Construction of Upgradation of 66 KV Substation Mubarkpur to 220 KV Substation Mubarkpur

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work isnot involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres

Cement concrete 1:6:12 mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:8:16 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:5:10 mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:4:8 40mm gauge mixing by mechanical means using concrete mixer volumetric type

CC 1:2:4 mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated

Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Supplying & laying dry brick bats

Extra for using needle vibrator where not included in the rates .

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level

First class burnt work laid in cement sand mortar 1:7 in foundation and plinth in harvesting well

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

first class brick work laid in cement sand mortar 1:6 in foundation and plinth

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

First class B/W 1:4 laid in mud mortar in Fnd & plinths

Extra brick works addl. Storey up to 4 mtr above top of structural roof

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure

Extra rate for first clss B/W in Well shaft

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2

Embedding 100mm C.I. rain water pipe non pressure I.S.I. Mark pipe in cement mortar during masonary work.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick CC 1:2:4 over 50mm thick CC 1:8:16

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on edge laid in CM 1:3 over 75mm CC 1:8:16 including 12.5mm CP 1:3

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed conforming to IS: 4985, including fixing with clamps:- U-PVC pipes 110 mm dia.

Providing and fixing UPVC bend for rain water pipe as per IS: 14735 including joints complete as per specifications

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. using mechanical mixer for mixing of material

Flat brick or tile flooring laid in cement sand mortor 1:4 on 100mm thick cment concret 1:8 :16 and 100mm thick sand filling and cement pointed 1:2 on top.

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).size 600x600

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

10mm thick Cement Plaster 1:3

Bearing plaster 10mm 1:4

12.5 m thick CP 1:3

12.5 m thick CP 1:4

12.5 m thick CP 1:5

12.5 mm th. CP1:6

20mm th. CP 1:3 on wall top

20 mm thick CP 1:4

20 mm thick CP 1:5

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

P&F MS stair case railing made out of MS sq bar 20mmx20mm as vertical post 0.70mm high fixed with MS base plate of 40x40mmx6mm & flat iron 40x6mm as hand rail

Cost of aluminium fittings for shutter area above 0.50 sqm

For fixed portion and chaukhats

For shutters of doors, windows &

Providing and fixing 12mm thick prelaminated

Providing and fixing glazing in aluminium door 5mm thick glass,

Providing and fixing double action hydraulic floor

P/F of hydraulic door closer ISI mark with nacessary screws,etc. complete 1ISI designation no.iii size of door 851 to 1000mm

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. B) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.

Compacting original ground below road crust (a) Loosening, leveling and compacting original ground up to a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications

Water Bound Macadam Grading II (i) Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications

Joint Sealing Compound (b) Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weight complete as per drawings and technical clause 2605 of MORT&H specifications

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete. 15mm1/2”dia G.I. pipe

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete.20mm 3/4” dia G.I. pipe

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete.25mm 3/4” dia G.I. pipe

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. i)1/2” dia (15mm) i/d pipe line

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. ii)3/4” dia (20mm) i/d pipe line

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. 20mm i/d Gun Metal peet valve heavy pattern.

Provo/ding, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the or inside buildings including all carriages complete. 25mm i/d Gun Metal peet valve heavy pattern.

Providing & fixing Cast Iron suface box for Peet Valve, Stop Cock including all carriages complete.

Cutting holes upto 23cm square thorugh B.B. in cement walls for pipes, and making goo/d including repointing, replastering and finishing according to existing finish where required through wall 22.86 cm thick

Providing, lowering, cutting & jointing salt Glazed Stone ware Pipes and Specials ISI marked as per IS 651-2007 class Sp-1 into Trenches for all depths and Laying out the same to correct alignment, Gradients, levels etc., In Trenches including all dressing and trimming of bed and sides of trenches, if required trimming and cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the urroundingbenching, haunching and envelopes are completed. The sewer shall rest on the bed at every point through-out its length and to ensure this, it shall be grouted in without extra charge by the contractor with 1:3 cement sand mortar including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best white italian pun yarn, finishing and trowelling of each joint at an angle of 45degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to niform finish to the entire satisfaction of engineer-incharge Including all cartage etc. 100i/d pipe

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required Through floor or roof 15.00cm thick

Excavation in open cutting or in streets and lanes for intramural sullage drains, extramural intercepting drains and outfall drains above top of drains cunnetes, storm ater channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineer-in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic, Providing and fixing and maintenance of ution boards, night signals, crossing over trenches for access to the houses, watching etc. and of removal of surplus spoil from the site of work including all lift and lead for depths to 2 metre below natural ground level upto 60 metres of length of lead in disposing surplus spoil. All classes of soil except rocky

Earth work in excavation in Foundations Trenches etc., for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, creening chambers and other similar works to full dimension and depth as shown on the drawings or as shall be required by Engineerin-charge, including dressing of ottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around Plinth/structures in 15 cms. layers with compaction including Disposal of surplus spoils as Directed within a lead of 30 Metres For all classes of soil except rocky.

Providing & fixing 560mm, 500mm and 450mm internal Diametre circular or 455 mm x 610mm clear inside opening rectangular cast iron manhole cover and frame ISI marked as per IS12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manholes including cement concrete copping (1:2:4)around the frame etc.Dia of steel for lifting hook is 16mm R.C.C. Manhole cover 500mm i/d Heavy duty

Providing & fixing 560mm, 500mm and 450mm internal Diametre circular or 455 mm x 610mm clear inside opening rectangular cast iron manhole cover and frame ISI marked as per IS12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manholes including cement concrete copping (1:2:4)around the frame etc.Dia of steel for lifting hook is 16mm R.C.C. Manhole cover Light duty Rectangular single/double seal pattern 450mm x 610mm clear inside opening

Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Extra for every 0.30 m depth of inspection chamber. 450mm x 450mm

Providing and fixing in position Chinaware Indian Orisa water closet sizes 580mm (to the approval of the Engineer-in-charge) suiteconsisting of 10 ltr. PVC flushing istern supported on angle iron bracket including cost of long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge.

P & F in position Chinaware Europeon type water closet P-trap or S-trap ( to be approved of the Engineer Incharge) suit consisting of 10 ltr PVC flushing cistern supported on angles iron brackets,short bend 32 mm dia i/c cost of solied white cover complete in all respect & to the entire satisfaction of engineer in charge

Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.

Extra for providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend.

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x265 mm C.P. brass flexible tube connection 450 mm long.

Extra for providing & fixing PVC 32 mm dia waste pipe up to floor level & plumbing joints

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall 2.8 mm thick upto floor level including cost of wipped solder joint etc. complete as required by the Engineer in charge.

Providing and fixing in position best Indian make chromium plated brass, Bottle trap 32mm dia with 40 mm seal of approved make(to the approval of Engineer Incharge) complete in all respect.

Providing and fixing in position best quality stainless steel sinks with complete fitting. Size 600 mm x 450 mm x 225 mm (Net size excluding flat edge)

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass rews, complete in all respects including cutting and making good the walls etc. C.P. brass towel Rails size 20mm dia 600mm long cp Acrylic

Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete ncluding cutting and making good the walls etc. C.P. brass Acrylic shelf size 560x130mm

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick hardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plugs embedded in the walls or chromium plated brass clamps with C.P. rass screws (as required by the Engineer-in- Charge) complete including cutting and making good the walls etc. Size 600mmx450mm

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge). C.P. brass Bib cock

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-incharge). C.P.brass 15mm stop cock Male and female

Providing & fixing in position best Indian make PVC flexible tube connection. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing and fixing in position Centrifugally cast iron soil waste vent or anti syphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. 100mm i/d Centrifugally cast iron pipe lines laid complete

Providing and fixing in position Centrifugally cast iron soil waste vent or anti syphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. 75mm i/d Centrifugally cast iron pipe lines laid complete

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. anufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. 100mm i/d (1.36 kg.)

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. anufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. 75mm i/d (1.13 kg.)

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a inimum seal 50mm. With 75mm i/d outlet shallow seal

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I pecifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 100mm internal dia HCI Heal rest bend

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I pecifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 100mm i/d Cowls

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I pecifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 75mm i/d HCI rest bend

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I pecifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 75mm i/d Collars

Providing & fixing in position HDPE water storage tanks triple layer make as approves by Engineer-in-Charge including hosting and carriage from store to site of work complete with providing and fixing 15mm or 20mm internal Diametre tanki nipple complete.(Excluding cost of platform). Triple layer tank

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and hamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerincharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring call bell point

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade

Wiring 3 pin 16/20 amp. power plug control and switch.

S/E & Wiring call-bell point in PVC insulated copper conductor single core cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).

PVC insulated copper conductor single core cable (ISI marked) overall 1.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade

PVC insulated copper conductor single core cable (ISI marked) overall 6 sq.mm, 1100volts grade twin core

Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) Flushed

Heavy gauge welded conduit pipe 32mm dia. (ISI marked 1.60mm thick) On Surface

Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Miniature circuit breaker double pole 50, 63amp. (Breaking capacity 10kA, Curve-C)suitable for 240/ 415 volts 50cycles AC supply

Miniature circuit breaker triple pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 12 way each

P & F of corrotive resistance (Acid vapour proof) completely enclosed type white stove enameled reflector fitting suitable for 2 Nos. 4’x40 walts flourscent tube the canopy made of fibres glass and bottom covered with clear transparent acrylic sheet of crompton Greaves/ Philips India/ Bajaj/Genelac i/c the catalogue No. type of the manfacture.

P & F of 20 Watt Tube set LED type Havells Make

P & F ceiling fans standard make 1400mm sweep with regulator . Bajaj ,Crompton/G.E.C./ Philips/ GEC/Khaitan make.

P & F of 18” dia 1440 RPM single phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj /Genelac/ Khaitan as per Technical specification No. 20. The contractor should specify the make.

P & F of 12” dia 1440 RPM single phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj /Genelac/ Khaitan as per Technical specification No. 20. The contractor should specify the make.

Supply & Fixing 15 Watt Panel Trim Havells round downliter LED type

Supply & Fixing ceiling light of 42 watt 2' x 2' fitting Havells make of LED type

Prov./Fixing 200 watt gate light posts/ lantern of Crompton Greeves / Bajaj/Equivalent

S & F general purpose tube fittings of crompton make on wall (ModelDIJB12414EB9) of 1x36 W

P/F steel nosing made of angle 30x30x3 mm with MS flat 15x4mm and 6mm dia bars

P/F steel nosing made of angle 50x50x3 mm welded with with MS flat 25x3mm 175mm long at 690 C/C staggered as per drawing

P/F steel nosing made of angle 50x50x6mm welded with with MS flat 40x6mm 150mm long at 1220 alternate

P/F of MS chequered plate 5mm thick

P/F of cable racks of angles various sizes according to drawings

Base Plates of 235x220x12mm under MS rails@900 c/c

Supply of MS cleats 65x65x6mm

P&F 12 x 300mm long anchor bolts

P&F MS rail weghing 44.64 kg or 90 lbs/ mtr

P/F angle iron posts 75x75x8mm (3.2mt long),50x50x6mm (3.12&2.6mtr. long)

P/F barbed wire fencing consisting of galvanized steel barbed wire having dia 2.24mm(2ply) barbed with 4 points as per IS 278/1962 i/c all fittings such as U-clamp tighting nuts and bolts unrolling and stretching complete as per DRG No. 3 Rs/Job No. 112/S and comfirming to IS-2721/1974 and 3459/1977 respectively.

P/F G.I. wire netting consisting of 12 gauge 50x50 mesh 180cms. High fastened with 4nos. M.S. wire rope 6/7 strand 1/16" dia each complete in all respects as per Drg. No. HW/TB-5635R-2 and Arch Drg. no. 3 Rs/job No. 112/S and confirming to IS-2721/1974 and 3459/1977 respectively.

Painting 2 coats of aluminium paint

S/H of ferrocement trench coversT-1& T-2 (2'-8"x1'-6")

S/H of ferrocement trench coversP-type ,Z- type (x,y,z)(3'-4"x1'-6")

S/H of ferrocement trench coversT-3 type(2'-2"x2'-2")

S/H of ferrocement trench coversT-4 type(1'-99"x2'-6"

P& F of HCI gratings 150mmx150mm

P/F manhole cover 500 dia with frame

Painting one coat with aluminium paint on old work to given evenshade

S&F steel gate G-2A ( 5.8 mts) as per drg. No 4, JOB-S/ARCH.-68

Painting two coats with aluminium paint

supplying,assembling,lowering and fixing in vertical position in bore well unplasticized PVC medium wellscreen RMS pipe 125mm o/dia

P/F foot rest for well shaft made of 20x20mm square bars i/c fixing in man hole/well shaft

Extra for fixing double flanged (a) 80mm internal dia.

Boring with 150mm dia casing pipe for tube well in all kinds of soilsexcept ordinary hard rocks requiring blasting including removind the casing pipe after the hand pipe/tube well is lowered and tested Upto150mtr. Depth below G.L.

Disposal of surplus soil

Boring 75 mm dia 0.00-15.00 mtr- 15-30m

Fixing steel MS Flat 100x12mm length

Cost of 32 mm dia Electrodes including bending binding and placing complete in all respects

Welding by gas or by neletric plant,i/c carrige to and from workshop,etc.

Painting two or more coats with anti corrosive bitumastic paint to give an even shade

Providing & fixing RCC manhole cover light weight 500mm i/d

P & F CI pipe 75mm dia

P/F CI cowl 75mm dia

P/F of U/C fencing gate 1m wide for station T/F

P&F of 110mmo/d PVC pipe of 4kgf/sqcm for vent

P&F of man hole cover of 0.65x0.65m

Structural steel work in angles.tees,flats etc rivetted or welded in/c cutting fixing all gusset plates bolts, nuts complete with hoisting for roof trusses

P/F GI sheet of TATA make Durashine complete as pr specifecations

Compaction Extra for rolling to specifications

P/L of 60mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish vibratory process and of app. Size and design complete as per directions of engg. Incharge.

P/L factory made smooth finish Precast cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing nmwith cement mortar 1:2 as per MORT&H specifications

P/L factory made rubber moulded smooth finish cement concrete channel M-20 grade 300mm wide and75mm thick made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specification

Landing Rate including Extra carriage and Difference of rate of Crusher 13.2/12

Landing Rate including Extra carriage and Difference of rate of Crusher 11.2/10

Landing Rate including Extra carriage and Difference of rate of Stone Metal

Landing Rate including Extra carriage and Difference of rate of Coarse Sand

Extra carriage of Fine Sand

Landing Rate including Extra carriage and Difference of rate of Bricks

Extra carriage of Cement

Extra carriage of STEEL

Landing Rate including Extra carriage and Difference of rate of Stone ballast

P&F of 1HP submr pump cromptongreaves make complete in all respects

P&F of non clog pump of 3BHP 3 phase of crompton make

Earth filling in station with proper earth including extra for compenstation & royalty for ordinary earth/ordinary clay taken from private land without royalty, layering of earth, compaction in layers, loading& unloading &watering complete as per spections of Engineer- In- charge

PCC flooring 1:5:10

Cement slurry

Brick Edging

Gravel Spreading

Flooring around transformer

Providing & Fixing wire mesh of 22 Guage 12mm 12mm in aluminium door

Fixing of template

20 mm thick vertical DPC of CP 1:3

Recovery of trees

Dismentlement of CI Rain water pipe 4" dia

Dismentlment of PCC Lime concrete, cement concrete of 1:6:12 or leaner mix

Dismantling brick work tile, masonry or tile lining in cement

Dimantling concrete 1:2:4

Dismantling RCC

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.

Disposal of malwa upto 1 km

Scraping Bricks dismantled from brick work in lime or cement.

Scraping Tiles dismantled from the work in lime or cement

Recovery of Rain water CI 100 dia pipe

Recovery of Air pipe for sewer CI 75 mm dia

Recovery of GI pipe of all sizes

Recovery of bricks

Recovery of brick bats

Recovery of Old & dismentled tiles from roof

Recovery of steel

Recovery of doors

Recovery of gate

Recovery of MS flat

Recovery of 10mm sq bar

Bidder Name

Amount in Words

M/s Pankaj Jindal Contractor (BID ID -604065)

TARSEM KUMAR CONTRACTOR (BID ID -604410)

Chechi Construction Co. (BID ID -600609)

DHALIWAL BUILDERS (BID ID -604423)

ASC BUILDERS PVT. LTD. (BID ID -603979)

M/s Khara Contractors (BID ID -604366)

MS RAKSHA CONSTRUCTION CO. (BID ID -602922)

M/s M S BUILDERS (BID ID -604391)

PAUL AND COMPANY (BID ID -604066)

L. S. CONTRACTOR (BID ID -604275)

M/s Khara Contractors (BID ID -604366)

TARSEM KUMAR CONTRACTOR (BID ID -604410)

DHALIWAL BUILDERS (BID ID -604423)

L. S. CONTRACTOR (BID ID -604275)

ASC BUILDERS PVT. LTD. (BID ID -603979)

PAUL AND COMPANY (BID ID -604066)

M/s Pankaj Jindal Contractor (BID ID -604065)

MS RAKSHA CONSTRUCTION CO. (BID ID -602922)

Chechi Construction Co. (BID ID -600609)