NIT 321Prov. Reconductoring of 11 KV HT line a/w CT PT unit to Competent Automobiles NEXA at Vill UESD HPSEBL Lambloo (ON PARTIAL TURN KEY BASIS).

Prov. R.C.C Muff.

ACSR Cond. 6/1/4.72 mm in mtr.

Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side)

Angle Iron (50x50x6 mm), Length: 750 mm x 2 No.

11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure

Pole Top Bracket [MSCI:100x50x6 mm- 100 mm]

Belt Set - MS Angle Iron: 50x50x6, Length :2800 mm x 2 No.

X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2600 mm x 2 No.

X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2800 mm x 2 No.]

Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)

Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures)

Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)

Stay Egg Insulator

H.T Coil earthing set complete

Continous Earth wire (GI, 8 SWG)

Cross Lacings (GI, 8 SWG) [@ 2 m spacing] {0.102 kg/m}

Eye Hook for earth wire

MS Angle Iron: 50x50x6, Length : 2800 mm for Earth Wire

Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ]

Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No]

Danger Plate (250X200X1.6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Barbed Wire

Aluminium Paint

MSCI-X-arm 75x40x6mm length 2800 mm for G.O Switch D.O Fuses Unit

Guide clamp for holding the 11 kV G.O Switch rod

11 kV D.O Fuse Unit

G.O AB Switch

Chain link fencing Angle iron gate etc

MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA's

Surge Arrester, 9 kV Station Class (Porcelain Type)

X-Arm: [Channel Iron (75x40x6 mm), Length : (2800mm) X 4 Nos] for supporting DO fuse unit & GO switch

GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm

Prov. GO switch

D.O Fuse Unit

Prov. CT/PT Unit 25/5 A

Prov. Control Cable 10 core 6 mm2

Prov. MS Channel Iron 2800x100x50x6 mm2 for CT/PT

Prov. MSCI 460x100x50 mm2 for CT/PT

Prov. MSAI 1500x50x50 mm2

Prov. Nut & Bolts off size

Alluminium Thimbles

Prov. GI Thimbles

Prov. Pipe 1/2 inch

Prov. Pipe bend

Prov. GI Gland

Prov. GI Strip 50x6mm

Prov. GI Strip 40x6mm

Prov. GI Strip 25x6mm

PVC Multistrand 2.5 mm² copper wire

Erection of HT Line Erection of Double Pole / Dead Pole Structure with Steel Tubular Pole 11Mtr Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for poles, muffing of pole, drilling of holes in poles and X-arms ,fixing of insulators,X-arms, erection of poles, fixing of barbed wire,danger plate,filling of pit ramming and painting painting of structure with Redoxide Primer & then with Aluminium Paint etc.Complete in all respect.

Erection of Single Pole Run through Structure with Steel Tubular Pole 11Mtr Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for poles, muffing of pole, drilling of holes in poles and X-arms ,fixing of insulators,X-arms, erection of poles, fixing of barbed wire,danger plate,filling of pit ramming and painting painting of structure with Redoxide Primer & then with Aluminium Paint etc.Complete in all respect.

Erection of Stay Set (HT) as per latest standard practices /specification of REC / HPSEBL including Digging of pit (size0.9x0.7x1 .5 M),fixing of Stay Rod, filling and ramming of pit, nozzelling and tightening etc. complete in all respect.

Erection of Continous Earth Wire / Guaring wire i.e. Laying of GI Wire 8SWG , Stringing, Sagging of and binding with Insulators including erection of Guarding wire & Cross Lacings etc. at road crossings/ where ever necessary.

Laying of Conductor, Stringing, Sagging of AAAC 7/3.15, 50mm² and binding with Insulators (3 wires) and fixing of jumper.

Erection of Preparation of 4-pole Structure Members Ci, Ai I.E. X0Arm & Knee Bracing Set complete in all respect

Erection of HT Earthing Set as per latest standard practices /specification of REC / HPSEBLincluding digging of pit of size 1.80x 1.2 x1.2 Mtrs, fixing of HT Earth Set, refilling the same and prov. earthing connection complete in all respect.

Erection of GO switch unit complete in all respect

Erection of CT PT unit Erection of 30Ø, 11 kV DS/ CS/ MIP/ IDWPS Connection above 50 kW to upto 100 kW CT PT Unit, Trivector Meter, XLPE Cable etc.Complete in all respect.

Erection of GO switch unit complete in all respect

Add Transportation charges and Mannual Chargess for the carriage material from storeto site as per site incharge instructions complete in all respect.

Please Enable Macros to View BoQ information