Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC 475 OPP DAMAN GANGA COLONY GAYTRI MANDIR ROAD AMLI SILVASSA 396230 U T OF D NH | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396230 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.0 L+₹1.5 L (4.02%)Rejected-AOC 475 OPP DAMAN GANGA COLONY GAYTRI MANDIR ROAD AMLI SILVASSA 396230 U T OF D NH | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396230 | L2 | Rejected-AOC L2 |
Tender Value
₹29.0 L
EMD Value
₹58,500
Closing Date
31 Aug 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer-I(Bldg),PWD,WD,DNH,Silvassa
PWD Campus Block No. I (Bldg), DNH, Silvassa
Special repairs to Yatri Niwas building at Silvassa
2023_UTDNH_6672_1
E-TENDER NOTICE NO. 20 OF 2023-24 (BLDG)
Open Tender
Civil Works - Buildings
Item Rate
90 days
UT OF DNH
As per NIT refer
3 documents required · 3 mandatory
₹500
Executive Engineer-I(Bldg),PWD,WD,DNH,Silvassa
₹58,500
12 Sept 2023
25 Aug 2023
31 Aug 2023
25 Aug 2023
31 Aug 2023
25 Aug 2023
Amount
Finishing wall with weather proof exterior emulsion paint of Asian Apex Ultima or equivalent on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete as directed.
Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.
Providing material and labour for Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thorooughly brushing the surface free from mortar dropping and other foreign matter and sand papred smooth
Providing material and labour for Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papred smooth
Providing material and labour for Painting two coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.
Providing material and labour for Painting three coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
Providing material and labour for 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) for finishing with a floating coat of neat cement slurry.
WATER PROOFING TREATMENT : Cleaning existing Terrace Surface, Providing and laying Waterproofing Treatment in DOUBLE LAYER to Terrace with APP (Atactic Polypropylene polymer) Modified Pre-Fafabricated Five layer Water proofing Membrane, HYDROSTOP of TIKIDAN , Asian or equivalent make, comprising of 1st layer of 3mm thick and Minimum 3.5 Kg / m2 Weight Membrane HYDROSTOP 3 FGP, Upper and bottom surface finished in plastic Polyethylene Film and having Reinforcement of Fibre Glass at Core and 2nd Layer of 3mm Thick and Minimum 3.5 kg/m2 Weight Membrane HYDROSTOP 3 PYM, Upper surface finished in Minerals and Bottom surface finished in plastic Polyethylene film and having reinforcement of Non Woven polyester Matt at core, including a coat of bitumen primer TIKI PRIME S for Bitumen Membranes Manufactured to IS : 3384. Over the dried Primer Coat, Laying APP Membrane HYDROSTOP in DOUBLE LAYER using Butane Torch, the 1st Layer torch Bonded to the Primed Surface followed by Torch Bonding of 2nd Layer to the first, while maintaining the side Overlaps 100mm and END Overlaps 150mm, sealing all overlaps etc. complete, including treatment at all juctions and corners to accomodate stresses with 300mm Wide strips of 3mm HYDROSTOP 3 PYP and treatment over the Vertical Plane upto 200 mm height above the Finished Floor level with 3mm APP Membrane HYDROSTOP 3 PYM, the Waterproofing Membrane terminated by tucking it into the groove made on Vertical Plane, the groove sealed with cement : Sand Mortar, etc. all complete.
Providing material and labour for 24" x 24" vitrified 8 mm thick tile flooring over 20mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit
Providing material and labour for construction of Kitchen Platform made from Black Granite (16mm to 18mm thick) in top of kitchen platform rested on black kadapa stone (av.30mm thick) supported on sandwiched vertical supports of Kadapa Stone bottom of granite stone for base of platform, at required distance or as directed by Engineer-in-charge. One side vertical granite stone in geometrical shape, front granite stone patti for fascia work as well as horizontal boarders including moulding and mirror polishing by hand grinder to all exposed black granite edges and The vertical supports of kadapa stone sandwiched/ gap fill up with cement mortar 1:1 and cement slurry and the granite stone vertical side and patti etc with adhesive material like Araldite etc complete as directed by Engineer-in-charge.
Providing material and labour for Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade
Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood
Providing material and labour charge for fixing Powder coating Alluminium WINDOW TWO TRACK with bottom top frame @ wt. 0.695 kg/mt and vertical track frame 61.85 x 31.75 x 1.30 mm wt. 0.659 kg/mt including window section – inter lock, bearing bottom and alluminium Handle section size 38 x 18 x 1.63 mm with 0.56mm mosquito net gasket and heavy bearing on bottom side with locking arrangement and other fixture and fastening etc. complete as directed by Engineer in charge.
Appliying wax polish on previously wax polished wood and wood based surface with bees wax polish in proportion of 2:1.5 :1:0.5 (2-Bees wax : 1.5 Linseed oil : 1- Turpentine : 0.5 varnish by weight to give an even surface including cleaning the surface of all dirt dust and sand papered smooth.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.etc complete as directed by engineer-in-charge.
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
Providing material and labour for laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional
Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift
Providing material and labour for 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete
Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour
Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour
Providing material and labour for making BLACK GRANITE STONE COUNTER WASH BASIN of 0.60mt wide with vertical & Horizontal support of granite stone and having bottom Slab of 25mm to 30mm thick kadappa stone fixing with cement mortar 1:4 ( 1 cement :4 fine sand) and neat cement slurry as per requirement including cutting the granite stone & Providing & fixing oval shape wash basin of 22” x 16” size white colour in line & level. All exposed Edges of granite should be moulded including all accessories like pillar cock(swan neck type), flexible inlet pipe 15mm dia, C.P brass waste coupling 32mm, PVC waste pipe 32mm etc. as directed by engineer in charge.
Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.
Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (C) with oval conduit /PVC casing capping double lock type (b) 2 wire 2.5 sq. mm
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm
Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]
Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.
S K PARMAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .