REPAIRS TO FLOORS, WALL JOINERIES, ROOF SHEET, CEILING, PLUMBING ITEMS AND CERTAIN MISC B/R WORKS AT SECT B AND OTM ACCN OF ZONE-IV AREA UNDER AGE B/R-II UNDER GE DINJAN

Amount

Dismantling asbestos cement (corrugated or semi corrugated etc.) sheets in roof coverings including ridge complete all as specified and as directed.

M&L for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls, etc. and fixed with L type or J-type or cranked hook bolts complete all as specified and as directed.

M&L for asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with L type or J type hook or cranked hook bolt with washer complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.

S&F for aluminium anodised snap grid frame work of size 600mmx600mm frame work for ceiling with aluminium tee section of size 23.5mmx26.4mmx1.4mm thick and aluminium angle section of size 36.5mmx25mmx1.4mm thick, for false ceiling including hangers 4mm dia galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of galvanised iron flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4mm thick non asbestos E-board (plain), HSPC fixed to frame including three coats of white wash complete all as specified and as directed. Make of E-Board :- Eternit Everest/lafarge/Armstrong/Visaka Industries Ltd

Taking down chowkats or frame not exceeding 1.5Sqm each with shutters (without taking off shutter from frame) complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from frame) exceeding 1.50 and not exceeding 4.0Sqm in each complete all as specified and as directed.

Taking down shutters of any descrption not exceeding 1.0Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0Sqm but not exceeding 2.0Sqm each complete all as specified and as directed.

Taking down and refixing shutter in same opeining of any description not exceeding 1.0Sqm each complete all as specified and as directed.

Taking down and refixing shutter in same opeining of any description exceeding 1.0Sqm but not exceeding 2.0Sqm each complete all as specified and as directed.

M&L for second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S&F for pressed steel door frame 125x60mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and as directed. Note : PCC filling of holloow section measured and paid seprately.

S&F for pressed steell door frame 105x60mm for doors/window with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and as directed. Note : PCC filling of holloow section measured and paid seprately.

S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specification and drawing comlete as specified and as directed.

S&F for factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing complete all as specified and as directed.

M&L for mild steel flat iron work as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F for 35mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S&F for 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and as directed.

S&F for 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated & prepare to received glass, gauge etc with sash bars, edges of framing plain chamfered or rounded fitted with cut and mitred bids for securing glass etc in window, ventilator etc, sizes of member of shutter as specified in SSR part-I, section 8 clause 8.24(b) complete all as specified and as directed.

S&F for 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for 150mm dia (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F for 12mm prelaminated particle board interior grade prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in shutter of cup board and other similar work complete all as specified and as directed.

S&F for butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for butt hinges 75mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 150 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F for 150 mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed.

S&F for 100 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F for 100 mm long mild steel, anodised, barrel tower bolts stove enamelled black, with bright bolt complete all as specified and as directed.

S&F for mild Steel sliding door bolts, 250 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed.

S&F for 4.8mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and as directed.

M&L for preparation of untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire & average width of aperature 1.18mm and fixed with tinned tacks are galvanized wire staples complete all as specified and as directed.

S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400X400X7mm) in floor, over 20mm thick screed bed or bedding in cement mortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade complete all as specified and as directed.

M&L for non skid tiles 7 to 8 mm thick area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm (600x600x7mm), in floors over 20mm thick screed bed or bedding in cement mortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick as in skirting/dado to match the length of floor tiles procured under items No 40 & 41 above includig over 10mm thick backing coat in cement mortar (1:4) on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for granite (of any type) work (tablerubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed or bedding in cement mortar (1:6) on floor and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in cement mortar (1:4) and jointed with ditto as per above tem complete all as specified and as directed.

M&L for chequered cement concrete tiles 25cmx25cmx22mm thick over 20mm thick screed bed or bedding in cement mortar (1:6) set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers and exceeding 15cm thick watered and rolled/rammed to a true surface with broken stone or boulders complete all as specified and as directed.

S&F for grating doom 100mm dia of PTMT, (minimum weight 25 gms) complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing 15mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and as directed.

S&F for steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20mm bore of pipe complete all as specified and as directed.

Refixing 20mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and as directed.

S&F for steel tubing 20mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore, bib tap, PTMT with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs stop valves, 15 mm bore of PTMT any colour high pressure screwed for iron pipe and screwed both ends for iron pipe or for unions complete all as specified and as directed. (Min weight 15mm -90gms)

S&F in repairs stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs, stop valves 15mm bore cast copper alloy, fancy type, chromium plated with long shank and cup (concealed) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions as specified and as directed.

S&F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repair waste coupling of PTMT (half or full threaded) complete all as specified and as directed. (minimum weight 32 mm-45 gms)

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mmx440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed.

S&F in repairs vitreous china pedestal pattern white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8, type D-2 to match with existing including complete all as specified and as directed.

S&F in repairs vitreous china bowl urinal flat back, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum wt 60 gms) complete all as specified and as directed.

S&F in repairs vitreous china semi pedestal pattern (Anglo Indian type) white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8, type D-2 to match with existing all as specified and as directed.

S&F in repair helath faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1 mtr long suitable for 15mm pipe complete all as specified and as directed. Make : Fortune/Parryware/Cera.

S&F in repairs 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket and flush pipe complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white,flat back, size 550x400mm with brackets,excluding pillar cock 15 mm bore CP, PVC connection of 450 mm long including PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and as directed.

S&F for 15mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs swivel shower rose of PTMT, 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc hoisting if required reconnecting and refixing in position exceeding 250 litres not exceeding 500 litres capacity complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc hoisting if required reconnecting and refixing in position exceeding 500 litres not exceeding 1000 litres capacity complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulalting pipes etc exceeding 250 litres but not exceeding 500 litres capacity complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exeedingc 500 litres but not exceeding1000 litres capacity complete all as specified and as directed.

Dismantling water tanks capacity exceeding 250 litres and not exceeding 500 litres and removing to store complete all as specified and as directed.

S&F for rotational moulded poly ethylene water storage tanks 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Dismantling water tanks capacity exceeding 500 litres and not exceeding 1000 litres and removing to store complete all as specified and as directed.

S&F for rotational moulded poly ethylene water storage tanks 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F for 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S&F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces as in ceilings (sunshade, chajja etc) and finished the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L two coats of distermper on walls with distemper oil emulsion over a coat of chalk whiting on plastered wall surfaces including preparation of surfaces complete all as specified and as directed.

M&L for two coats of exterior emoulsion paint to walls surfaces over a coat of primer incl preparation including preparation of surfaces complete all as specified and as directed.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete as specified and as directed.

S&F for glass dividing 3mm thick 38mm wide and inserted in position to conforming to design complete all as specified complete as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filling in proportion of bitumen and sand (1:2) complete as specified and directed.

S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete as specified and as directed.

S&F in repairs curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved in plan exceeding 6m mean radius built in cement mortar (1:6) using old size bricks complete all as specified and as directed.

M&L for brick work with sub class B old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

M&L PCC type C-1, 1:3:6 (20mm graded stone aggregate) for cills, hold fast filling of hollow of pressed steel door frame etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angles cleats or other connecting plates complete all as specified and as directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 ( using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete as specified and as directed.

S&F for PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 110mm dia complete as specified and as directed.

S&F for 110 mm bore, PVC (SWR) bends of any radius complete as specified and as directed.

S&F in repairs, PVC (SWR) 75mm dia, floor trap, plain with granting including jointing to waste pipe with solvent cement complete as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges complete as specified and as directed.

S&F for prepainted galvalume aluminum zinc coating galvanised iron based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and as directed.

M&L for prepainted galvalume aluminum zinc coating galvanised iron based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete as specified and as directed.

S&F for for aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified, including powder coating of minimum 50 micron thickness complete as specified and as directed.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleat glazing clips, rubber neoprene packing handle 2 Nos in each door, hinges, anodised aluminium snap beading screw etc. including powder coating of minimum 50 micron thickness complete as specified and as directed.

S&F for anodised aluminium window and ventiltor shutters, fixed/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleat glazing clips, rubber packing, anodised aluminium snap beading screw etc. complete all as specified including powder coating of minimum 50 micron thickness complete as specified and as directed.

S&F for aluminium anodised window grill, mesh size 75x75mm, 7 to 8mm thick including suitable aluminium cleat, fixed with steel screw to window frame complete all as specified and as directed.

S&F for aluminium (extruded section body) door closer hydraulically regulated, designation no.3, universal type suitable for shutters of 851 to 1000 mm in width & of weight between 61 to 80 kg & fixed complete as specified and as directed.

M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed :- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100m & n.exc.250m. (b) 15 mm thick plastering in cement mortar 1:4 finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm ) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be done by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm , complete all as specified and as directed.

Vicky Construction

NChetia and Sons Trading

Bimal Trading Company

Kaushik Enterprises

M/s GANDHESWAR PHUKAN

FREEZCON

STANDARD ELECTRIC WINDERS