SYSTEM TENDER NO NIT NO: 96/S.E.E/M Raipur /2026-27 Dated:.2909-2026

Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board including drilling holes on the board, screws, connections etc. as per specification. (Thimbeling shall be paid separately). 7.11.4 100 amps

Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as per specification.

Supplying and fixing G.I. pipe along with wall or pole/ support with 2 Nos MS clamps for protection of under ground cable in approved manner including bolts and nuts or metal dash fasteners complete as per specification.

40 mm dia

Supply of "H" beam steel pole as per IS specifications in standard length for over head line work: 19.1.2 "H" beam steel pole 152x152x7x12 mm standard weight 37.1 kg /metre

Supply of steel R.S. JOIST as per IS specifications in standard length for over head line work: 19.2.2 Designation ISMB175 size 175x90x8.6x5.5mm weight 19.3 kg /metre

Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 19.10.4 7 metre to 10 metre

11 metre to 12 metre

13 metre to 14 metre

Erection of steel tubular or "H beam POLE STRUT in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and securing with holding clamps, bolts and nuts etc. as per specification:

Supply and fixing following overhead line accessories. 20.1.1 tay rod (19/20mm dia 1.8 metre long) with anchor plate 300x300x6.4mm in CC

Stay wire 7/4.0mm dia

Stay wire 7/3.15mm dia

MV Strain insulator

Bow tightener

MV Shackle insulator 75x90mm with G.I. bolts and nuts

DC cross arm made of MS channel 100x50x5 mm @ 9.56 kg/m

Supplying and erection of stay set complete (galvanized) with 19/20mm dia x 1.8 metre long stay rod, anchor plate of size 300mm x 300mm x 6.4 mm, thimble stay clamps, turn buckle (19/20mm x 600mm), strain insulator and specified G.I. stay wire etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as per specification. 20.2.1 With 7/4.00 mm dia G.I. stay wire

With 7/3.15 mm dia G.I. stay wire

Supplying and erection of angle/channel iron cross arms/ bracket/ other fitting of approved size and shape including drilling of holes for insulator pins, bolts and nuts etc as per specification.

Supplying and erection of shackle insulator with G.I. bolts, nuts and straps etc. as per specification. 20.11.1 Size 75mm x 90mm

Supplying and fixing guard insulator or split insulator complete 20.15.1 25x25 mm

Supplying and erection of MV horn gap lightening arrester.

Supplying and erection of 11 KV gang operated air break switch on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supplying and erection of 11 KV D.O. fuse unit on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supplying and erection of 33 KV gang operated air break switch on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supplying and erection of 33 KV D.O. fuse unit on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supplying and erection of G.I wire of size 8 SWG to 4 SWG including binding etc. as per specification.

Supply and erection standard ACSR (aluminium conductor steel reinforced) confirming to IS 398-1961 of approved make at existing insulator at height upto 14m from ground level including stringing, binding with insulator, jointing wherever required, jumpering, tearing off connection etc complete etc. as per specification including clearing off obstacle if any: 20.32.1 Squirrel 6/1/2.11mm dia with calculated aluminium area 20.98 sq.mm, weight 85 kg/ km (50 amps)

Weasel 6/1/2.59mm dia with calculated aluminium area 31.61 sq.mm , weight 128 kg/ km (80 amps)

Rabbit 6/1/3.35mm dia with calculated aluminium area 52.88 sq.mm, weight 214 kg/ km (100 amps)

Dog 6/4.72(AL), 7/1.57(S) mm dia with calculated aluminium area 105 sq.mm , weight 394 kg/ km (248 amps)

Supplying and erection DANGER BOARD made MS sheet duly painted and maked as per IE rules and specification.

Supply and errection of following Polymer Insulator with G.I. Bolt, Nuts and Straps etc. as per specification. 20.34.3 11 KV Disc Insulator

33 KV Pin Insulator with Pin

11 KV Pin Insulator with Pin

Dismantling of angle iron board/ cubical panel including repairing the wall, shifting of dismantled material to department store. (front area to be measured)

Dismantling of steel pole, R. S. joist, girder pole from the cement concrete foundation with bracket, insulators, stay wires etc, refilling the pit upto ground level including shifting of dismantled material to department store.

Dismantling of stay set from the cement concrete foundation, refilling the pit upto ground level including shifting of dismantled material to department store.

Earth work in hard rock (without blasting) with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling with excavated soil in trench / pit to ground level complete as per specification

Providing and laying Cast-in-situ cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm including mixing with mechanical mixer, compacting with vibrator, finishing and currying etc. complete but excluding form work.

Painting new steel and other metallic surface with red oxide zinc chromide primer paint complete with supply of material labour etc. including preparation of surface.

Painting wood steel and other metallic surface with Aluminium Paint complete with material and labour including preparation of surface.

Supplying and fixing of Strain Plate (50x6 mm) for 11 kV as per REC specifications.

Supplying and fixing of Aluminium binding wire and tape as per REC specifications.

Supplying and fixing of M.S. Stay Clamp (50 mmx6 mm) and 246 mm length between 2 nos 18 mm dia holes for 16 mm bolts as per REC specifications.

Supplying and fixing of Earthing Coil (Coil of 115 turns of 50 mm dia. & 2.5 Mtrs lead of 4.0 mm GI wire) (EARTHING COIL 8SWG GI WIRE 50 MM DIA 450MM height) as per REC specifications.

Supplynig and fixing of m.s. Nuts and bolts of verious sizes 16x200 mm / 16x250 mm/ 16x300mm/ 20x75 mm/ 20x90 mm/ 20x110mm/ 24x120mm/ 16x100mm/ 16x140mm/ 16x160mm as per REC specifications.

Supplynig and fixing of m.s. Nuts and bolts of verious sizes 16x65 mm / 16x90 mm as per REC specifications.

Supplynig and fixing of m.s. Nuts and bolts of verious sizes 12x65 mm / 12x100 mm / 16x40 mm as per REC specifications.

Supplying and fixing of I BOLT M 20X128MM THREAD PORTION 50 MM as per REC specifications

Supplying and Fixing of 11 kV MS V Cross Arm angle type 65x65x6 mm Weighing 11.48 Kg 1150 mm long with 18 mm dia hole for pole back clamp and 22 mm dia hole for pin insulator including drilling of holes for insulator and clamping with nuts and bolts but excluding insulator, clamp,nuts and bolts etc as per REC specifications.

Supplying and fixing of 11 kV m.s. Top Clamp Angle type 65x65x6 mm 385 mm long as per REC specifications.

Supplying and Fixing of 11 kV m.s. "V" Cross Arm Cleat type 75x40x6 mm. 1150 mm long with 18 mm dia hole for pole back clamp and 22 mm dia hole for pin insulator including drilling of holes for insulator and clamping with nuts and bolts but excluding insulator, clamp,nuts and bolts etc as per REC specifications.

Supplying and Fixing of Transformer mounting m.s. cross arm DC channel 100x50x6 mm, 2.4 mtr long 8' centre as per REC specifications.

Supplying and Fixing of m.s. D.C.Cross arm 4' Centre 100x50x6 mm Channel 2 Nos, 1.2 mtr long as per REC specifications.

Supplying and Fixing of D.O. / LA Mounting M.S. channel 75x40x6 mm, 2800 mm long as per REC specifications.

Supplying and Fixing of Single Pole m.s. Cut Point Fitting 100x50x6 mm, 1800 mm long (11 kV Cut point channel) as per REC specifications.

Supplying and fixing of 11 KV Strain hardware fittings. (Strain H/W up to Rabbit.) as per REC specifications.

Supplying and Fixing of L.T. Distribution Box for 63 kVA X'mer (200 A, isolator & 6 SP MCCB of 100 A) as per REC specifications.

Supplying and Fixing of SMC LT Distribution Box for 100 kVA Distribution Transformer (200 A, isolator & 6 SP MCCB of 200 A) as per REC specifications.

Supplying and fixing of 33 kv MS V cross arm of size 75x75x6 mm weighing 25.7 kg including drilling of holes for insulator and clamping with nuts and bolts but excluding insulator, clamp,nuts and bolts etc as per REC specifications.

Supplying and fixing of 33KV top clamp (33 kV Top m.s. angle 65x65x6 mm, 5.8 kg/m with two nos. 16 mm dia hole for fixing of back clamp. and m.s. channel 100x50x6.4 mm, 65 mm long welded with angle with 20 mm dia hole for pin insulator.) as per REC specifications.

Supplying and Fixing of G.I. WIRES: - Barbed wire 4mm 8 SWG confirming to IS:2781978 as per REC specifications.

Supplying and fixing MS LT 5 pin cross arm size 50x50x6 mm, weighing 10.03 kg including drilling of holes for insulator and clamping with nuts and bolts but excluding insulator, clamp,nuts and bolts etc as per REC specifications.

Supplying and fixing of Aluminium bobbin(Earth knob) as per REC specifications.

Supply and Fixing Universal distribution connector as per REC specifications.

Supplying and Fixing of Distribution box 3 phase 5 connectors along with 2 Nos. Steel Strap & Buckles as per REC specifications.

Supplying and Fixing of Single phase Distribution box for 9 connections along with 2 Nos. Steel Strap & Buckles as per REC specifications.

SUPPLYING AND FIXING OF ALUMINIUM CABLE 1C 16 SQ MM UNARMOURED LT PVC as per REC specifications.

SUPPLYING AND FIXING OF ALUMINIUM CABLE 1C 70 SQ MM UNARMOURED LT PVC as per REC specifications.

SUPPLYING AND FIXING OF ALUMINIUM CABLE 1C 150 SQ MM UNARMOURED LT PVC as per REC specifications.

Supplying and Erection of PCC Pole 9.0 Mtr long 200 Kg, top cross section 115mm x 105mm bottom cross section 315mm x 105mm (coforming to IS 1678-1998) including fixing of EARTHING COIL size 8 SWG GI wire but Excluding earthing coil as per REC specifications.

Supplying and Erection of PCC Pole 11 Mtr long 365 Kg, top cross section 225mm x 100mm bottom cross section 395mm x 100mm (coforming to IS 1678-1998) including fixing of EARTHING COIL size 8 SWG GI wire but Excluding earthing coil as per REC specifications.

Supplying and fixing of Insulating Piercing connector for AB cable suitable for 95- 16 sqmm to 10-2.5 sqmm. for street light and service connection as per REC specifications.

Supplying and Fixing of Suspension clamp assembly (consisting of GI Pole Clamp, GI Flat type I-hook & Nylon Cable tie) as per REC specifications.

Supplying and Fixing of Anchor clamp assembly (consisting of GI Pole Clamp, GI Flat type I-hook & Nylon Cable tie) as per REC specifications.

Supply and Fixing of Straight through joints for LT AB cable all size as per REC specifications.

Supplying and Fixing of LT 3 phase 5 Wire Aerial Bunched Cable Confirming to IS 14255/1995 where phase conductors with XLPE insulation (Conforming to IS 8130:1984) with bare messenger cable(Conforming to IS 398(partIV):1979) of Size 3X25(Phase)+1X16(st light)+1x25(bare messenger) as per REC specifications.

Supplying and Fixing of AL Jointing sleeves for Weasel, Squirrel & Rabbit Conductor as per REC specifications.

Supplying and Fixing of AL Jointing sleeve for Dog Conductor as per REC specifications.

Supplying and fixing of 11 kV M.S. Guarding Channel 100x50 mm 2210 mm long (1.1 MTR DPDC CROSS ARM) with 6 nos 18 mm dia holes for fixing of 16 mm Eye bolt and back clamp as per REC specifications.

SUPPLYING AND FIXING MS LT SIDE BRACKET 5 PIN 50X50X6 MM, 23.72 KG INCLUDING DRILLING OF HOLES FOR INSULATOR AND CLAMPING WITH NUTS AND BOLTS BUT EXCLUDING INSULATOR, CLAMP,NUTS AND BOLTS ETC AS PER REC SPECIFICATIONS.

SUPPLYING AND FIXING MS DC CROSS ARM (3.8 M) 8 FEET CHANNEL 100X50 MM, 79.0 KG/SET INCLUDING DRILLING OF HOLES FOR INSULATOR AND CLAMPING WITH NUTS AND BOLTS BUT EXCLUDING INSULATOR, CLAMP,NUTS AND BOLTS ETC AS PER REC SPECIFICATIONS.