TOUCHUP PAINTING WORKS INSIDE FACTORY OF HAL ENGINE DIVISION.

Providing and painting two or more coats white washing with lime to give an even shade over old work on wall and ceiling in all heights with preparation of surface by using wire brush, sand / emery paper, removal of scale and rust etc. all complete as per specification and direction of Engineer In Charge.

Wall painting with acrylic emulsion paint of following coat having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including preparation of surface with all safety measures etc. all complete as per dierction of Engineer in charge.

One or more coats painting with synthetic enamel paint on old work of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Two or more coats painting on new work with synthetic enamel paint of approved brand and manufacture to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Finishing walls with one or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Old work @ 0.83 ltr/10 sqm). with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Finishing walls with two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on old work applied @ 1.43 ltr/ 10 sqm over existing cement paint surface with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Plastering with 12 mm cement plaster of mix in cement mortar 1:4 (1 cement: 4 fine sand) in brick work, concrete work or any other surface etc. all complete as per specification and direction of Engineer In Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. all complete as per direction of Engineer in charge.

Providing and finishing with Epoxy paint (two or more coats) at all locations prepared and applied over steel surface as per manufacturer’s specifications including appropriate priming coat with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Supplying carrying to site all approved materials and providing applying of two coats of paints with PU enamel paint over one coat of PU primer of approved make / shade on any surface at all heights neatly without brush mark. The work shall include preparation of the surfaces by using sand / emery papers , cleaning removal of the scales , peeled surfaces filling the pits / depressions , nail - holes knots etc, by putty and applying paint to get uniform finish without any patches and brush mark including erection of safe / rigid scaffoldings cleaning the area after painting etc. all complete as per specifications and directions of Engineer - in - Charge.

Registration, HSN / SAC Code & GST Rate

Invoicing & Payment

Input Tax Credit

Penalty for Non-compliance of GST Act

Anti-profiteering Measure .

Other Provision

Allottment of quarters

TOUCHUP PAINTING WORKS INSIDE FACTORY OF HAL ENGINE DIVISION.

KPTCC/W/558

EXPERIENCE DETAILS

ONE WORK OF 80% VALUE ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

TWO (02) WORKS OF 50% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

THREE (03) WORKS OF 40% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

DETAILS OF SOLVENCY CERTIFICATE

CERTIFICATE NO.