PROVIDING AND LAYING PIPE LINE IN REMAINING STREETS, DEVELOPMENT OF WATER WORKS, REPAIR OF P.C. AND PROVIDING FUNCTIONAL HOUSEHOLD TAP CONNECTIONS ETC. AT WATER SUPPLY SCHEME NIHALUWAL, BLOCK MEHAL KALAN, OF DISTRICT BARNALA.

Amount

Repair of Inside Aluminium Ladder of OHSR Complete in all repects

Repair of outside M.S. Ladder of OHSR Complete in all repects

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) CSR Item No. 28.27

b) 100 mm I/d

Repair of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect as per drawing D-9 & Analysis of Rates A-10-1 to A-10-6 complete in all respects.

OHSR-100000 ltr Capacity outer dia of toe wall = 7.60 m

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material as per CSR 14.6

Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade 16.4

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.9m x 0.9m CSR Item No. 28.66

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case Railing and Pickets including cost of labour & material complete in all respects.

Earthing of OHSR including cost of labour & material complete in all respects.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects. asper CSR 28.90

Credit old Sluice Valve

Scraping of White washing inside of Pump Chamber & Scraping of snowcem robbiacem etc as per CSR 8.31 (a)

White washing 2 coats inside of pump chamber. as per CSR 16.2

Distempering with dry distemper of approved manufacture One coat on Old distempered work as per CSR 16.8

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade as per CSR 16.13 (Pump Chamber + Corner Pillar)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.as per CSR 16.16

Painting Two or more coats excluding priming coat with synthetic enamel paint in all shades on Wood work, Metallic or plastered, concrete surface to give an even shade.as per CSR 16.17

Painting Two or More coats with synthetic enamel paints in all shades on Old Wood Work or Metallic or plastered or concrete surface to give an even shade including rubbing down old paint. as per CSR 16.18

Applying priming coat with metal primer on new steel or iron work including preparation of surface.. (Metalic) as per CSR 16.20

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Metalic) as per CSR 16.19

Supplying & fixing glass panes including special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area. as per CSR 18.25 (b)

Kiln seasoned Hollock wood doors shutter with 12mm thick phenol Bonded BWP ply ISI Marked anchor, Kit ply, Nova Teak, National Or equivalent including Hinges, Screws, Shocks Cleats, Stops and Cords etc. complete fixed in position (Single Leaf). Phenol Bonded B.W.P. ply panel as per CSR 17.10 (xviii) (a) (i) (40mm thick)

Providing, Laying fixing & jointing of PVC pipes as per ISI-4985 (ISI marked with the prior approval of Engineer in charge) along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for more than 3 mtr street width including excavation & back filling complete in all respects as per Analysis-14A as per CSR 28.13

PVC pipe 63 mm o/d 6kg sqcm

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications

PVC pipe 63 mm o/d

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method including excavation , stringing and jointing of pipe as per CSR item 28.71

Connection of existing PVC/AC (All dia) pipe with new PVC (All dia) pipe including cost of PVC/AC tee, D-joint ,PVC saddle piece, earth work in excavation & back filling etc complete in all respects as per PWD Sepcification/Satisfaction of Engineer in charge .

Providing water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects as per site condition

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kg cm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 331 LPM against a head of 85.00 mtr (12.50BHP) along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 80 mm =54 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 4.00 mm^2 = 120 mtr (reputed make) complete in all respects as per standard Specifications.

Credit of Old Machinary ,Electrical Control Panel Board including Delivery

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-3.

12.5 mm thick cement plaster 1:5 on wall as per CSR 15.10

Construction of Cement Concrete, Foot Path with Precast Kerb & earth filling inside water works as per standard Drawing D-7 & Analysis A-10.

Providing Bleaching Powder Solution/ Sodium Hypo Solution complete in all respects