CONSTRUCTION OF CIRCLE INSPECTOR OFFICE CUM RESIDENCE AT KESARIYA POLICE STATION IN THE DISTRICT OF (MOTIHARI) WEST CHAMPARAN - WITH ELECTRIFICATION

Name of Work CONSTRUCTION OF CIRCLE INSPECTOR OFFICE CUM RESIDENCE AT KESARIYA POLICE STATION IN THE DISTRICT OF (MOTIHARI) WEST CHAMPARAN - WITH ELECTRIFICATION Estimated Cost in Rs. 9752918 09 Months

Sl No. Items Requirement

Name of the contractor

Address of the contractor

1 Earnest Money (A) As prescribed in Tender document duly pledged in Favour of EE Motihari Division

Bid Security Amount - Rs.

2 Character Certificate No. with Issue date.

3 VAT Registration No.

5 Average Annual Financial Turnover of Last Three Years

6 Experience of doing work of similar nature

7 Details of Engg. Set up for successful completion of work

8 Details of Tools & Plants

9 Details of Financial availability through Bank and/or self

10 Necessary Undertakings

11 Bidding Capacity (Provide the Amount)

12 Timely Completion (Certificate of the Concerned Executive Engineer)

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer Work Circle-01

BILL OF QUANTITY FOR THE CONSTRUCTION OF CIRCLE INSPECTOR OFFICE CUM RESIDENCE AT KESARIYA POLICE STATION IN THE DISTRICT OF (MOTIHARI) WEST CHAMPARAN

Building Portion

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 7.54 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 7.54 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.799 287.3

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 7.185 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

5 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 48 57.16 Rs. Fifty Seven And Sixteen Paise Only

6 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 0.399 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

7 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 0.600 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

8 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 0.400 404.7 Rs. Four Hundred Four And Seventy Paise Only

9 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 0.800 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

10 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 0.000 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

11 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 0.000 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

12 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 0.399 94.5 Rs. Ninety Four And Fifty Paise Only

13 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 0.399 92.6 Rs. Ninety Two And Sixty Paise Only

14 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 0.799 90.8 Rs. Ninety And Eighty Paise Only

15 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 0.200 91.7 Rs. Ninety One And Seventy Paise Only

16 5.22.7E Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 20 mm dia. KG 0.599 91.7 Rs. Ninety One And Seventy Paise Only

17 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 0.000 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

18 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 0.000 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

19 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

20 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 0.999 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

21 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 0.199 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

22 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 0.000 723 Rs. Seven Hundred Twenty Three Only

23 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly. plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. but excluding carriage cost of bricks, sand and jhama metal. Per M 0.000 1087.9 Rs. One Thousand Eighty Seven And Ninety Paise Only

24 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including stainless steel butt hinges with necessary screws. Sq.m 48.5 2845.6 Rs. Two Thousand Eight Hundred Fourty Five And Sixty Paise Only

25 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 778.37 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

26 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 25 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

27 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 50 111.4 Rs. One Hundred Eleven And Fourty Paise Only

28 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 50 57.1 Rs. Fifty Seven And Ten Paise Only

29 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 25 60.8 Rs. Sixty And Eighty Paise Only

30 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 57.87 9471 Rs. Nine Thousand Four Hundred Seventy One Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

31 10.14.1 Providing and fixing T-iron frames for doors. windows and ventilators of mils steel Tee-sections, joints miltred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concerete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including. KG 448.33 110.4 Rs. One Hundred Ten And Fourty Paise Only

32 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 16 165.4 Rs. One Hundred Sixty Five And Fourty Paise Only

33 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 0 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

34 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 182.95 546.8 Rs. Five Hundred Fourty Six And Eighty Paise Only

35 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate Sq.M 0.400 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

36 11.6.1 Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement : 18 mm thick Sq.M 47.56 304.15 Rs. Three Hundred Four And Fifteen Paise Only

37 11.19.2 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Medium shade using 50% white cement and 50% ordinary cement. Sq.M 0.999 985.4 Rs. Nine Hundred Eighty Five And Fourty Paise Only

38 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4: 20 to 25 mm thick. Sq.M 0.200 1252.7 Rs. One Thousand Two Hundred Fifty Two And Seventy Paise Only

39 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm. Sq.M 41.305 1334.9 Rs. One Thousand Three Hundred Thirty Four And Ninety Paise Only

40 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 0.399 795 Rs. Seven Hundred Ninety Five Only

41 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 16.925 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

42 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 0.599 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

43 11.73 + 13.57.1 Providing designation 100A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.including flush pointing on brick flooring with cement mortar 1:3( 1cement: 3 coarse sand). Sq.M 75.98 537.5 Rs. Five Hundred Thirty Seven And Fifty Paise Only

44 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 28 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

45 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 2 190.7 Rs. One Hundred Ninety And Seventy Paise Only

46 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 4 132 Rs. One Hundred Thirty Two Only

47 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 4 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

48 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 56 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

49 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 0.599 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

50 13.13.1+ 13.26 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) : neat cement punning. Sq.M 9.6 268.1 Rs. Two Hundred Sixty Eight And Ten Paise Only

51 13.13.1+ 13.36.5+ 13.26 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) :Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20mm cement plaster 1:3 (1 cement : 3 sand) including neat cement punning Sq.M 0.999 280.9 Rs. Two Hundred Eighty And Ninety Paise Only

52 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 0.800 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

53 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 0.800 137 Rs. One Hundred Thirty Seven Only

54 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 0.800 102.3 Rs. One Hundred Two And Thirty Paise Only

55 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 0.399 105.4 Rs. One Hundred Five And Fourty Paise Only

56 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 0.399 84.5

57 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete,including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap): 300 mm dia piles. M 157.32 902.6 Rs. Nine Hundred Two And Sixty Paise Only

58 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.199 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

59 Extra cost of slag cement Tirhut Zone Per bag 1328 10.34 Rs. Ten And Thirty Four Paise Only

60 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.199 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

61 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.800 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

62 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 0.399 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

63 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 92.55 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Fifty Three Lakh Twenty Four Thousand Nine Hundred Sixty Four Only

Numbers of item 63 (Sixty three)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

Sanitary 90 Cft Septic Tank 2 No. & 4'-0" dia Soak pit- 2 nos

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 22.05 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.000 3998.1

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.89 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 63 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 7.73 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 1.34 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 8.18 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 20 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 4.5 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.1.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia PVC Coupler Each 2 79.8 Rs. Seventy Nine And Eighty Paise Only

11 12.79.1.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia PVC Coupler Each 2 120 Rs. One Hundred Twenty Only

12 12.79.3.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75 x 75 x 75mm dia Single Jn Tee with door Each 1 141.6 Rs. One Hundred Fourty One And Sixty Paise Only

13 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 1 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

14 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 2 190.7 Rs. One Hundred Ninety And Seventy Paise Only

15 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 2 91.8 Rs. Ninety One And Eighty Paise Only

16 12.79.5.1+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm Floor trap Each 2 139.7 Rs. One Hundred Thirty Nine And Seventy Paise Only

17 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 2 132 Rs. One Hundred Thirty Two Only

18 12.80.1 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 75mm dia clip Each 6 184.1 Rs. One Hundred Eighty Four And Ten Paise Only

19 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 6 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

20 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 14.57 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

21 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 26.77 203.6 Rs. Two Hundred Three And Sixty Paise Only

22 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 7.4 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

23 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 6 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

24 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 1 4230 Rs. Four Thousand Two Hundred Thirty Only

25 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 7 3723.2

26 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.brass pillar tap Each 5 2135.8 Rs. Two Thousand One Hundred Thirty Five And Eighty Paise Only

27 17.10.2.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm Each 1 2812.9 Rs. Two Thousand Eight Hundred Twelve And Ninety Paise Only

28 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 12 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

29 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe M 10 410.7 Rs. Four Hundred Ten And Seventy Paise Only

30 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 4 310.9 Rs. Three Hundred Ten And Ninety Paise Only

31 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 1 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

32 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

33 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 3.03 1146.4 Rs. One Thousand One Hundred Fourty Six And Fourty Paise Only

34 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.000 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

35 Extra cost of slag cement Tirhut Zone Per bag 29 10.34 Rs. Ten And Thirty Four Paise Only

36 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 5.65 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

37 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 3.97 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

38 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 3.01 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

Rs. Two Lakh Twenty Two Thousand Five Hundred Fifty Two Only

Numbers of item 38 (Thirty eight)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 4 1068.5 Rs. One Thousand Sixty Eight And Fifty Paise Only

2 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 4 713.3

3 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 4 146.3 Rs. One Hundred Fourty Six And Thirty Paise Only

5 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Each 4 424 Rs. Four Hundred Twenty Four Only

6 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 8 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

7 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 7.2 350.8 Rs. Three Hundred Fifty And Eighty Paise Only

8 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 15 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

9 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 7.5 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

12 18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Each 10 303.8 Rs. Three Hundred Three And Eighty Paise Only

13 18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Each 10 303.8 Rs. Three Hundred Three And Eighty Paise Only

15 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 10 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

82 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore Each 2 589.9 Rs. Five Hundred Eighty Nine And Ninety Paise Only

90 18.19.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore:Horizontal Each 2 506.6 Rs. Five Hundred Six And Sixty Paise Only

92 18.19.2.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Horizontal Each 2 677.6 Rs. Six Hundred Seventy Seven And Sixty Paise Only

17 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Each 1 190.1 Rs. One Hundred Ninety And Ten Paise Only

18 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 2000 9.7 Rs. Nine And Seventy Paise Only

Rs. Fifty Five Thousand Eight Hundred Eleven Only

Numbers of item 18 (Eighteen)

Boring P.V.C.pipe- DEEP TUBEWELL 300mmx150mmx106.68m

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS AMOUNT

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9 Rs. Five Hundred Sixty Seven And Ninety Paise Only

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 0.000 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. One Lakh Seventy Seven Thousand One Hundred Fifty Two Only

Numbers of item 11 (Eleven)

Compound Wall 280 Rft

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 20.53 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.999 287.3

3 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 42.03 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

4 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 6.23 404.7 Rs. Four Hundred Four And Seventy Paise Only

5 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 28.16 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

6 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 254.36 94.5 Rs. Ninety Four And Fifty Paise Only

7 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 339.15 92.6 Rs. Ninety Two And Sixty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 254.36 90.8 Rs. Ninety And Eighty Paise Only

9 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 5.09 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

10 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 2.14 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

11 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Cu.m 0.78 5677.2 Rs. Five Thousand Six Hundred Seventy Seven And Twenty Paise Only

12 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 10.46 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

13 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 208 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

14 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 13.48 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

15 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 150.19 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

16 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 150.19 137 Rs. One Hundred Thirty Seven Only

17 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 43.49 84.5 Rs. Eighty Four And Fifty Paise Only

18 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.999 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

19 Extra cost of slag cement Tirhut Zone Per bag 86 10.34 Rs. Ten And Thirty Four Paise Only

20 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

21 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.999 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

22 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 0.999 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

23 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.999 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Total of 100 Rft

Total of 280 Rft

Rs. Nine Lakh Six Hundred Eleven Only

Numbers of item 23 (Twenty three)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 4.53 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 8.83 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.45 287.3

4 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 9.77 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

5 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 0.000 404.7 Rs. Four Hundred Four And Seventy Paise Only

6 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 11.78 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

7 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 0.999 94.5 Rs. Ninety Four And Fifty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 213.24 90.8 Rs. Ninety And Eighty Paise Only

9 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 94.42 91.7 Rs. Ninety One And Seventy Paise Only

10 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 0.94 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

11 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 0.31 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

12 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 768 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

13 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.51 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

14 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 11.78 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

15 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 11.78 137 Rs. One Hundred Thirty Seven Only

16 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 18.12 84.5 Rs. Eighty Four And Fifty Paise Only

17 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.000 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

18 Extra cost of slag cement Tirhut Zone Per bag 11 10.34 Rs. Ten And Thirty Four Paise Only

19 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

20 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.67 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

21 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 1.86 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

22 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.5 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. One Lakh Fifty Four Thousand Five Hundred Seventy Six Only

Numbers of item 22 (Twenty two)

Rain Water Harvesting System

ESTIMATED AMOUNT : Rs.

S. No. Code No. DESCRIPTION UNIT QUANTITY RATE (IN FIG.) RATE (IN WORDS) AMOUNT Rs.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 3.7 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 1.63 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.4 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

4 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand): Extra for Brick work in superstructure above plinth level upto floor V Cu.M 2.63 5958.5 Rs. Five Thousand Nine Hundred Fifty Eight And Fifty Paise Only

5 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 104.58 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.62 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

7 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 3 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

8 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 6 91.8 Rs. Ninety One And Eighty Paise Only

9 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 14 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

10 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 30 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

11 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 13.41 203.6 Rs. Two Hundred Three And Sixty Paise Only

12 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 3.24 118.1 Rs. One Hundred Eighteen And Ten Paise Only

13 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level:All types of soil:300 mm dia M 10 486.8 Rs. Four Hundred Eighty Six And Eighty Paise Only

14 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 5 660.1

15 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 10 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

16 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.31 1188.9 Rs. One Thousand One Hundred Eighty Eight And Ninety Paise Only

17 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.98 1195.6 Rs. One Thousand One Hundred Ninety Five And Sixty Paise Only

18 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

19 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

20 Br OL01 Providing unskilled labour for site clearance and reproviding CA Sheet roofing by manual means Each 7 355.42 Rs. Three Hundred Fifty Five And Fourty Two Paise Only

21 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.999 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

22 Extra cost of slag cement Tirhut Zone Per bag 27 10.34 Rs. Ten And Thirty Four Paise Only

23 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.999 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

24 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.84 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

25 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 0.36 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

26 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Seventy Two Thousand Thirty Two Only

Numbers of item 26 (Twenty Six)

Horticulture VIDE S/R OF Fore schedule of rates

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 1.12 f.s.o.r Plantation work ( 10 gram DAP and pesticide per plant). Transportation of plant and planting work from temporary plant salad. Plantation 20 man days, Transportation of Plant - 6 man days, DAP - 260/- persicide - 100 Rs, etc - 50/- Each 30 5.43

2 3.5.1 F.S.O.R Provision for plant transportion by tractor. Per %o 0.3 1000 Rs. One Thousand Only

3 6.3 f.s.o.r Providing bomboo barricating. Each 30 100 Rs. One Hundred Only

4 6.4.1 f.s.o.r Purchase of earth and round 152.5 [email protected]/cft per % no plants. Per %o 3 1062.5 Rs. One Thousand Sixty Two And Fifty Paise Only

5 9.2 f.s.o.r Labour for planting. Each 30 15.7 Rs. Fifteen And Seventy Paise Only

6 9.2.3 f.s.o.r (A) Suppling and providing plants all as following details (10 feet) Each 3 250 Rs. Two Hundred Fifty Only

7 9.2.3 f.s.o.r (B) Suppling and providing plants all as following details (10 plant's) Each 3 2000 Rs. Two Thousand Only

Rs. Tthirteen Thousand Eight Hundred Seventy One Only

Numbers of item 7 (Seven)

Campus Development

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 60.18 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

2 16.91.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern Sq.M 395 714 Rs. Seven Hundred Fourteen Only

3 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 60.18 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Three Lakh Fifteen Thousand Eight Hundred Thirty Seven Only

Numbers of item 3 (Three)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

I FIRE HYDRANT SYSTEM

1 Providing and fixing M.S. pipe as per IS:1239 ( Heavy Class) complete with all fittings like unions, couplings, bends, elbows, trees, offsets, reducers, flanges, etc. as per requirement at site including painting with two coats of synthetic enamel paint, cutting and making good the walls complete. Pipe up to 50 mm dia will be with threated joints with hold tight and 65 mm dia. And above will be with welded joint.The cost shall include the MS/GI structural supports as per approved drawing and specifications. (b) 100 mm dia M 12 2172 Rs. Two Thousand One Hundred Seventy Two Only

2 Providing and fixing M.S. pipe as per IS:1239 ( Heavy Class) complete with all fittings like unions, couplings, bends, elbows, trees, offsets, reducers, flanges, etc. as per requirement at site including painting with two coats of synthetic enamel paint, cutting and making good the walls complete. Pipe up to 50 mm dia will be with threated joints with hold tight and 65 mm dia. And above will be with welded joint.The cost shall include the MS/GI structural supports as per approved drawing and specifications. (a) 80 mm dia M 8 1566

3 Providing and fixing ISI marked SS-304 fire hydrant valve 80 mm inlet with single outlet and fitted with63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain nuts, bolts and 3 mm thick compressed asbedstos gasket at locations as per drawing (inlet flange as per IS:5290-1969 Class C) Each 1 8585 Rs. Eight Thousand Five Hundred Eighty Five Only

4 Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 36.5 m long high pressure hose as per IS: 5132 with 5 mm outlet 55 nozzle with shut off valve (IS:884-1969). Each 1 10605 Rs. Ten Thousand Six Hundred Five Only

5 Providing and fixing 63 mm dia 15 m long EPDM lined fabric hose including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS: 636 Type II and coupling to IS: 903-1975 with ISI certification. Each 1 8075 Rs. Eight Thousand Seventy Five Only

6 Providing and fixing standard shot size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling ISI marked. Each 1 3535 Rs. Three Thousand Five Hundred Thirty Five Only

7 Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. (20kg/sq.cm) Each 1 1566 Rs. One Thousand Five Hundred Sixty Six Only

8 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with single glazed front door and pad locking arrangement, painted Fire Red with stove enaveled pain t and FIRE HOSE written on front including necessary supports (to house one length of canvas hosed with couplings, branch pipe and nozzle). Each 1 4545 Rs. Four Thousand Five Hundred Fourty Five Only

9 Providing and fixing cast iron butterfly valves on PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket,companion flanges and complete in all respects. (a) 100 mm dia with lever operated. Each 1 9292 Rs. Nine Thousand Two Hundred Ninety Two Only

10 Providing and fixing cast iron butterfly valves on PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket,companion flanges and complete in all respects. (a) 80 mm dia with lever operated. Each 1 7662 Rs. Seven Thousand Six Hundred Sixty Two Only

11 Providing and fixing C.I.double flanged horizontal dual plate water type non return valves PN 1.6 including washer, nuts, bolts, 3 mm thick compressed asbestos gasket with companion flanges, complete in all respect. (a) 100 mm dia Each 1 10897 Rs. Ten Thousand Eight Hundred Ninety Seven Only

12 Providing and fixing 25 mm dia gun metal single acting air release vale with screwed inlet tested for 20 kg./cm2 Each 1 1566 Rs. One Thousand Five Hundred Sixty Six Only

13 Providing and fixing 150 mm dia Three-way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and a check vale protected b, cap scored with a chain glass bore etc. complete with 150 mm sluice valve and 150 mm non return valve (to be connected to riser). Each 1 9595 Rs. Nine Thousand Five Hundred Ninety Five Only

II HAND APPLIANCES (INTERNAL) Rs. Only

14 Providing and fixing Stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever diccharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etrc. complete. (a) Capactity 6 kg. Each 4 6565 Rs. Six Thousand Five Hundred Sixty Five Only

15 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash fasteners etc, complete. Capacity 4.5 Kg Each 2 7878 Rs. Seven Thousand Eight Hundred Seventy Eight Only

III FIRE PUMPS & ACCESSORIES Rs. Only

16 Providing and fixing horizontal split casing single/multi stage, single/multi outlet pumping set with bronze impeller with C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories complete as per specifications incluidng pressure gauges with gunmetal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (Specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction with starter & cabling and starter to be placed at ground level:- Type : Mono block, Speed(rpm) : 2900, Capacity : 450 lpm & Head:20 Mtr. Each 1 121200 Rs. One Lakh Twenty One Thousand Two Hundred Only

17 Supply, laying & connecting with terrace upmp to starter at ground level with 3.5 core x 16 sq.mm armoured aluminium cable 1.1 kv grade M 35 285 Rs. Two Hundred Eighty Five Only

IV FIRE ALARM SYSTEM Rs. Only

18 Suppy, installation, testing and commissioning of fire alarm control panel with LCD display having battery charger & battries of 2 zone capacity Each 1 17544 Rs. Seventeen Thousand Five Hundred Fourty Four Only

19 SITC of manual call point. Each 2 1061 Rs. One Thousand Sixty One Only

20 SITC of hooter with flasher Each 2 1263 Rs. One Thousand Two Hundred Sixty Three Only

21 Supply and laying of 1.5 sq.mm double core copper wire with 15mm dia conduit pipe. Mtr 75 232 Rs. Two Hundred Thirty Two Only

Rs. Three Lakh Twenty Seven Thousand Two Hundred Ninety Eight Only

Numbers of item 25 (Twenty five)

Electrification Work

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I. box etc as required. (a) Group B Per Point 88 947 Rs. Nine Hundred Fourty Seven Only

2 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 225 309

3 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 600 246 Rs. Two Hundred Fourty Six Only

4 1.7.11 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x6.0 mm2 + 1x6.0mm2) Per Mtr. 60 660 Rs. Six Hundred Sixty Only

5 1.7.13 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x16 mm2 + 1x6 mm2) Per Mtr. 10 1312 Rs. One Thousand Three Hundred Twelve Only

6 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as req u ired. Each 11 358 Rs. Three Hundred Fifty Eight Only

7 1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection etc. as required. Each 17 414 Rs. Four Hundred Fourteen Only

8 1.32 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. Each 16 531 Rs. Five Hundred Thirty One Only

9 1.33 Supplying and fixing 2 Pin, 5/6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 61 64 Rs. Sixty Four Only

10 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 32 80 Rs. Eighty Only

11 1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 4 683 Rs. Six Hundred Eighty Three Only

12 2.4.1 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' l00 A, 30 KA, FPMCCB Each 1 8172 Rs. Eight Thousand One Hundred Seventy Two Only

13 2.5.2 Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 100 Amps. Each 1 5019 Rs. Five Thousand Nineteen Only

14 2.7.3 Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 100 A Each 1 9334 Rs. Nine Thousand Three Hundred Thirty Four Only

15 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way ( 4 + 12 ), Double door, horizontal type Each 2 4184

16 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6 A to 32'A, Single pole Each 24 237 Rs. Two Hundred Thirty Seven Only

17 2.16.1 Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps Each 2 967 Rs. Nine Hundred Sixty Seven Only

18 2.20. Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 1 214 Rs. Two Hundred Fourteen Only

19 3.13 Supplying and laying earth connections from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and rifilling etc. as required. Metre 10 367 Rs. Three Hundred Sixty Seven Only

20 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

21 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 22 521 Rs. Five Hundred Twenty One Only

22 5.1 Supplying and fixing 70112 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 4 1275 Rs. One Thousand Two Hundred Seventy Five Only

23 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt Each 5 5516 Rs. Five Thousand Five Hundred Sixteen Only

24 6.1.4 Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required. 9/10 watt LED lamp Each 44 161 Rs. One Hundred Sixty One Only

25 7.1.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm. Metre 70 315 Rs. Three Hundred Fifteen Only

26 7.7.8 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 35 sq. mm, 3.5 core Metre 100 415 Rs. Four Hundred Fifteen Only

27 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sq.Ft 12 1809 Rs. One Thousand Eight Hundred Nine Only

28 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 1 6536 Rs. Six Thousand Five Hundred Thirty Six Only

29 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 11 2482 Rs. Two Thousand Four Hundred Eighty Two Only

30 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 5 2572 Rs. Two Thousand Five Hundred Seventy Two Only

Lighting Conductor

31 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

32 4.1 Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required. Each 1 1056 Rs. One Thousand Fifty Six Only

33 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run) Metre 15 516 Rs. Five Hundred Sixteen Only

34 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) Metre 5 559 Rs. Five Hundred Fifty Nine Only

35 7.7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 25 sq. mm, 3.5 core Metre 100 346 Rs. Three Hundred Fourty Six Only

36 Approved SE Dt 14-07-26 Supplying, installation & commissioning of Silent type, Air cooled 20 KVA D.G Set with AMF control having output of 9 kw to 12 kw, with frequency 50 HZ cubic capacity 2-1.56 ltr with copper earthing etc as required. Set 1 598050 Rs. Five Lakh Ninety Eight Thousand Fifty Only

37 Rate from Bihta Fire hydrant Construction of cemented platform of minimum 2 feet height from finished ground level of suitable size as prescribed by manufactrurer of DG set with polycarbonate sheet roof shelter framed on iron frame structure etc as required to install 10 KVA DG silent Set 1 115885 Rs. One Lakh Fifteen Thousand Eight Hundred Eighty Five Only

Rs. Fourteen Lakh Nine Hundred Six Only

Numbers of item 37 (Thirty seven)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 EXECUTIVE TABLE Table with ERU and Pedestal 1800 mm x 750 mm x 750 mm with KBPT, CPU Trolley - Structure / Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Table top Material- Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material - 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/ Latest. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop - 1800 mm. Depth of table - 750 mm. Height of table - 750 mm. Size (L x W) /diameter of leg material - 25 mm . ERU unit consists of - Each 1 38205.2

1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/ Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table / ERU / Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate.

2 EXECUTIVE CHAIR High Back Knitteed Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type - Tilting type. Pedestal Base - Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material - Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest 30 mm . Backrest upholstery material - Fabric. Upholstery material thickness / fabric substance used in seat /backrest - 0.7 to 1.5 mm ( for fabric). Minimum width of seat 500 mm . Minimum depth of seat- 450 mm Minimum width of backrest - 450 mm . Backrest height- High back (551 and above). Minimum pedestal size (diameter) - 650 mm . (Green Guard by U/L). Dimension variation of ± 5mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 1 16231.6 Rs. Sixteen Thousand Two Hundred Thirty One And Sixty Paise Only

3 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 2 25446.3 Rs. Twenty Five Thousand Four Hundred Fourty Six And Thirty Paise Only

4 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 12 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

5 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 5 4004 Rs. Four Thousand Four Only

6 ALMIRAH Storage of Size- 1980mm ( H ) x 900mm ( W ) x 500mm ( D ) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L and BIS Certficate.. Each 4 33458.7 Rs. Thirty Three Thousand Four Hundred Fifty Eight And Seventy Paise Only

7 WHEEL CHAIR FOLDING WHEEL CHAIR - Total weight of Wheel Chair ( Kg ) - 8. Back rest with Cushion- Yes, With Cushion on Seat . Leg guard type- Swinging and Detachable. Slope of Seat ( Degree ) - 0. Type of Back rest - Foldable. Overall Length (mm) - 790. Foldable - Yes. Types of Wheel Chairs- Attendant Controlled Non Powered. Frame tube thickness (mm) - 1.2. Clearance of frame from floor ( mm ) - 0. Overall Height ( mm )- 870 . Loading Capacity ( Kg ) - 100. Arm rest Type - Fixed. Cushion Material Thickness ( mm ) - 30. Seat Depth ( mm ) - 400. Distance between seat and foot rest ( mm ) - 420. Clearance of footrest from floor ( mm) - 150. Finish of Aluminium casts- Anodized. Hand Rim - With. Handle for push/pull action of Wheel Chair- Yes. Thickness of Seat ( mm ) - 30. Slope Each 1 27065.5 Rs. Twenty Seven Thousand Sixty Five And Fifty Paise Only

of the backrest with respect to floor ( Degree ) - 90. Rear wheel tyre type Solid- Arm rest height from seat ( mm ) - 105. Cushion on Arm rest- With. Types of foot rest - Swinging without Height Adjustment Frame tube Dia ( mm ) - 22. Width of wheel chair- Fixed. Seat Height- Fixed. Seat hight from floor at the front ( mm )- 520. Thickness of back rest (mm) - 10 Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016,

8 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 1 3554.1 Rs. Three Thousand Five Hundred Fifty Four And Ten Paise Only

9 Dustbin 120 Litre HDPE plastic, 100% virgin plastic, reinforced walls, UV protected outdoor bin with 200 mm rubber-tired wheels for mobility, hinged lids securely fitted. Capacity-120 Litre. Each 1 6988.3 Rs. Six Thousand Nine Hundred Eighty Eight And Thirty Paise Only

Grand Total Including GST

*** Note:-Dimension variable upto ± 30 mm is acceptable.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF CIRCLE INSPECTOR OFFICE CUM RESIDENCE AT KESARIYA POLICE STATION IN THE DISTRICT OF (MOTIHARI) WEST CHAMPARAN - WITH ELECTRIFICATION Job No. GROUP- 01 OF e-N.I.T. No. 15 /2025-26

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ in Rs. :- 10000

Bid processing fee through online mode:- As per eproc 2

SL. NO NAME OF WORK TOTAL Rs P

1 Building Portion

5 Compound Wall 280 Rft

7 Rain Water Harvesting System

9 Campus Development

10 Fire Fighting

Add GST @ 5.36%

11 Electrification Work

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. Ninety Seven Lakh Fifty Two Thousand Nine Hundred Eighteen Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, Work Circle-01

PLEASE FILL THE COLOUR CELL

Name of the Contractor

Address of the Contractor & Mobile No.

Rate in % quoted by the Agency (Above, Below, AT PAR):

Rate Quoted by the Contractor

TOTAL Quoted Amount

Mandatory Details

1 Earnest Money - (A) As prescribed in Tender document duly pledged in Favour of EE Darbhanga Divn.

Earnest Money-Bid Security Amount-Rs. Bid Security Amount - Rs.

2 Character Certificate No. with last Validity date.

3 VAT Registration No. with last Validity date.

BILL OF QUANTITY FOR THE CONSTRUCTION OF CIRCLE INSPECTOR OFFICE CUM RESIDENCE AT KESARIYA POLICE STATION IN THE DISTRICT OF (MOTIHARI) WEST CHAMPARAN

Building Portion

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 7.54 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 7.54 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.799 287.3

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 7.185 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

5 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 48 57.16 Rs. Fifty Seven And Sixteen Paise Only

6 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 0.399 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

7 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 0.600 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

8 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 0.400 404.7 Rs. Four Hundred Four And Seventy Paise Only

9 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 0.800 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

10 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 0.000 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

11 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 0.000 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

12 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 0.399 94.5 Rs. Ninety Four And Fifty Paise Only

13 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 0.399 92.6 Rs. Ninety Two And Sixty Paise Only

14 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 0.799 90.8 Rs. Ninety And Eighty Paise Only

15 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 0.200 91.7 Rs. Ninety One And Seventy Paise Only

16 5.22.7E Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 20 mm dia. KG 0.599 91.7 Rs. Ninety One And Seventy Paise Only

17 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 0.000 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

18 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 0.000 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

19 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

20 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 0.999 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

21 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 0.199 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

22 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 0.000 723 Rs. Seven Hundred Twenty Three Only

23 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly. plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. but excluding carriage cost of bricks, sand and jhama metal. Per M 0.000 1087.9 Rs. One Thousand Eighty Seven And Ninety Paise Only

24 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including stainless steel butt hinges with necessary screws. Sq.m 48.5 2845.6 Rs. Two Thousand Eight Hundred Fourty Five And Sixty Paise Only

25 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 778.37 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

26 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 25 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

27 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 50 111.4 Rs. One Hundred Eleven And Fourty Paise Only

28 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 50 57.1 Rs. Fifty Seven And Ten Paise Only

29 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 25 60.8 Rs. Sixty And Eighty Paise Only

30 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 57.87 9471 Rs. Nine Thousand Four Hundred Seventy One Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

31 10.14.1 Providing and fixing T-iron frames for doors. windows and ventilators of mils steel Tee-sections, joints miltred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concerete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including. KG 448.33 110.4 Rs. One Hundred Ten And Fourty Paise Only

32 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 16 165.4 Rs. One Hundred Sixty Five And Fourty Paise Only

33 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 0 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

34 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 182.95 546.8 Rs. Five Hundred Fourty Six And Eighty Paise Only

35 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate Sq.M 0.400 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

36 11.6.1 Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement : 18 mm thick Sq.M 47.56 304.15 Rs. Three Hundred Four And Fifteen Paise Only

37 11.19.2 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Medium shade using 50% white cement and 50% ordinary cement. Sq.M 0.999 985.4 Rs. Nine Hundred Eighty Five And Fourty Paise Only

38 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4: 20 to 25 mm thick. Sq.M 0.200 1252.7 Rs. One Thousand Two Hundred Fifty Two And Seventy Paise Only

39 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm. Sq.M 41.305 1334.9 Rs. One Thousand Three Hundred Thirty Four And Ninety Paise Only

40 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 0.399 795 Rs. Seven Hundred Ninety Five Only

41 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 16.925 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

42 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 0.599 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

43 11.73 + 13.57.1 Providing designation 100A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.including flush pointing on brick flooring with cement mortar 1:3( 1cement: 3 coarse sand). Sq.M 75.98 537.5 Rs. Five Hundred Thirty Seven And Fifty Paise Only

44 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 28 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

45 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 2 190.7 Rs. One Hundred Ninety And Seventy Paise Only

46 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 4 132 Rs. One Hundred Thirty Two Only

47 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 4 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

48 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 56 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

49 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 0.599 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

50 13.13.1+ 13.26 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) : neat cement punning. Sq.M 9.6 268.1 Rs. Two Hundred Sixty Eight And Ten Paise Only

51 13.13.1+ 13.36.5+ 13.26 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) :Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20mm cement plaster 1:3 (1 cement : 3 sand) including neat cement punning Sq.M 0.999 280.9 Rs. Two Hundred Eighty And Ninety Paise Only

52 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 0.800 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

53 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 0.800 137 Rs. One Hundred Thirty Seven Only

54 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 0.800 102.3 Rs. One Hundred Two And Thirty Paise Only

55 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 0.399 105.4 Rs. One Hundred Five And Fourty Paise Only

56 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 0.399 84.5

57 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete,including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap): 300 mm dia piles. M 157.32 902.6 Rs. Nine Hundred Two And Sixty Paise Only

58 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.199 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

59 Extra cost of slag cement Tirhut Zone Per bag 1328 10.34 Rs. Ten And Thirty Four Paise Only

60 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.199 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

61 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.800 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

62 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 0.399 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

63 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 92.55 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Fifty Three Lakh Twenty Four Thousand Nine Hundred Sixty Four Only

Numbers of item 63 (Sixty three)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

Sanitary 90 Cft Septic Tank 2 No. & 4'-0" dia Soak pit- 2 nos

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 22.05 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.000 3998.1

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.89 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 63 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 7.73 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 1.34 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 8.18 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 20 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 4.5 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.1.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia PVC Coupler Each 2 79.8 Rs. Seventy Nine And Eighty Paise Only

11 12.79.1.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia PVC Coupler Each 2 120 Rs. One Hundred Twenty Only

12 12.79.3.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75 x 75 x 75mm dia Single Jn Tee with door Each 1 141.6 Rs. One Hundred Fourty One And Sixty Paise Only

13 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 1 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

14 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 2 190.7 Rs. One Hundred Ninety And Seventy Paise Only

15 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 2 91.8 Rs. Ninety One And Eighty Paise Only

16 12.79.5.1+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm Floor trap Each 2 139.7 Rs. One Hundred Thirty Nine And Seventy Paise Only

17 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 2 132 Rs. One Hundred Thirty Two Only

18 12.80.1 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 75mm dia clip Each 6 184.1 Rs. One Hundred Eighty Four And Ten Paise Only

19 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 6 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

20 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 14.57 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

21 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 26.77 203.6 Rs. Two Hundred Three And Sixty Paise Only

22 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 7.4 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

23 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 6 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

24 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 1 4230 Rs. Four Thousand Two Hundred Thirty Only

25 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 7 3723.2

26 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.brass pillar tap Each 5 2135.8 Rs. Two Thousand One Hundred Thirty Five And Eighty Paise Only

27 17.10.2.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm Each 1 2812.9 Rs. Two Thousand Eight Hundred Twelve And Ninety Paise Only

28 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 12 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

29 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe M 10 410.7 Rs. Four Hundred Ten And Seventy Paise Only

30 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 4 310.9 Rs. Three Hundred Ten And Ninety Paise Only

31 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 1 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

32 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

33 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 3.03 1146.4 Rs. One Thousand One Hundred Fourty Six And Fourty Paise Only

34 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.000 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

35 Extra cost of slag cement Tirhut Zone Per bag 29 10.34 Rs. Ten And Thirty Four Paise Only

36 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 5.65 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

37 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 3.97 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

38 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 3.01 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

Rs. Two Lakh Twenty Two Thousand Five Hundred Fifty Two Only

Numbers of item 38 (Thirty eight)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 4 1068.5 Rs. One Thousand Sixty Eight And Fifty Paise Only

2 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 4 713.3

3 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 4 146.3 Rs. One Hundred Fourty Six And Thirty Paise Only

5 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Each 4 424 Rs. Four Hundred Twenty Four Only

6 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 8 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

7 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 7.2 350.8 Rs. Three Hundred Fifty And Eighty Paise Only

8 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 15 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

9 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 7.5 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

12 18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Each 10 303.8 Rs. Three Hundred Three And Eighty Paise Only

13 18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Each 10 303.8 Rs. Three Hundred Three And Eighty Paise Only

15 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 10 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

82 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore Each 2 589.9 Rs. Five Hundred Eighty Nine And Ninety Paise Only

90 18.19.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore:Horizontal Each 2 506.6 Rs. Five Hundred Six And Sixty Paise Only

92 18.19.2.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Horizontal Each 2 677.6 Rs. Six Hundred Seventy Seven And Sixty Paise Only

17 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Each 1 190.1 Rs. One Hundred Ninety And Ten Paise Only

18 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 2000 9.7 Rs. Nine And Seventy Paise Only

Rs. Fifty Five Thousand Eight Hundred Eleven Only

Numbers of item 18 (Eighteen)

Boring P.V.C.pipe- DEEP TUBEWELL 300mmx150mmx106.68m

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS AMOUNT

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9 Rs. Five Hundred Sixty Seven And Ninety Paise Only

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 0.000 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. One Lakh Seventy Seven Thousand One Hundred Fifty Two Only

Numbers of item 11 (Eleven)

Compound Wall 280 Rft

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 20.53 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.999 287.3

3 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 42.03 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

4 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 6.23 404.7 Rs. Four Hundred Four And Seventy Paise Only

5 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 28.16 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

6 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 254.36 94.5 Rs. Ninety Four And Fifty Paise Only

7 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 339.15 92.6 Rs. Ninety Two And Sixty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 254.36 90.8 Rs. Ninety And Eighty Paise Only

9 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 5.09 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

10 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 2.14 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

11 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Cu.m 0.78 5677.2 Rs. Five Thousand Six Hundred Seventy Seven And Twenty Paise Only

12 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 10.46 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

13 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 208 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

14 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 13.48 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

15 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 150.19 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

16 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 150.19 137 Rs. One Hundred Thirty Seven Only

17 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 43.49 84.5 Rs. Eighty Four And Fifty Paise Only

18 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.999 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

19 Extra cost of slag cement Tirhut Zone Per bag 86 10.34 Rs. Ten And Thirty Four Paise Only

20 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

21 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.999 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

22 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 0.999 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

23 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.999 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Total of 100 Rft

Total of 280 Rft

Rs. Nine Lakh Six Hundred Eleven Only

Numbers of item 23 (Twenty three)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 4.53 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 8.83 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.45 287.3

4 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 9.77 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

5 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 0.000 404.7 Rs. Four Hundred Four And Seventy Paise Only

6 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 11.78 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

7 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 0.999 94.5 Rs. Ninety Four And Fifty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 213.24 90.8 Rs. Ninety And Eighty Paise Only

9 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 94.42 91.7 Rs. Ninety One And Seventy Paise Only

10 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 0.94 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

11 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 0.31 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

12 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 768 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

13 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.51 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

14 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 11.78 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

15 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 11.78 137 Rs. One Hundred Thirty Seven Only

16 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 18.12 84.5 Rs. Eighty Four And Fifty Paise Only

17 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.000 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

18 Extra cost of slag cement Tirhut Zone Per bag 11 10.34 Rs. Ten And Thirty Four Paise Only

19 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

20 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.67 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

21 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 1.86 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

22 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.5 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. One Lakh Fifty Four Thousand Five Hundred Seventy Six Only

Numbers of item 22 (Twenty two)

Rain Water Harvesting System

ESTIMATED AMOUNT : Rs.

S. No. Code No. DESCRIPTION UNIT QUANTITY RATE (IN FIG.) RATE (IN WORDS) AMOUNT Rs.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 3.7 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 1.63 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.4 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

4 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand): Extra for Brick work in superstructure above plinth level upto floor V Cu.M 2.63 5958.5 Rs. Five Thousand Nine Hundred Fifty Eight And Fifty Paise Only

5 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 104.58 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.62 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

7 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 3 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

8 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 6 91.8 Rs. Ninety One And Eighty Paise Only

9 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 14 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

10 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 30 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

11 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 13.41 203.6 Rs. Two Hundred Three And Sixty Paise Only

12 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 3.24 118.1 Rs. One Hundred Eighteen And Ten Paise Only

13 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level:All types of soil:300 mm dia M 10 486.8 Rs. Four Hundred Eighty Six And Eighty Paise Only

14 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 5 660.1

15 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 10 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

16 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.31 1188.9 Rs. One Thousand One Hundred Eighty Eight And Ninety Paise Only

17 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.98 1195.6 Rs. One Thousand One Hundred Ninety Five And Sixty Paise Only

18 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

19 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

20 Br OL01 Providing unskilled labour for site clearance and reproviding CA Sheet roofing by manual means Each 7 355.42 Rs. Three Hundred Fifty Five And Fourty Two Paise Only

21 Extra cost of brick 100A (a) Tirhut Zone Per %o 0.999 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

22 Extra cost of slag cement Tirhut Zone Per bag 27 10.34 Rs. Ten And Thirty Four Paise Only

23 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.999 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

24 Do--do-- (b) Coarse sand ( Lead 77 Km pucca from Doriganj river to work site) Cu.M 0.84 Rs. One Thousand Five Hundred Seventy Four And Ninety Four Paise Only

25 Do-do- (b) Stone chips ( Lead 379 Km - Rail + 41 Km - Road to worksite ) Cu.M 0.36 2939.51 Rs. Two Thousand Nine Hundred Thirty Nine And Fifty One Paise Only

26 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Seventy Two Thousand Thirty Two Only

Numbers of item 26 (Twenty Six)

Horticulture VIDE S/R OF Fore schedule of rates

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 1.12 f.s.o.r Plantation work ( 10 gram DAP and pesticide per plant). Transportation of plant and planting work from temporary plant salad. Plantation 20 man days, Transportation of Plant - 6 man days, DAP - 260/- persicide - 100 Rs, etc - 50/- Each 30 5.43

2 3.5.1 F.S.O.R Provision for plant transportion by tractor. Per %o 0.3 1000 Rs. One Thousand Only

3 6.3 f.s.o.r Providing bomboo barricating. Each 30 100 Rs. One Hundred Only

4 6.4.1 f.s.o.r Purchase of earth and round 152.5 [email protected]/cft per % no plants. Per %o 3 1062.5 Rs. One Thousand Sixty Two And Fifty Paise Only

5 9.2 f.s.o.r Labour for planting. Each 30 15.7 Rs. Fifteen And Seventy Paise Only

6 9.2.3 f.s.o.r (A) Suppling and providing plants all as following details (10 feet) Each 3 250 Rs. Two Hundred Fifty Only

7 9.2.3 f.s.o.r (B) Suppling and providing plants all as following details (10 plant's) Each 3 2000 Rs. Two Thousand Only

Rs. Tthirteen Thousand Eight Hundred Seventy One Only

Numbers of item 7 (Seven)

Campus Development

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 60.18 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

2 16.91.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern Sq.M 395 714 Rs. Seven Hundred Fourteen Only

3 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 60.18 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Three Lakh Fifteen Thousand Eight Hundred Thirty Seven Only

Numbers of item 3 (Three)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

I FIRE HYDRANT SYSTEM

1 Providing and fixing M.S. pipe as per IS:1239 ( Heavy Class) complete with all fittings like unions, couplings, bends, elbows, trees, offsets, reducers, flanges, etc. as per requirement at site including painting with two coats of synthetic enamel paint, cutting and making good the walls complete. Pipe up to 50 mm dia will be with threated joints with hold tight and 65 mm dia. And above will be with welded joint.The cost shall include the MS/GI structural supports as per approved drawing and specifications. (b) 100 mm dia M 12 2172 Rs. Two Thousand One Hundred Seventy Two Only

2 Providing and fixing M.S. pipe as per IS:1239 ( Heavy Class) complete with all fittings like unions, couplings, bends, elbows, trees, offsets, reducers, flanges, etc. as per requirement at site including painting with two coats of synthetic enamel paint, cutting and making good the walls complete. Pipe up to 50 mm dia will be with threated joints with hold tight and 65 mm dia. And above will be with welded joint.The cost shall include the MS/GI structural supports as per approved drawing and specifications. (a) 80 mm dia M 8 1566

3 Providing and fixing ISI marked SS-304 fire hydrant valve 80 mm inlet with single outlet and fitted with63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain nuts, bolts and 3 mm thick compressed asbedstos gasket at locations as per drawing (inlet flange as per IS:5290-1969 Class C) Each 1 8585 Rs. Eight Thousand Five Hundred Eighty Five Only

4 Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 36.5 m long high pressure hose as per IS: 5132 with 5 mm outlet 55 nozzle with shut off valve (IS:884-1969). Each 1 10605 Rs. Ten Thousand Six Hundred Five Only

5 Providing and fixing 63 mm dia 15 m long EPDM lined fabric hose including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS: 636 Type II and coupling to IS: 903-1975 with ISI certification. Each 1 8075 Rs. Eight Thousand Seventy Five Only

6 Providing and fixing standard shot size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling ISI marked. Each 1 3535 Rs. Three Thousand Five Hundred Thirty Five Only

7 Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. (20kg/sq.cm) Each 1 1566 Rs. One Thousand Five Hundred Sixty Six Only

8 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with single glazed front door and pad locking arrangement, painted Fire Red with stove enaveled pain t and FIRE HOSE written on front including necessary supports (to house one length of canvas hosed with couplings, branch pipe and nozzle). Each 1 4545 Rs. Four Thousand Five Hundred Fourty Five Only

9 Providing and fixing cast iron butterfly valves on PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket,companion flanges and complete in all respects. (a) 100 mm dia with lever operated. Each 1 9292 Rs. Nine Thousand Two Hundred Ninety Two Only

10 Providing and fixing cast iron butterfly valves on PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket,companion flanges and complete in all respects. (a) 80 mm dia with lever operated. Each 1 7662 Rs. Seven Thousand Six Hundred Sixty Two Only

11 Providing and fixing C.I.double flanged horizontal dual plate water type non return valves PN 1.6 including washer, nuts, bolts, 3 mm thick compressed asbestos gasket with companion flanges, complete in all respect. (a) 100 mm dia Each 1 10897 Rs. Ten Thousand Eight Hundred Ninety Seven Only

12 Providing and fixing 25 mm dia gun metal single acting air release vale with screwed inlet tested for 20 kg./cm2 Each 1 1566 Rs. One Thousand Five Hundred Sixty Six Only

13 Providing and fixing 150 mm dia Three-way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and a check vale protected b, cap scored with a chain glass bore etc. complete with 150 mm sluice valve and 150 mm non return valve (to be connected to riser). Each 1 9595 Rs. Nine Thousand Five Hundred Ninety Five Only

II HAND APPLIANCES (INTERNAL) Rs. Only

14 Providing and fixing Stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever diccharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etrc. complete. (a) Capactity 6 kg. Each 4 6565 Rs. Six Thousand Five Hundred Sixty Five Only

15 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash fasteners etc, complete. Capacity 4.5 Kg Each 2 7878 Rs. Seven Thousand Eight Hundred Seventy Eight Only

III FIRE PUMPS & ACCESSORIES Rs. Only

16 Providing and fixing horizontal split casing single/multi stage, single/multi outlet pumping set with bronze impeller with C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories complete as per specifications incluidng pressure gauges with gunmetal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (Specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction with starter & cabling and starter to be placed at ground level:- Type : Mono block, Speed(rpm) : 2900, Capacity : 450 lpm & Head:20 Mtr. Each 1 121200 Rs. One Lakh Twenty One Thousand Two Hundred Only

17 Supply, laying & connecting with terrace upmp to starter at ground level with 3.5 core x 16 sq.mm armoured aluminium cable 1.1 kv grade M 35 285 Rs. Two Hundred Eighty Five Only

IV FIRE ALARM SYSTEM Rs. Only

18 Suppy, installation, testing and commissioning of fire alarm control panel with LCD display having battery charger & battries of 2 zone capacity Each 1 17544 Rs. Seventeen Thousand Five Hundred Fourty Four Only

19 SITC of manual call point. Each 2 1061 Rs. One Thousand Sixty One Only

20 SITC of hooter with flasher Each 2 1263 Rs. One Thousand Two Hundred Sixty Three Only

21 Supply and laying of 1.5 sq.mm double core copper wire with 15mm dia conduit pipe. Mtr 75 232 Rs. Two Hundred Thirty Two Only

Rs. Three Lakh Twenty Seven Thousand Two Hundred Ninety Eight Only

Numbers of item 25 (Twenty five)

Electrification Work

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I. box etc as required. (a) Group B Per Point 88 947 Rs. Nine Hundred Fourty Seven Only

2 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 225 309

3 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 600 246 Rs. Two Hundred Fourty Six Only

4 1.7.11 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x6.0 mm2 + 1x6.0mm2) Per Mtr. 60 660 Rs. Six Hundred Sixty Only

5 1.7.13 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x16 mm2 + 1x6 mm2) Per Mtr. 10 1312 Rs. One Thousand Three Hundred Twelve Only

6 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as req u ired. Each 11 358 Rs. Three Hundred Fifty Eight Only

7 1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection etc. as required. Each 17 414 Rs. Four Hundred Fourteen Only

8 1.32 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. Each 16 531 Rs. Five Hundred Thirty One Only

9 1.33 Supplying and fixing 2 Pin, 5/6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 61 64 Rs. Sixty Four Only

10 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 32 80 Rs. Eighty Only

11 1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 4 683 Rs. Six Hundred Eighty Three Only

12 2.4.1 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' l00 A, 30 KA, FPMCCB Each 1 8172 Rs. Eight Thousand One Hundred Seventy Two Only

13 2.5.2 Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 100 Amps. Each 1 5019 Rs. Five Thousand Nineteen Only

14 2.7.3 Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 100 A Each 1 9334 Rs. Nine Thousand Three Hundred Thirty Four Only

15 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way ( 4 + 12 ), Double door, horizontal type Each 2 4184

16 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6 A to 32'A, Single pole Each 24 237 Rs. Two Hundred Thirty Seven Only

17 2.16.1 Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps Each 2 967 Rs. Nine Hundred Sixty Seven Only

18 2.20. Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 1 214 Rs. Two Hundred Fourteen Only

19 3.13 Supplying and laying earth connections from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and rifilling etc. as required. Metre 10 367 Rs. Three Hundred Sixty Seven Only

20 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

21 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 22 521 Rs. Five Hundred Twenty One Only

22 5.1 Supplying and fixing 70112 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 4 1275 Rs. One Thousand Two Hundred Seventy Five Only

23 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt Each 5 5516 Rs. Five Thousand Five Hundred Sixteen Only

24 6.1.4 Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required. 9/10 watt LED lamp Each 44 161 Rs. One Hundred Sixty One Only

25 7.1.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm. Metre 70 315 Rs. Three Hundred Fifteen Only

26 7.7.8 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 35 sq. mm, 3.5 core Metre 100 415 Rs. Four Hundred Fifteen Only

27 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sq.Ft 12 1809 Rs. One Thousand Eight Hundred Nine Only

28 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 1 6536 Rs. Six Thousand Five Hundred Thirty Six Only

29 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 11 2482 Rs. Two Thousand Four Hundred Eighty Two Only

30 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 5 2572 Rs. Two Thousand Five Hundred Seventy Two Only

Lighting Conductor

31 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

32 4.1 Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required. Each 1 1056 Rs. One Thousand Fifty Six Only

33 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run) Metre 15 516 Rs. Five Hundred Sixteen Only

34 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) Metre 5 559 Rs. Five Hundred Fifty Nine Only

35 7.7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 25 sq. mm, 3.5 core Metre 100 346 Rs. Three Hundred Fourty Six Only

36 Approved SE Dt 14-07-26 Supplying, installation & commissioning of Silent type, Air cooled 20 KVA D.G Set with AMF control having output of 9 kw to 12 kw, with frequency 50 HZ cubic capacity 2-1.56 ltr with copper earthing etc as required. Set 1 598050 Rs. Five Lakh Ninety Eight Thousand Fifty Only

37 Rate from Bihta Fire hydrant Construction of cemented platform of minimum 2 feet height from finished ground level of suitable size as prescribed by manufactrurer of DG set with polycarbonate sheet roof shelter framed on iron frame structure etc as required to install 10 KVA DG silent Set 1 115885 Rs. One Lakh Fifteen Thousand Eight Hundred Eighty Five Only

Rs. Fourteen Lakh Nine Hundred Six Only

Numbers of item 37 (Thirty seven)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 EXECUTIVE TABLE Table with ERU and Pedestal 1800 mm x 750 mm x 750 mm with KBPT, CPU Trolley - Structure / Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Table top Material- Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material - 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/ Latest. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop - 1800 mm. Depth of table - 750 mm. Height of table - 750 mm. Size (L x W) /diameter of leg material - 25 mm . ERU unit consists of - Each 1 38205.2

1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/ Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table / ERU / Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate.

2 EXECUTIVE CHAIR High Back Knitteed Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type - Tilting type. Pedestal Base - Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material - Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest 30 mm . Backrest upholstery material - Fabric. Upholstery material thickness / fabric substance used in seat /backrest - 0.7 to 1.5 mm ( for fabric). Minimum width of seat 500 mm . Minimum depth of seat- 450 mm Minimum width of backrest - 450 mm . Backrest height- High back (551 and above). Minimum pedestal size (diameter) - 650 mm . (Green Guard by U/L). Dimension variation of ± 5mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 1 16231.6 Rs. Sixteen Thousand Two Hundred Thirty One And Sixty Paise Only

3 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 2 25446.3 Rs. Twenty Five Thousand Four Hundred Fourty Six And Thirty Paise Only

4 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 12 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

5 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 5 4004 Rs. Four Thousand Four Only

6 ALMIRAH Storage of Size- 1980mm ( H ) x 900mm ( W ) x 500mm ( D ) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L and BIS Certficate.. Each 4 33458.7 Rs. Thirty Three Thousand Four Hundred Fifty Eight And Seventy Paise Only

7 WHEEL CHAIR FOLDING WHEEL CHAIR - Total weight of Wheel Chair ( Kg ) - 8. Back rest with Cushion- Yes, With Cushion on Seat . Leg guard type- Swinging and Detachable. Slope of Seat ( Degree ) - 0. Type of Back rest - Foldable. Overall Length (mm) - 790. Foldable - Yes. Types of Wheel Chairs- Attendant Controlled Non Powered. Frame tube thickness (mm) - 1.2. Clearance of frame from floor ( mm ) - 0. Overall Height ( mm )- 870 . Loading Capacity ( Kg ) - 100. Arm rest Type - Fixed. Cushion Material Thickness ( mm ) - 30. Seat Depth ( mm ) - 400. Distance between seat and foot rest ( mm ) - 420. Clearance of footrest from floor ( mm) - 150. Finish of Aluminium casts- Anodized. Hand Rim - With. Handle for push/pull action of Wheel Chair- Yes. Thickness of Seat ( mm ) - 30. Slope Each 1 27065.5 Rs. Twenty Seven Thousand Sixty Five And Fifty Paise Only

of the backrest with respect to floor ( Degree ) - 90. Rear wheel tyre type Solid- Arm rest height from seat ( mm ) - 105. Cushion on Arm rest- With. Types of foot rest - Swinging without Height Adjustment Frame tube Dia ( mm ) - 22. Width of wheel chair- Fixed. Seat Height- Fixed. Seat hight from floor at the front ( mm )- 520. Thickness of back rest (mm) - 10 Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016,

8 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 1 3554.1 Rs. Three Thousand Five Hundred Fifty Four And Ten Paise Only

9 Dustbin 120 Litre HDPE plastic, 100% virgin plastic, reinforced walls, UV protected outdoor bin with 200 mm rubber-tired wheels for mobility, hinged lids securely fitted. Capacity-120 Litre. Each 1 6988.3 Rs. Six Thousand Nine Hundred Eighty Eight And Thirty Paise Only

Grand Total Including GST

*** Note:-Dimension variable upto ± 30 mm is acceptable.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF CIRCLE INSPECTOR OFFICE CUM RESIDENCE AT KESARIYA POLICE STATION IN THE DISTRICT OF (MOTIHARI) WEST CHAMPARAN - WITH ELECTRIFICATION Job No. GROUP- 01 OF e-N.I.T. No. 15 /2025-26

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ in Rs. :- 10000

Bid processing fee through online mode:- As per eproc 2

SL. NO NAME OF WORK TOTAL Rs P

1 Building Portion

5 Compound Wall 280 Rft

7 Rain Water Harvesting System

9 Campus Development

10 Fire Fighting

Add GST @ 5.36%

11 Electrification Work

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. Ninety Seven Lakh Fifty Two Thousand Nine Hundred Eighteen Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, Work Circle-01

PLEASE FILL THE COLOUR CELL

Name of the Contractor

Address of the Contractor & Mobile No.

Rate in % quoted by the Agency (Above, Below, AT PAR):

Rate Quoted by the Contractor

TOTAL Quoted Amount

Mandatory Details

1 Earnest Money - (A) As prescribed in Tender document duly pledged in Favour of EE Darbhanga Divn.

Earnest Money-Bid Security Amount-Rs. Bid Security Amount - Rs.

2 Character Certificate No. with last Validity date.

3 VAT Registration No. with last Validity date.