SPL REPAIR TO BLDG NO TS-129, 273, 348 , 349 AND TN135 (OTM) AT NAGROTA MIL STN UNDER GE NAGROTA

Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling boarding/wall panelling any description fixed in any position with nails complete all as specified and directed.

M&L 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in repair with screws to timber frame work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed.

M&L Rolled MS sections as in framing (roof trusses,purlins)for cladding, glazing and the like including door frames/chowkats, fixed with angle cleats and connecting plates of grade Fe 410-W (Gde E-250), etc complete all as specified and directed.

S & F MS work framed brackets of angles or tees with web and flanges cut to shape drilled and couter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling of wall and ceiling boards(fibre, pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets complete all as specified and directed.

M & L 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x 60cm in size , fixed with nails to timber frame work or with staples on snap grid ISI Marked , cutting circular holes for electric fittings ,including preparation of surfaces, fillar coat with filler, or liquid filler,transparent,and bringing forward surfaces to smooth even finish and applying three coats of white wash complete all as specified and directed.

S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of grid 605 x 605mm complete all as specified and directed.

S&F for Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling, complete all as specified and directed.

M&L 4 mm thick non asbestos fibre cement building boards (size 600X600mm) fixed or laid / inserted to timber / GI / Aluminium frames work with screws as in ceiling flat or sloping incl refixing in position of electric wiring, lights and fittings etc, complete if exists complete all as specified and as directed.

S&F PVC sheet wall lining consisting of 5mm thick colour / printed PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed.

Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.

Taking down chowaket & shutter exceeding 1.5 Sqm and n exc 4 Sqm removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed..

S&F Anodised aluminium powder coated frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as all as specified and directed by Engineer-in-charge.(Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.

S & F Anodised(powder coated) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S & F 5.0mm thick Sheet Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane with oil putty in square exc 0.5 sq. m in each pane. complete all as specified and directed.

S & F in Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

S & F floor Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.3, universe type, suitable for door shutters of 850 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F in Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

S & F in Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

M&L for 40mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutter(double leaf) open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats complete all as specified and directed.

Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter with wood free EPS 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all s specified and as directed.

S&F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing complete all as specified and directed.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S & F 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete

S& F 1st class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and directed.

S&F 65mm long butt hinges (medium weight) colled rolled mild steel fixed with welding complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised of size 150mm long 12mm dia. complete all as specified and directed.

S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate. complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. complete all as specified and directed.

S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed. complete all as specified and directed.

S&F Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed. complete all as specified and directed.

S&F iron 6 pin cloth Hanger Wall Mounted Door Mounted Bathroom Cloth Wall Hook, Door Hooks Rail for Hanging Keys, Ivory complete all specified and directed.

S&F in repair harrison rails, stainless steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 as in benching coping,drain cover,manhole cover etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc. complete all as specified and directed.

M & L for Form work to chajjas troughs and similar items including edges flat surface and fair finished. complete all as specified and directed.

M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but n.exc 10 cm. complete all as specified and directed.

S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia. complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles. complete all as specified and directed.

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified and directed.

All as per as above item No 54, but except bricks complete all as specified and directed..

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally) complete all as specified and directed.

M&L for Rendering (10+5)mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( wpc to be paid measured and seperately) even and smooth without using extra cement complete all as specified and directed. ( Externally)

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface . complete all as specified and directed.

Supply only integral water proofing compound. complete all as specified and directed.

M & L for Preparing of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of white wash. complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface . complete all as specified and directed.

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall care putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface complete all as specified and directed. .

M & L for Preparing old plastered surfaces of wall and applying one coat of cement based paint all as specified .

M & L for Preparing old plastered surfaces of wall and applying one coat of oil bound distemper etc complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), over a coat of wall putty 2 to 3mm thick as per site requirement to smoothening the existing surface, complete all as specified by Engineer-in-charge.

M&L for Complete removal of existing treatment of old plastered surfaces and applying two coats of Anti fungal weather coat with acrylic smooth exterior emulsion paint with silicone additives of required shade applied 1.67kg/10sqm of required shade over a coat of primer applied 2.20kg/105qm on old surfaces over a coat of wall putty 2 to 3mm thick as per site requirement to smoothening the existing surface, complete all as specified and directed. General Note for Srl Item No 66 & 67 :- (a) Preparation/scrapping of surfaces will be carried out through machinery only. (b) Each stage le application of pnmer, application of exterior emulsion first and second coat will be passed from Engr in Charge. All painting work will be carried out through machinery only. (c) A warranty of five years or as per manufacturer's instructions, whichever is higher and 2% of retention money as a guarantee against the work done will be furnished by the tenderer for all interior and exterior painting work. (d) The entire stock of paint will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with the user, either PMG rep/ user unit rep will be present when the storeroom will be opened for the issue of paints for specific wk (e) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces. complete all as specified and directed.

M&L one coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10cm width or girth including preparation of old steel surfaces complete and all as specified and directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded curshed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L PCC 1:2:4 type B1 using 20mm graded stone agregrate as in surface channel and drain. complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough complete all as specified and directed.

M&L for Machine cut kota stone flooring 18-20mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:6) as in floor finished, complete all as specified and directed..

M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and riser of stair case size (0.90-1.00x 18-25cm) jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) over 15 mm thick rendering in CM ( 1:4), complete all as specified and directed.

M&L Makrana white marble 18- 20mm thick machine cut, bedded jointed and pointed with white cement slurry including cutting and polishing types (mirror finish) over 15mm thick screed bed in CM ( 1:6) as in floor finished, complete all as specified and directed.

M/L Cement concrete in ,sub base flooring, filling and mass concrete typeE2, 1:5:10 (using 40 mm graded granite stone aggregate) Complete all as specified and as directed.

M&L for, chequered cement concrete tiles 30cmx30cmx(22-25)mm thick set jointed and pointed in gray cement and with pigment in floor including 20mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified and directed.

M&L for, chequered cement concrete tiles 30cmx30cmx(22-25)mm thick set jointed and pointed in gray cement and without pigment in floor including 20mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified and directed. .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed

M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or beddding layer of CM 1:6, 15 mm thick over complete all as specified and directed.

M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed.

M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed.

M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.18 sqm but not exc 0.38 sqm set and jointed in white or coloured cement to match on vertical surfaces such skirting ,dados, rises to steps etc over 10mm thick rendering in cement mortar in 1:6 complete all as specified and directed.

M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed white or coloured cement to match with the shade of tiles over 15mm thick plater CM 1:6 complete all as specified and directed.

M&L polished vitrified tiles light shade 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exc 0.36 spm in floor etc set and jionted in neat cement slurry and pointed white or coloured cement to match including roughning of concrete surfaces over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L polished vitrified tiles light shade 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exc 0.36 spm in skirting etc set and jonted in neat cement slurry and pointed white or coloured cement to match including roughning of concrete surfaces over 10mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down steel tubing and connection including cleaning or removal to store bore of pipe 15mm complete all as specified and directed.

Taking down steel tubing and connection including cleaning or removal to store bore of pipe 20mm complete all as specified and directed.

S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors. complete all as specified and directed.

S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs. complete all as specified and directed.

M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls. complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), incl CP jet PVC pipe ,Sheet cover fixed in repair complete all as specified and directed.

S& F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe complete all as specified and directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fixing vitreous china wash hand basin, white/light coloured of size 550 x 400 mm flat back including waste pipe, CP coupling complete all as specified and directed

Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr etc complete all as specified and directed.

S&F Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position including dismantling of existing tank and including PVC float valve 20 mm bore . complete all as specified and directed.

S & F rotational moulded 1000 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified and directed.

S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F in PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and directed.

S&F ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore complete all as specified and directed. (minimum weight 210 gm).

S & F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S/F Bib cock with wall flange15mm bore Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipe complete all as specified and directed.

S&F in repair 15 mm bore Brass CP Wall/Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F Brass chromium plated shower rose 125mm size with or without swivel joint, including fixing to steel pipe or union complete all as specified and directed.

S&F Cast copper alloy CPstop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed.

S&F stainless steel soap dish holder including fixing arrangement complete all as specified and directed.

S & F in repair CP toilet paper holder with flap and fixed in position. complete all as specified and directed.

S&F Towel rail 600mm long of chromium plated fixed with including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. ( Minimum weight 190gm).

M & L CP towel ring complete fixed in repair. complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.

S&F PVC (SWR) floor trap/ nahani trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as specified and directed.

Demolition and breaking up 100mm AC pipes incl all fitting complete all as specified and directed.

S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor. complete all as specified and directed.

S & F PVC (SWR) bend any radious 110mm bore complete all as specified and directed.

S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete all as specified and directed.

S & F PVC(SWR) reducers 75/110mm bore complete all as specified and directed.

S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F PVC (SWR) 110mm Junction single (single T) equal or unequal. complete all as specified and directed.

S & F PVC (SWR) pipe 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor. complete all as specified and directed.

S & F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. complete all as specified and directed.

M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specified and as directed.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC Mesured and Paid Separately.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all as specified and directed.

M & L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

M & L for Applying one coat of aluminium paint on top of APP membrane. complete all as specified and directed.

(SCHEDULE-A PART-II E/M Works) Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and as directed.

Taking down ceiling fan/Wall mounting fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and as directed.

Taking down existing light fitting of any type or make complete all as specified and as directed.

All as per above item 134 but for One 3 pin socket out let 5Amp controlled by one switch on same board complete all as specified and as directed.

All as per above item 134 but for One 3 pin socket out let 5 Amp controlled by one switch on independent board complete all as specified and as directed.

All as per item No 134 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15/16 Amp switch on independent board. complete all as specified and as directed.

All as per item No 134 above here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete all as specified and as directed.

S & F Modular switch one way 5/6 Amps suitable for 1 Module complete all as specified and as directed.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and as directed.

S & F Modular switch one way 15/16 Amps suitable for 1 Module complete all as specified and as directed.

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular blanking plates 1 module complete all as specified and as directed.

S&F Modular bell push piano type 5 Amps complete all as specified and as directed.

S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and as directed.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F for LED bulb 9 watt rechargeable type complete all as specified and as directed.

S&F electric bell ding dong 230 volt AC complete all as specified and directed.

Supply and fixing LED lights fitting 4 feet, 1x 22 W, 220V, aluminium body with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 18 W, 220V, inverter chargeable backup minimum upto 1 hr connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F LED light fitting 1X 9 W polycarbonate bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and as directed.

S & F LED light fitting 1X15 W polycarbonate bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and as directed.

Supply and fixing in repairs decorated white wall light with LED bulb of 5W B-22 base complete including making connections complete all as specified and as directed.

Supply and fixing in repairs decorated bed lamp with LED bulb of 5W B-22 base complete including making connections complete all as specified and as directed.

Supply and fixing swing type wall mounting fan 400 mm sweep single phase AC 230/240V 3 speed regulation, 1350 RPM , copper wounded complete for wall mounting incl grouting, holding down bolts, nuts complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Taking down carefully Ceiling fan/Geyser kept in safe custody and refixing after oiling, servicing and testing complete all as specified and directed.

S&F sheet metal enclosure double door for distribution board factory made for MCCB DB load link VTPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar in and including 125 A MCCB 4pole, 16 KA fixed in incomer pre-wired complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs complete all as specified and as directed..

S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs complete all as specified and as directed..

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs. complete all as specified and as directed.

S&F MCB SPN 40 A to 63A 10 KA 240 volts "C" series complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps 10 KA 230 volts "C" series complete all as specified and directed.

S & F in place of unserviceable sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 25 Amp complete all as specified and as directed.

S&F sheet metal enclosure distribution board SPN 2 way 230 V, 50 Hz single door without bus bar including making connections complete with blank plate complete all as specified and as directed.

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections complete all as specified and as directed..

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 mtr in depth and 1.5 mtr wide and getting out for laying of cables. complete all as specified and as directed.

Returning and filling in including spreading, leveling , watering and well ramming in layers not exceeding 25 cm thick excavated earth complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

Supply and fixing of DWC pipe for cable protection with outer dia 40 mm and inner dia 30 mm incl coupler and other accessories as required at site complete all as specified and as directed.

Supply and fix house service static electronic temper proof energy meter AC single phase static energy meter of accuracy class 1.0 rating 10-60 A, 240 V ,50 Hz static watthour meter, complete fixing in wooden box and making connections fixed on wall with suitable clamps nut bolts complete all as specified and as directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and as directed.

Please Enable Macros to View BoQ information