Construction of Rastipur Jaunpur Border Link Road ke Amrauwa Nala per 3x5.0 Meter Spawn ka RCC Box Culvert, Aproch Road in District Pratapgarh

Box Culvert work

Earth work in excavation of foundation of structures as per drawaing and technical specification including setting out construction of shoring and bracing, removal of stumps and others deleterious matters and Dressing fo sides and bottom and backfilling with approved materials including labour cess. (Excluding GST) (Box Culvert)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structure graded and compacted to meet requirement of Tables. 300.1 and 300.1. As per Technical Specification Clause 301.5 including labour cess. (Excluding GST)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification. As per MORTH Ref. No. Ch. 15.03 (304) including labour cess. (Excluding GST)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compaced by vibration including curing for 14 days. As Per MORTH Ref. No. Ch. 9.03 (2100) incluidng labour cess,Royalty etc (Excluding GST)

RCC Grade M30 using batching plant transit mixer & manual placing. As per MORTH Ref. No. 12.08 (1500, 1700, 2100-G, Case-II) incluidng labour cess,Royalty etc (Excluding GST)

Supplying, Fitting and placing un-coated HYSD bar Reinforcement in foundation complete. As per drawing and technical specification. As per MORTH Ref. 15.13 (1600) incluidng labour cess etc (Excluding GST)

Providing and laying flooring complete with Rubble stone laid in cement mortar (1:3). As per Drawing and Technical Specification laid over cement concrete binding. incluidng labour cess,Royalty etc (Excluding GST)

Providing and laying of Filter Media with granular materials/stone curshed aggregates satisfying the requirements laid down in clause 2504.2.2 of MORTH specification to a thicknesss of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wingwall and return wall to the full height compacted to a firm condition complete. As per drawing and technical specifiation. incluidng labour cess,Royalty etc (Excluding GST)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical. As per MORTH Ref. No. 15.14 (2706 & 2200) incluidng labour cess etc (Excluding GST)