Structural repair, painting, toilet renovation and miscellaneous civil works at CMPD building and other sea side buildings in BARC, Trombay, Mumbai.

Amount

Dismantling old plaster/skirting carefully,raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling C.I pipes of following dia in shafts / open piping including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

100 Dia CI. Pipe

Dismantling Aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Dismantling Plain Cement concrete manually / by mechanical means carefully with out damaging adjecent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling of RCC works including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm

Removing/dismantling the sanitary appliances along with all connections, chiselling the embedded portions, screwing out all inter connections and proper plugging of the inlets and outlets to avoid leakages/water spilling etc.from all the floor level stacking the dismantled materials within 50 mtr. lead and as directed by Engineer-in-charge.

Dismantling Water closet, bowl type/flat back urinals with cistern/push cock, Wash basin, flushing cistern of any size, sinks etc., including stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead

Existing GI/CI/PVC etc. pipelines along with all fixtures & resurfacing the surface if required with existing finish etc. complete as directed.

Shower, Bib tap, stop cock, piller tap, gate valve, ball cock, Nahani trap, bottle trap, urinal spreader Flush cock.

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below

Taking out C.I cover with frame from R.C.C Top slab of inspection chambers of various sizes including demolishing of R.C.C work manually / by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Lead charges for Lead Exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. 'Note: The rates in respect of this Item are applicable for NET Quantities arrived at after making deduction for voids @ 30% in respect of debris and 20% in respect of Soil from corresponding TRUCK Measurement.

Debris

Carrying out manual miscellaneous carpentry work like minor repairs, fixing departmental fitting & fixures etc. as and when required andas directed by EIC. Notes : 1) Carpenter/labour should carry necessary carpentry tools like handsaw, hacksaw, chisels, cutter machine, grinding machine, glass cutters, drilling machine, punch, callipers, mallets, hammers, ladder, screw driver set, Ln Key set etc and consumables like screws, nails, rawl plugs,adhesives etc. complete required for various carpentry works and cost of which is deemed to be included in the quoted rate. 2) Payment shall be made as per the log book duly approved by EIC. 3) contractor shall arrange necessary PVC for this work.

Carpenter with valid pvc

Helper with valid pvc

Providing 3 level polishing including Mirror Polishing of Terrazo / STILAN / Kotah stone flooring complete as directed by the Project Engineer (Polishing is included in all the items This item to be operated for old works with the approval of Chief Engineer only)

Providing 15 mm thick plastering using Ready mix Internal Plastering compound of approved equivalent for Internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site.

Providing 20 mm thick Internal plastering in C.M without cement punning 1:4 (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing 20 mm thick plastering using Ready mix External Plastering compound of approved equivalent for External faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height all as per specificationst including forming drip moulds wherever necessary and as complete. and as directed by Engineer-in-charge.

Providing and laying water proofing treatment in sunken portions of WCs, bath rooms etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg/sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m. including injecting cemnt slurry .This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg/sq.m mixed with water proofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using crushed sand) admixed with proprietary water proofing compound conforming to relevant IS and approved by Engineer-in-charge including mixing fibre at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slury in bottom and all the sides of sunken portion. complete as directed by the Enginer-in-charge. The treatment to be tested for water tightness before filling the sunken areas. Note : Tentative / suggested make for the gudance of the bidder (s) : M/s. 'RECRON 3S' fibre or equivalent make.

Providing & applying Chemical based water proofing of Modified Acrylic Emulsion Polymer and Elastomeric waterproofing coating meeting technical parameter / specification over terrace slab/ parapet/ side walls etc. at all elevations including polycon based fibrous net all complete including cleaning and preparation of surface and testing by ponding water complete with following operations: 1. Removing of all loose materials by wire mesh and clean entire terrace with clean water by using water jet wherever required. 2. Opening all visible crack by plaster cutting machine in "V" shape, 3. Diluting binder with water in the Ratio of 1:4 and pour on the bare slab to be treated, 4. Apply binder and cement in the ratio of 1:1 and water to obtain paste like consistency and fill the cracks. 5. Applying bond coat of binder and cement in the ratio of 1:1 to entire terrace. 6. Apply first coat of binder & cement at the rate of 1.48 Sq.M per litre of Modified Acrylic Emulsion Polymer and Elastomeric waterproofing. 7. Laying of polycon based fibrous net (polyester geotextile of minimum 80 GSM) for entire area immediately before drying of first coat to get proper bonding. 8. Applying one more coat of binder & cement above fibrous net. 9. Applying 2 coats of Flexcoat-WP @ 2.40 Sq.M per litre with dilution 10% weight of potable water, 10.Test the surface for water tightness. PHYSICAL PROPERTIES: Appearance : Milky white emulsion, Solid content (150°c/ 20 min.) :47.0 ± 0.5%, pH : 8.0-10 Viscosity (Brookfield LVF#1/60 @ 25°c) : 160 cps Max., Film test (draw down 250-micron ambient temp.) : Clear, free from bits, Slightly tacky, Minimum Film Forming Temperature (MFFT): 10 degree centigrade to 12 degree centigrade, Specific gravity of emulsion (typical) : 1.025-1.035, Film casting test @54°c dried overnight on rolling : Flexible, should not crack Note : Tentative / suggested make for guidance of bidder(s) : M/s. Indofil - MC76 or equivalent make

Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured)

Providing and constructing Brick work in cement mortar using Standard bricks of approved quality / class, make / brand in foundation and plinth including curing, raking out joints simultaneously pointing below plinth level if specified complete as per drawing specifications and as directed by the Engineer-in-charge

Brick work in C.M 1:6 using crushed sand.

Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item)

Providing and Laying cement concrete 1:2:4 in Super structute (1 cement, 2 river sand 100%, 4 Brick aggregates 20 mm to 40 mm) for filling Sunken floors of Toilet bath & kitchens admixed with proprietary water proofing compound confirming to IS 2645 and approved by Engineer-in-charge including scaffolding, consolidation, finishing curing etc.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels

For Sub Structure

For Super Structure

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. 'Steel supplied by the contractor

Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor confirming to IS:1786.

Providing Structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) '5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item.

Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge

Using 100% SFMC

Using SFMC with 50% Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment)

Providing and fixing double Tubular scaffolding system using H- Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Cuddapah stone slab over kitchen platform to support granite slab etc. using 25mm to 30mm thick machine cut double machine polished slab in single piece upto maximam length of 1.8 m laid over 20mm thick cement mortor bedding 1:4 finished to proper levels, cured etc complete.

Providing and fixing Minimum 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and Painting two coats of Synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. Note : Internal painting to be carried out in occupied areas may involve restricted working condition viz. taking up painting work according to users convenience and as and when areas are made available, shifting/covering of furniture, equipment etc.

Providing, applying wall painting two coats with Lustur paint of approved brand to give an even shade over a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and applying one coat of cement primer of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge.

Providing and painting walls with (TWO coats) of approved shade of high build protective, elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush, scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water on all type plaster and all as directed by Engineer-in-charge. Note : Instruments and others for measuring the DFT is to be arranged by contractor and cost is included in this rate. Nothing will be paid extra.

Providing and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of 50 micron thickness over steel surfaces at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat). On STEEL surfaces. Note : Tentative / suggested make for guidance of bidder(s) : EPILUX-13 High Build primer or equivalent make

Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in- charge

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC /neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass/stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. 5) The fittings, glazing and panelling shall be paid for separately. 6) Measuring instrument for thickness of anodising/Elcometer should be present at site. 7) Payment of aluminium will be made after checking of anodising thickness. Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra over for aove item for colour anodizing

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) (Note : Measurement of glasses includes old glasses will be taken outside of BARC for disposal by contractor at his own cost.

With tinted colour float glass panes of 5.00 mm thickness

With clear float glass panes of 4.00 mm thickness

With clear float glass panes of 5.00 mm thickness

With clear float glass panes of 6.00 mm thickness

Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing, supplying and fixing Vertical Venetian Blinds with all accessories and fabticating to required sizes etc as per approved design and approved Fabric complete all as directed by the Project Engineer.

Providing and fixing mortice latch and lock of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden /steel/ FRP/ doors as per specifications.

Providing and fixing 12 mm thick pre-laminated Particle board flat pressed 3 layer or graded wood particle board conforming to IS12823 Grade-I, Type - II in panelling fixed in aluminium doors,windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides

Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 microns with a opening size of 120mm x 75mm and minimum weight of 2.64 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg / sq.mm. Note : Tentative / suggested make for guidance of bidder(s) : M/s. DECO GRILLE make or equivalent make

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design

150 x 100 mm size gully trap "P" type

Providing , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge.

15 mm dia G.I pipe

20 mm dia G.I pipe

25 mm dia G.I pipe

40 mm dia G.I pipe

50 mm dia G.I pipe

Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint

Providing, supplying, fixing in position in walls Rain water down take pipes using Centrifugally cast iron pipes (3.00 metres long) including required specials like bends, shoes etc for Rain water down take pipes Confirming to IS.3989 of approved make including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes,painting with primer , fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

100 mm C.I rain water down take pipe with 1.00 kg lead / joint conforming to relevant IS

Providing & fixing in position heavy pattern screw down gun metal Gate Valve with handles and wheels conforming to IS:778 including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge.

Providing and fixing viterious China washbasin of approved make and colour with C.I. brackets, 15mm C.P. brass pillar tap of approved make, 15mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China washbasin size 630 x 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

White vitreous China counter top / counter below wash basin size 560 x 410 mm /560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models)

Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia bib cock of approved type and make .

Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing C.P Brass Angle cock of Heavy Quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

15 mm n.b CP Brass Angle cock of approved equivalent make and type

Providing and fixing C.P Brass Concealed Stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

15 mm n.b CP Brass Concealed stop cock of approved equivalent make and type

Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long

Providing and fixing Heavy Quality C.P Brass waste coupling of following dia for wash basin and sink of approved make, size and quality all as directed by the Engineer-in-charge

C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.

CP Brass Waste coupling 38 mm dia of approved make Half threaded or Full threaded as per requirement.

Providing and fixing Heavy Quality Stainless Steel/C.P Brass Grating of approved make as specified for Floor traps /Nahani Traps all as directed by the Engineer-in-charge

SS Grating 125 mm dia

Providing and fixing Brass 15mm C.P presstomatic series auto shut urinal flush cock of approved make and quality

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm.

Providing and fixing Heavy Quality 15mm C.P brass swan neck pillar cock of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing stainless steel AISI 304 (18/8) satin finish kitchen sink with drain board with over all size of 1145 x 510 mm and bowl size of 560 x 410 mm and 241 mm depth of approved make and model with C.I. brackets and stainless steel waste coupling, fittings, including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried.complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing white vitreous china laboratory sink of size 530 x 430 x 180 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass trap with C.P. brass unions complete including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever required complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing Satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 545 x 445 x 200 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

Supplying and fixing Cast Iron Man hole cover or Cast Iron Steps of approved make of weight specified in the drawings or as directed by Engineer in charge.

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x 350 mm/610 mm with Push cock & with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge

Providing and fixing Minimum 15-17 mm thick stone slab table rubbed, edges rounded and both side machine polished of size 75 x 50 cm or approved size and shape of 1.8cm thick fixed in urinal partition by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (using 6mm nominal size aggregate) as per direction of Engineer-in-Charge and finished smooth. (Granite slab of approved shade)

Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50 metres flexible hose (Hand Shower) with wall brackets or approved equivalent make and type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.

Raising of Inspection chambers of Internal size clear dimention of 900 x 600 mm/Circular manhole 0.9 m dia in 230 thick brick masonry with Cement mortar 1:4 Plastering of 20 mm thick cement mortar 1:4 on inside & out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm/circular manhole 0.56 m dia, Fixing of C.I Frame and cover with CC 1:2:4 concrete, and fixing Cast Iron Steps if necessary at 300mm intervals complete.(C.I steps will be paid separately under relevant item)

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Heavy Quality C.P brass sink cock (table mounted model) of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing mirror of superior glass of approved quality and of required shape and size with 6mm thick Plain A.C sheet backing fixed to walls with consealed Brass C.P Mirror screws and consealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge

Extra for providing and fixing mirrors with approved make- stainless steel 304 grade STUDS (with wall spacers) complete all as per specifications and as directed by the Enginner-in-charge

Providing and fixing 25 mm thick Colour PVC Integral Foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Filling the gap between aluminium frame & adjacent RCC / Brickwork / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and directionof Engineer-in-charge complete Up to 5 mm depth and 5 mm width.

Providing and fixing solid plastic seat of approved colour suitable to existing EWC with lid including CP brass / SS bolts, screws etc. for pedestal type W.C. pan complete as per specifications and as directed by the Engineer-in-charge

Removing carefully the existing damaged sliding windows/door and refixing after repair with providing & fixing necessary screws, star lock, roller, beading and sealing with silicon complete as directed by Engineer in Charge. 'Notes : 1. only Star lock and roller will be paid in subsequent item. 2. Screws, rubber beading, silicon filling etc. will be included in items.

Supplying of unskilled man power / labour for loading / unloading, area cleaning and miscellaneous civil works etc including cost of equipment whichever is required at site.

Providing and fixing Chinaware Half round Urinal channel 100 / 150 mm dia with or without dead ends set in C.M 1:3 laid to proper slope & grade including finsihing the joints with polymer based tile grout mix as per drawing and as directed by the Engineer-in-charge.

Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing 150 X150 mm soap dish of white viterious Chinaware, of approved make including chasing walls making good the same after fixing the China Soap dish etc. complete all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Vertical type, wall mounted, heavy duty stainless steel liquid soap dispenser of approved make (500 ml).

Providing, laying to the slope specified and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the order of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete excluding excavation and refilling which will be paid under relevent Item. 150 mm diameter stoneware pipe

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Oriental Integrated Facility Management Pvt Ltd