Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹15.7 L+₹18,835 (1.21%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹15.8 L+₹25,210.20 (1.62%)Rejected-AOC 0 GRAMTHANG MINJEE KARGIL KARGIL LADAKH 194105 | KARGIL | LADAKH | 194105 | L3 | Rejected-AOC L3 | |
| 4 | L4₹16.0 L+₹41,410.20 (2.66%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
22 Apr 2019, 9:00 amClosed
GE KHUMBATHANG
GE KHUMBATHANG C/O 56 APO 900270
GE/KHU-02/2019-20 REPAIR/ MAINTENANCE OF EXTERNAL WATER SUPPLY SYSTEM AND ALLIED WORK UNDER AGE B/R-II AT GE KHUMBATHANG
2019_MES_244402_1
GE/KHU-02/2019-20
Open Tender
Civil Works - Water Works
Item Rate
180 days
KHALTSI
AS PER TENDER DOCS
7 documents required · 7 mandatory
₹500
GE KHUMBATHANG
₹28,000
Yes
15 Feb 2020
3 Apr 2019
23 Apr 2019
12 Apr 2019
22 Apr 2019
16 Apr 2019
Amount
Excavation in trenches, getting out in soft/loose soil not exceeding 1.5m deep and not exc 1.5m wide for taking out the existing cable of poles etc. any size at places complete all as specified and directed.
Removing of surplus soil to a distance not exceeding 50 mtr complete all as specified and deposited where directed at a level not exceeding 1.5m above the starting point all as specified.
Returning filing including spreading levelling, watering & well ramming in layers not exceeding 25 Cm thick all as specified.
Material & Labour for sand cushioning 15 cm below and 8 cm above the U/G cable laid (total depth of sand shall be 23 cm) complete all as specified & directed by Engr-in-Charge.
M & L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other all as specified and directed at site.
Taking up/down steel tubing/CI/Cement and connection from trenches incl connected fittings/accessories complete of following sizes for re use of serviceable pipes and removing the U/S pipes from site to safe custody : - (a) 80 mm bore
(b) 50 mm bore
(c) 40mm bore
(d) 25mm dia
(e) 20mm dia
Supply, laying & testing in trenches GI pipe medium grade ISI marked with all fittings complete all as specified for following sizes. (a) 80mm dia
(b) 50mm dia
(c) 40mm dia
(d) 25mm dia
(e) 20mm dia
Supply, fixing & testing on wall or laid under floor GI pipe medium grade ISI marked with all fittings complete all as specified for following sizes. (a) 25mm bore
(b) 20mm bore
(c) 15mm bore
Material and labour for brick masonry valve pit nominal size 60 cm x 60 cm x 60 cm with one brick thick wall using precast cement block of size 20cmx10cmx10cm brick in cement mortar 1:6 over 20 cm thick PCC plate form with 15 cm off set on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 and 50- mm thick RCC cover (in two equal parts 1:2:4) type B-1 with 10 mm dia deformed bars at 10 cm interval on both side including necessary form work with 150 mm dia hole in the center complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick masonry valve pit nominal size 45 cm x 45 cm x 45 cm with one brick thick wall using precast cement block of size 20cmx10cmx10cm brick in cement mortar 1:6 over 20 cm thick PCC plate form with 15 cm off set on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 and 50- mm thick RCC cover (in two equal parts 1:2:4) type B-1 with 10 mm dia deformed bars at 10 cm interval on both side including necessary form work with 150 mm dia hole in the center complete all as specified and as directed by Engineer-in-Charge.
Taking out old/unserviceable float valve and supply & fixing PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore complete all as specified and directed by Engineer-in-Charge.
Taking out old/unserviceable gate valve and Supply and fixing gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 50mm bre complete all as specified and directed by Engineer-in-Charge.
Description all as per item 12 here in before but 40 mm bore
Description all as per item 12 here in before but 25mm bore
Description all as per item 12 here in before but 20mm bore
Supplying and fixing, jointing, testing of Sluice Valve of sizes dia 80mm , ISI Marked, flanged ends drilled pressure rating PN-1.6, Confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valve and depositing to MES store yard complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints complete with jointing material shall be measured and paid separately.
Supplying and fixing, jointing, testing of Sluice Valve of sizes dia 50mm , ISI Marked, flanged ends drilled pressure rating PN-1.6, Confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valve and depositing to MES store yard complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints complete with jointing material shall be measured and paid separately.
M&L for Lagging to pipes of size 20mm bore used in water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, incl chicken wire mesh wire netting 25 gauge 20mm mesh and 0.01mm aluminium foil for covering of wire mesh and mineral wool complete all as specified and directed .
Description all as per item 18 here in before but 15mm bore complete all as specified and directed
Taking down dismantling, disconnecting carefully and transportation for taking electric motor 415 vols 50 Hz 3 phase submersible motor 02 to 05 HP to workshop complete all as specified and as directed by Engr in charge.
M&L for complete rewinding, servicing and refixing of 415 volts 50 Hz 01 to 02 HP submersible motor and refixing/lowering down at existing same place and testing incl required accesssories i.e. nuts bolts, washers etc complete all as specified and as directed.
M&L for complete rewinding, servicing and refixing of 415 volts 50 Hz 03 to 05 HP submersible motor and refixing/lowering down at existing same place and testing incl required accesssories i.e. nuts bolts, washers etc complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized iron strip 32x6mm by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary excavation and earth work in any type of soil including medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including provn of charcoal & common salt for insulation upto 15cm height all around the plate complete all as specified and shown in EP-3 of SSR Part-I.
Description all as per item 23 here in before but size of earthing lead 4 mm dia wire with GI proection pipe of 15mm dia upto 7.5 mtr etc
S & F in repairs MCCB 63 Amp, 4 pole 25 KA with release adjustable thermal & fixed magnetic complete all as specified and as directed.
S & F in repairs MCCB 100 Amp, 4 pole 25 KA with release adjustable thermal & fixed magnetic complete all as specified and as directed.
M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified.
M & L for jointing testing straight through termination joint (heat shrinkable) suitable for 3.5 core 1.1 KV u/g XLPE of size 25 to 50 sq mm complete including taking down existing unserviceable joint all as specified and as directed by Eng-in-Charge.
M & L for jointing testing straight through termination joint (heat shrinkable) suitable for 3.5 core 1.1 KV u/g XLPE of size 70 to 120 sq mm complete including taking down existing unserviceable joint all as specified and as directed by Eng-in-Charge.
S&F changeover switch 200 amp 415 volts four pole with sheet metal enclosure complete all as specified
S&F changeover switch 125 amp 415 volts four pole with sheet metal enclosure complete all as specified.
M & L for jointing testing end termination joint (heat shrinkable) suitable for 3.5 core 1.1 KV u/g XLPE of size 25 to 50 sq mm complete including taking down existing unserviceable joint all as specified and as directed by Eng-in-Charge.
Complete all as per serial item No. 32 herein before but size of cable 70 to 120 sq mm
Labour / Pipe fitter only for cheking of loose connection of pipe line, gate valve, sluice valve and other connected accessories complete all as specified and directed (Note : Items used will be measured and paid separatly)
S&F DOL Starter for submersible motor of capacity 05 HP, 415 volts, 50 HZ 3 Phase complete.
Disconnecting & taking out existing unserviceable cable of 35/50/70sqmm 3.5/4 core complete all as specified and as directed.
Supply and laying XLPE insulated screened PVC bedded galvanised steel strip armoured electric power dable heavy duty 1100 Volt grade with stranded aluminium conductor of size 70 Sq mm 3.5 core complete all as directed.
Complete all as per serial item No. 37 herein before but size 50 sq mm 3.5 core.
Complete all as per serial item No. 37 herein before but size 35 sq mm 3.5 core.
M&L for Cleaning of under ground water sump internally from base to top including scraping the mud, silt from base and walls washing the complete internal surfaces with clean water, removing the silt/mud water out side cantt area and desilting from connecting pipes and applying internally one coat of lime wash to RCC walls, base of tanks of cap 50000 ltrs complete all as directed by Engr-in-charge.
Deduct Credit for Demolished/ Dismantled material Rs. (-) 29005.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note: Tenderers will not quote against this item being a tentative amount to be considered to arrived at the 'Contract Sum'
M/S TAMCHOS GURMATH
M/S MOHD ALI
M/S ALI GHULAM
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .