Essential repair works at subroto park pump house, TPT coy pump house, nicholson range pump house and certain bore well in the AoR of AGE(U)W/S-III under AGE(I)(U) B/R Delhi Cantt-10

Amount

Taking down cement plaster on brick or stone walls,etc, including raking out joints, hacking for key scrubbing down with water etc, all as directed.(Complete removal surface to be verified by Engr-in-charge before apply next treatment)

M&L for 10mm thick rendering plaster in cement morter 1:6 on brickwork or concrete surface of wall (internal surfaces) finished even & smooth complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering plaster in cement morter 1:4 on brickwork or concrete surface of wall (external surfaces) finished even smooth complete all as specified and directed by Engr-in-charge.

M&L for applying 5mm thick rendering plaster in cement morter 1:3 on ceiling surface, finished even & smooth without using extra cement on brick/concrete surfaces with water proofing compound, complete all as specified.

M&L for preparation of new plastered external surface of walls, pillars, cornices, chajja, facia, dropwall, parapet, roof projection and applying two coats of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine, having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm including applying 1mm thick external wall care putty over disturbed surface during preparation or any reason with sanding for smooth surface, Allow 6-8 hrs to dry the surface for painting of subsequent coats etc. all work, complete all as specified and as directed.

M&L for preparation of new plastered surface of walls & apply two coat of cement base paint over a coat of alkali-resistant primer, complete all as specified and as directed.

M&L for two coats of oil bound distemper including preparation of new plastered internal surfaces of wall over one coat of wall care putty (not less than 1mm thick) complete all as specified and directed.

M&L for two coats of oil bound distemper including preparation of new plastered surfaces of ceiling over one coat of wall care putty (not less than 1mm thick) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. Exc 15 cm thickness (below or above ground level) complete all as spd and directed.

M&L for 40 mm thick cement concrete in 1:3:6 type C-1, using 20 mm graded stone aggregate as in floor finished even and fair complete all as spd and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing), removing tiles and rubbish off the premises complete.

M&L for machine cut kota stone slab flooring 20-25mm thick as in riser in steps,skirting ,dado and pillar laid over 15mm thick backing coat in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) thick on vertical surfaces such as skirting wall, and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in cement mortar (1:4) rough to receive tiles complete all as specified and directed.

Taking down shutters area exc 1.00 sqm but not exc 2.00 sqm and refixing in the same opening including edging, fixing hinges with screw etc as required complete all as spd and directed.

Demolition of brick masonry work built in cement mortar or cement lime mortar complete.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement morter 1:6 complete all as specified and directed

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan to any radius in half brick thick wall, built in CM 1:4 complete all as specified and directed

M&L for preparation of old treated internal surfaces of walls and applying one coat of oil bound distemper(approved quality and tint) using painting rollers complete all as specified and directed.

M&L for Preparation of old plastered external surface of walls, pillars, cornices, chajja, facia, dropwall, parapet, roof projection of existing treatment by scrapping with trucare wall Sander : L-01/H-01 (having mechanical vacuum mechanism having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9") to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manually scrapping tools where mechanical removal is not possible and applying two coats of weather proofing coats of 100% premium acrylic emulsion exterior paint with graco 490 spray machine, having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm including applying 1mm thick external wall care putty over disturbed surface during preparation or any reason with sanding for smooth surface, Allow 6-8 hrs to dry the surface for painting of subsequent coats etc. all work, complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying two coat of white wash on ceiling surface complete all as specified and directed.

M&L for preparation of old painted of wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint including easening of steel windows by provding lubricant oil to hinges/pivet complete all as specified and directed.

M&L for plinth protection 75 mm thick in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site.

M&L for 40mm thick cement concrete type B-2, 1:2:4 (20 mm graded aggregate) as in flooring, finishing with cement concrete surface even and smooth using extra cement complete all as specified and directed.

M&L 100 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base under PCC flooring all as specified.

S&F wire netting 20mm mesh size of galvanised steel wire 1.4mm dia fixed tightly with tinned tacks of wire staples to cover the cracks generated in the surface of wall plaster where ever required, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with oil putty or fixed with beads

M&L for sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc 0.5sqm in each pane complete all as specified and directed.

S&F 3 mm thick pin headed or figured glass and glazing with oil putty in square n exc 0.5 sq. m in each pane , complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, lacing courses, parapets, copings, kneelers, and the like including weathering, slightly rounded or chamfered angles and throating, all as directed.

Dismantling old wrought iron or mild steel work of any description including doors, gates complete all as specified and directed.

S&F framed work as in doors or gates of angle or grills or any other section tubular or square with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and haning; also fastening and fixing complete conforming to Fe-410-W (Gde-E-250) quality B

SURESH KUMAR SHARMA & CO

B. S BUILDERS