SOPD_G_DAL_1 Re-construction of road from Panbari-Kharupetia Road (Ch. 3rd to 8th Km)

Amount

Providing, laying, spreading and compacting stone aggregate of specific sizes to WBM specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 8-10 tones in stages to proper grade and camber, applying and brooming, stone screening/binding to fill up the inter stices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. Using stone screening Type-A 13.2 mmm fo Grade- 3 4.7/3(A)Grading-III (A) By Manual Means

Providing and applying primmer coat with bitumin emultion ( CSS-I) on prepared surcafe of granular base / WBM / WMM including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 Kg/sqm using mechanical means as per T.S. Clause 502. (i) Low porosity

Providing and applying tack coat with bitumin emultion (CRS-I) using emultion distributor at the rate of 0.25Kg/sqm to 0.30 Kg/sqm on the prepared dry and hungry bituminious surface cleaned with hydraulic broom as per Technical Specification Clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. (B) With rockdust as filler ( Refer Table 500-9 of MoSRT & H specification) (I)'with 60/70 or VG-30 grade bitumen (ii) Grading II : 10mm ( Nominal Size)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. (iv)80cm X 60 cm rectangular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. (ii) 60 cm equilateral triangle

M/S Bass Forum