8,400 | 4,000 ₹12,000 | 3,000 ₹9,000 | 3,500 ₹10,500 |
| 5.00 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels and drains incl demolition of existing PCC complete all as specified and directed. | 0.5 | Cum | 3,500 ₹1,750 | 5,000 ₹2,500 | 3,000 ₹1,500 Lowest | 6,000 ₹3,000 | 3,400 ₹1,700 | 5,000 ₹2,500 | 3,500 ₹1,750 | 3,500 ₹1,750 | 4,500 ₹2,250 | 4,000 ₹2,000 | 5,000 ₹2,500 |
| 6.00 | M&L for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc incl demolition complete all as specified and directed. | 30 | RM | 100 ₹3,000 | 100 ₹3,000 | 15 ₹450 Lowest | 200 ₹6,000 | 55 ₹1,650 | 200 ₹6,000 | 200 ₹6,000 | 20 ₹600 | 500 ₹15,000 | 80 ₹2,400 | 50 ₹1,500 |
| 7.00 | Taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed. | 500 | Sqm | 10 ₹5,000 | 25 ₹12,500 | 8 ₹4,000 Lowest | 15 ₹7,500 | 20 ₹10,000 | 10 ₹5,000 | 20 ₹10,000 | 25 ₹12,500 | 20 ₹10,000 | 15 ₹7,500 | 20 ₹10,000 |
| 8.00 | M&L for rendering in cement plaster in 15 mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:4 complete all as specified and directed. | 550 | Sqm | 200 ₹1,10,000 | 200 ₹1,10,000 | 180 ₹99,000 | 130 ₹71,500 Lowest | 220 ₹1,21,000 | 170 ₹93,500 | 160 ₹88,000 | 195 ₹1,07,250 | 190 ₹1,04,500 | 260 ₹1,43,000 | 220 ₹1,21,000 |
| 9.00 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plaster surfaces complete all as specified and directed. | 500 | Sqm | 70 ₹35,000 | 100 ₹50,000 | 65 ₹32,500 | 80 ₹40,000 | 60 ₹30,000 Lowest | 60 ₹30,000 Lowest | 65 ₹32,500 | 60 ₹30,000 Lowest | 80 ₹40,000 | 80 ₹40,000 | 65 ₹32,500 |
| 10.00 | M&L for applying Two of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on old wall surfaces complete all as specified and directed. | 1,500 | Sqm | 70 ₹1,05,000 | 80 ₹1,20,000 | 70 ₹1,05,000 | 65 ₹97,500 | 60 ₹90,000 | 60 ₹90,000 | 55 ₹82,500 Lowest | 60 ₹90,000 | 70 ₹1,05,000 | 80 ₹1,20,000 | 65 ₹97,500 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
7 Jul 2025, 6:00 pmClosed
GE AF Adm Area Agra
GE (AF) Adm Area Agra UP 282008
REPAIR TO DRAINS, PATHS, HARD STANDINGS, CULVERT AND OTHER MISC WORKS AT VARIOUS LOCATION UNDER AGE BR-II OF GE (AF) ADM AREA AT AF STATION AGRA.
2025_MES_714978_1
8000-2242/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Adm Area Agra
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE AF Adm Area Agra
₹70,000
Yes
6 Aug 2025
17 Jun 2025
9 Jul 2025
17 Jun 2025
7 Jul 2025
2 Jul 2025
Amount
Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exc 6.0 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for Brick work with old bricks (retrieved from demolition of brick work), straight or curved on plan exc 6.0 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete in channels and drains incl demolition of existing PCC complete all as specified and directed.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels and drains incl demolition of existing PCC complete all as specified and directed.
M&L for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc incl demolition complete all as specified and directed.
Taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed.
M&L for rendering in cement plaster in 15 mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:4 complete all as specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plaster surfaces complete all as specified and directed.
M&L for applying Two of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on old wall surfaces complete all as specified and directed.
All as per item No 10 here in above but one coat of acrylic emulsion paint as specified and directed.
M&L in repair pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) cover slabs for drain,man-holes etc set in CM (1:6) incl demolition of exissting complete all as specified and directed. Note: Steel reinforcement to be paid separately under respective item
M&L for mild steel TMT bar 10mm dia and overcut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for 75mm thick PCC type D2 1:4:8 (40 mm graded agg) as in sub-base, sub-floors,etc including demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for machine pressed rubber moulded precast coloured chequrered cement concrete tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed witth grey cement and no pigments in neat cement slurry over and incl 20mm thick screed bed in CM 1:4 as in floor finishes including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.
M&L for Providing and laying 60 mm thick factory made chamfered edge precast Cement Concrete paver blocks (interlocking tiles) of M-35 grade with any colour,design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer,through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and directed.
Fixing only in repairs serviceable interlocking tiles of any shape and size, laid, jointed over and including 50 mm thick sand cushioning including dismatling of existing interlocking tiles complete all as specified and directed.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), making drainage opening wherever required, including taking down old damaged kerb stone with nacessary excavation complete all as specified and directed.
M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed.
M&L for removing old enamel paint and cleaning with scrapers, any number of coats any width or girth and applying two coats of synthetic enamel paint over a priming paint on concrete surface complete all as specified and directed.
M&L for roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, etc and applying with brushing neat cement slurry @ 3.0kg of cement per sq. metre and apply a topping layer of 25mm thick PCC type B1 1:2:4 (20 mm graded agg) as in flooring complete all as specified and directed.
M&L for 75mm thick cement concrete type C-1 (1:3:6) (using 20 mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement with forming construction joints filled with filler incl demolition complete all as specified and directed.
M & L for 25mm thick cement concrete type B1 1:2:4 (20mm graded aggregate) as levelling course under floor finishes complete all as specified and directed.
M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:4) including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)
M&L for mirror polished machine cut kota stone slab flooring 18-22 mm thick over cement screed base in risers of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar (1:4) including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite incl ruunding edges including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.
M&L for 16-18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for ss bolts hold fastener, polishing, rubbing & including silicon treatment and moulding the edges as directed over and incl 15mm thick CM 1:4 including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.
M&L for 100mm thick cement concrete type C-1 (1:3:6) (using 20 mm graded stone aggregate ) as in paving, path finished even and smooth without using extra cement with forming construction joints filled with filler incl demolition complete all as specified and directed .
M&L for providing PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, benching,kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinges or steel sliding and hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and hold fasts etc. including dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.
M&L two coats of synthetic enamel paint to new steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M&L for preparation of old painted steel/iron surface of any description exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for welding in repairs exc 2.5cm but not exc 5 cm in length exc 6 mm but not exc 9mm thickness or metal to be welded and jointed (for fixing small articles like helical spring etc) complete all as specified and directed.
M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) in flat rough finished surface of concrete all as specified and directed.
M&L for RCC type A1 1:1-1/2:3 (20mm graded stone aggregate) M-20 as in stairways including steps, string pieces,carriages,slabs supported on walls, beams and columns in loors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc including demolition of existing reinforced concrete complete all as specified and directed.
C P Singh and Co (BID ID -3350557)
M/s Krishna Construction Company (BID ID -3348388)
R.S BUILDERS (BID ID -3349956)
M/s M S Sharma and Co. (BID ID -3348667)
GIRENDRA SINGH AND CO (BID ID -3349073)
m/s Agra Builder (BID ID -3350258)
M/S RADHEY GOVIND ENTERPRISES (BID ID -3349724)
Rahul Construction Co (BID ID -3348727)
J P CONTRACTORS AND SUPPLIERS (BID ID -3349818)
saroj constructions (BID ID -3350267)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .