Repair to Sub-Treasury Building at R.Udayagiri for the year 2026-27_Building

Earth work in ordinary soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth asper direction of the Engineer-in-charge.

Dismentaling and removing cement concrete including stacking the useful materials for reuse and removing the debris with in 50mtr lead includingcost of all labour with T&P,Cess required for the work etc complete as per direction of Engineer-in-Charge.

Removing Old grading plaster from roof slab,cleaning the surface, lowering & removing the debries within 50m lead including cost of all labour, Cess T&P required for the work etc. complete as per direction of EIC

Providing Marble tile flooringusing (above 0.10sqm size& upto 0.40Sqm.)) floor tiles fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of tiles watering & curing for 7 days with cost, conveyance,royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges of all materials & labour T&P and Cessrequired for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge.

Cement concrete of proportion (1:2:4) using 12mm (1/2") size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where necessary ramming and levelling cruing dewatering with cost conveyanceand royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour of all materials including hire and running charges of machineries T&P required for the work with Cess etc, complete as per specification and direction of Engineer-in-charge.

Providing cement concrete (1:11/2:3) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering if neCessary with cost, conveyanceroyalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and Cess as per the specification and direction of Engineer-in-charge.

Providing HYSD bar reinforcement for R.C.C. work including Straightening,Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors (weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-Charge.

1st class Fly ash brick masonry in cement mortar (1:6) in super structure using clamp burnt bricks of 9inch size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge.

12mm (1/2") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess etc, complete in all floors as per direction of Engineer-in-charge.

Wall Priming one coat over wall surface with approved primer to give an even shade including cost of primer, labour & materials etc complete in all respect as per specification and direction of the Engineer-in-charge.