Outsourcing and maint / repair of water supply pump house and connected items under GE (Army) Suratgarh at Suratgarh Mil Stn

Amount

Manning Operation pump house at new Military Hospital by employing Fitter General Mechanic (FGM) – 01 No. in each shift for two shifts (each shift of 08 hours) daily including Sundays and holidays (1st Shift from 0600 hours to 1400 hours and 2nd Shift from 1400 hours to 2200 hours) comprising with the following equipments :- (a) Centrifugal pumping Set with motor capacity 30 KW - 02 Nos. (b) Underground Sump - 01 No. (c) Over Head Tank - 01 No. (d) LT Panel - 01 No. (e) Chlorination plant - 01 No.

Manning Operation pump house at Suratgarh Mil Stn by employing Fitter General Mechanic (FGM) – 01 No. in each shift for two shifts (each shift of 08 hours) daily including Sundays and holidays (1st Shift from 0600 hours to 1400 hours and 2nd Shift from 1400 hours to 2200 hours) comprising with the following equipments :- (a) Centrifugal pumping Set with motor capacity 5 HP - 02 Nos. (b) Underground Sump - 01 No. (c) LT Panel - 01 No. Notes for Srl Item No 1 & 2 :- (i) Minor repair includes all the preventive maintenance such as greasing, oiling, tightening of nuts and bolts of pump-motor sets and tightening of loose connections in starters and panels and replacing thimbles, rubber coupling etc. (ii) Log sheet for installation shall be maintain by operator for each shift duly signed by operator and contractor and submitting of the same before producing of RAR / Bills. (iii) Bidders may please note that the rate quoted for outsourcing work shall not less than the minimum wages circulated by Chief Labour Commissioner, GOI, Min of Labour, New Delhi for Suratgarh (Class 'C' City) Plus ESI (EPF) & GST applicable to the bidder. Copy of applicable rate for ESI / EPF & GST shall be forwarded by the bidder alongwith bid documets cover 1. If the rate quoted by the bidder is lower than the applicable minimum wages + ESI / EPF + GST the same will be treated as 'Non-Bonafide' & the offer will not be considered for acceptance.

S&F in replacement single outlet hydrant valve size 63mm instantaneous, gun metal body, ISI marked with flanged inlet, CI hand operating wheel and end caps with chain complete all as specified and directed by Engineer-in-charge. Make :- Kartar / Leader

S&F in replacement double outlet fire hydrant valve size 63mm instantaneous, gun metal body, ISI marked with flanged inlet, CI hand operating wheel and end caps with chain complete all as specified and directed by Engineer-in-charge. Make :- Kartar / Leader

S&F in replacement of fire hose Box, double door with 4 mm thick glass, for storing two nos of 15 mtr hoses and one nozzle, made in 18 SWG CRCA sheet, weather proof, finished with red colour paint fixed on wall complete all as specified and directed by Engr-in-charge.

S&F in replacement Fire Hose, size 63 mm, ISI marked, 15 mtr long, with male and female coupling complete and conneted to existing system complete all as specified and directed by Engineer-in-charge.

S&F in replacement hose reel drum with stainless stell side body, swinging type, ISI marked, including seamless hose reel tube 30 Mtr long, size 19 mm dia. with nozzle and ball valve, fixed on wall with wall bracket and inlet connection complete complete all as specified and directed by Engr-in-charge.

S&F in replacement 65 mm instantaneous male pressure test cap gauge, copper alloy with bleeder valve complete all as specified and directed by Engineer-in-charge.

S&F in replacement fire hydrant branch nozzle, gun metal, 63 mm, complete all as specified and directed by Engineer-in-charge.

S&F in replacement 200mm dia butterfly valve complete all as specified and directed by Engineer-in-charge.

S&F in replacement 150mm dia butterfly valve complete all as specified and directed by Engineer-in-charge.

S&F in replacement 100mm dia butterfly valve complete all as specified and directed by Engineer-in-charge.

S&F in replacement Cast iron non return valve / reflux valve with rubber seat flanged type with by pass arrangement suitable for 100mm bore pipe, ISI marked, class PN-1.6 conforming to IS- 5312/2004 with stainless steel spindle, CI gate with brass nuts, bolts, washers and jointing with necessary ruber gasket etc complete all as specified and directed by Engineer-in-charge.

S&F LED indicators (colour red/yellow/blue/white/green) complete all as specified and as directed by Engineer in charge.

S&F in replacement of voltmeter (0-500) volts 96x96mm with electrical wiring complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of Ampmeter (0-50) volts 96x96mm with electrical wiring complete all as specified & as directed by Engineer-in-charge.

Supplying, laying & jointing in replacement submersible cable flat type, copper conductor of size 16 Sqmm, 3 core complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 17 here-in-above but 10 Sqmm 3 core.

All as per serial item No. 17 here-in-above but 6 Sqmm 3 core.

M&L for disconnecting all electrical and pipe line connection connected to Diesel Engine of capacity 69 bhp Make: Kirloskar Model Type: RB-44, 1500 RPM, unit carefully for finding out the defects and servicing including replcement of the unserviceable parts, fuel filter, air filter, oil filter, Fan belt, Hose pipe set, engine oil, coolent, bearings complete and refixing the same in original position couple with pumpset and connecting the pipe line testing complete all as directed by Engr-in-charge. Note: The rate inculdes the replacement of air filter, oil filter, fuel filter, fan belt, hose pipe, engine oil, coolent, bearing etc. Nothing extra shall be paid on this account.

S&F in replacement new lead acid battery, 12 volts, 180 AH, low maintenance with initially full charged alongwith electrolyte and testing complete all as specified & as directed by Engineer-in-charge. Make: Amaron/Exide

S&F in replacement battery lead connection made out of PVC insulated single core 25 sqmm size 1.5 mtr long inlcuding one end with copper lug and other end with a brass terminal with nut bolt and washer complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of industrial pressure switch for water flow system including control wiring complete all as specified & as directed by Engineer-in-charge. Make: Indfos

S&F in replacement of water pressure gauge stenless steel body for (0-220 psi) complete all as specified & as directed by Engineer-in-charge.

M&L for checking all electrical and control wiring for fire fighting electrical panel for smooth functioning and automatic start and stop of fire fighting system and rewiring of control system of presure switches, contactor of motor for c/f pump/ jockey pump and diesel engine and testing as per OEM complete all as specified & as directed by Engineer-in-charge. Notes: (i) The unit rate includes the replacement of minor parts like control copper wiring, lugs/ thimbles/ nut bolts, washer, dressing etc. Nothing extra shall be paid on this account. (ii) Replacement of major parts like, MCCBs, contactors, relay, timer, pressure switches, voltmeter, ammeter etc will be measured and paid seperately.

S&F in replacement of power contactor, AC3 rating, 200 Amps, 3 Pole, AC control with Auxiliary contacts NO/NC, adblock complete with all control wiring and including any alteration to existing panel for fixing of the contactors complete all as specified & as directed by Engineer-in-charge. Make: Schneider/ L&T/ Siemens

All as per item No 27 here-in-above but power contactor AC3 rating 160 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 120 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 95 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 65 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 40 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 32 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 25 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 12 Amps

All as per item No 27 here-in-above but power contactor AC3 rating 9 Amps

S&F in replacement of coil for contactor ML4 type complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of thermal over load relay adjustment range 66-110 amps with all electrical wiring complete all as specified & as directed by Engineer-in-charge.

All as per item No 38 here-in-above but adjustment range 48-65 Amps

All as per item No 38 here-in-above but adjustment range 17-25/ 23-32 / 30-40 / 37-50 Amps

All as per item No 38 here-in-above but adjustment range 12-18 Amps,

S&F in replacement of star delta timer 3 sec - 120 sec, 415 Volts with control wiring complete all as specified & as directed by Engineer-in-charge.

S&F In replacement of single phase preventor (SPP) with auto reset, 415 Volts AC, with control wiring complete all as specified & as directed by Engineer-in-charge.

S&F submersible pump controller fully star delta starter, in sheet-steel enclosure AC3 duty, 415 volts, 50 Hz, 3 Phase and relay 28-42 Amps with all electrical connection complete all as specified & as directed by Engineer-in-charge. Make: L&T cat ref. No SS95975 (MUG20H) / Schneider / Siemens

S&F in replacement of submersible pump contactor 25 Amps type MU2 complete all as specified & as directed by Engineer-in-charge. Make: L&T cat No CS94008 / Schneider / Siemens

S&F in replacement of submersible pump contactor 20 Amps type MU1H complete all as specified & as directed by Engineer-in-charge. Make: L&T cat No CS90623 / Schneider / Siemens

Taking out centrifugal pump upto 15/20/25/30 HP set by disconnecting from exisitng pipe network and motor and taking out from foundation and dismantling the pump set for servicing and replacement of unserviceable parts such as CI impeller, bush, ball bearing and other connected minor items including any welding, grinding and finishing work and reassembling,re-installing at same location and proper alignment and testing complete all as specified & as directed by Engineer-in-charge. Note : (i) Major Parts like CI impeller, Bush & ball bearing etc. will be measured and paid separately under respective items of BOQ as “Supply only” under respective items of BOQ. (ii) The cost of replacement of minor parts ike, nut/bolts, shaft key, rubber gasket and transportation to civil workshop is included in the unit rate of the item Nothing extra shall be paid on this account.

All as per item No 47 here-in-above item but pump set assemebled with motor 30/55 kW

Supply only CI impeller suitable for C/F pump set assembled with 15/20/25 HP motor

Supply only CI impeller suitable for C/F pump set assembled with 30/55 kW motor

Supply only stainless steel Bush suitable for centrifugal pump set assembled with 15/20/25 motor.

Supply only stainless steel Bush suitable for centrifugal pump set assembled with 30/35 kW motor.

Supply only ball bearing suitable for centrifugal Pump/ motor 15/20/25 HP capacity. Make : NBC / SKF / TATA

Supply only ball bearing suitable for centrifugal Pump / motor 30/55 kW capacity Make : NBC / SKF / TATA

Supply only gland rope of size 8/10/12 sqmm or as required size.

Taking out electric motor, 415 V, AC, cap upto 25 HP by disconnecting from exisitng pumpset including electrical connection and taking out from foundation and dismantling the same for servicing and replacement of unserviceable parts such as ball bearing, rewinding, teminal plate with coper, copper lugs/ washer, nut bolts etc and other connected minor parts and including any welding, grinding and finishing work on rotor and reassembling, re-installing at same location and proper alignment and all electrical connection and testing complete all as specified & as directed by Engineer-in-charge. Note : - (i) Major parts like bearing, terminal plate cover, rewinding if required for replacement shall be measure and paid seprately under respective items of BOQ (ii) Transportation of motor to civil workshop, if required, is included in the unit rate of items nothing extra shall be paid on this account.

All as per item No 56 here-in-above item but motor cap 30/50 kW.

Supply only ball bearing suitable for electric motor 15/20/25 HP capacity. Make : NBC / SKF / TATA

Supply only ball bearing suitable for electric motor 30/55 kW capacity Make : NBC / SKF / TATA

M&L for rewinding of electric motor cap 25 HP and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape with electrical connection complete all as specified & as directed by Engineer-in-charge.

M&L for rewinding of electric motor cap 30 KW and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape with electrical connection complete all as specified & as directed by Engineer-in-charge.

M&L for rewinding of electric motor cap 50 KW and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape with electrical connection complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of coupling assembly for flexible tyre suitable for centrifugal pump set assembled with 15/20/25 HP motor complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of coupling assembly for flexible tyre suitable for centrifugal pump set assembled with 30/50kW motor complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of flexible rubber tyre coupling suitable for centrifugal pump set assembled with 15/20/25 HP motor complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of flexible rubber tyre coupling for flexible tyre suitable for centrifugal pump set assembled with 30/50kW motor complete all as specified & as directed by Engineer-in-charge.

M&L for painting of centrifugal pump set of any capacity by nozzle spray with sythetic enamel weather proof good quality paint after preparing of old surface by srcapping/ rubbing and marking with MES NO. complete all as specified & as directed by Engineer-in-charge.

M&L for painting of fire fighting system (184 MH) complete inclduing piping network, hydrant, hose box and other conected items by nozzle spray with sythetic enamel weather proof good quality paint red colour or existing colour code after preparing of old surface by srcapping/rubbing and marking complete all as specified & as directed by Engineer-in-charge.

M&L for repair to chlorination pump set multistage type (5 stage) assembled with 1.5 kW 3 phase induction motor by dismentling and greasing oiling including replacment of unserviceable bearing, CI impaler (5 stage), bushes etc and assembling of the same and fixed in original positon complete all as specified & as directed by Engineer-in-charge.

Taking down of gas chlorinator by disconnecting from exisitng system and repair of semi automatic gas chlorinator (Make: Aqua) and making functional after replacement of unserviceable item and all re-connection with existing system complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of electronic water level indicator with 20%, 40%, 60%, 80%, 100% indication and over flow fully syron including electrical wiring for overhead tank and under ground sump complete all as specified & as directed by Engineer-in-charge.

S&F in replacement of PVC insulated PVC sheathed copper wire of size 0.5 sqmm 6 core fixed on wall or laid on floor, ceiling complete all as specified & as directed by Engineer-in-charge.

S&F in replacement rigid steel conduit of bore 20 mm dia fixed on over head tank wall and laid in ground wall complete all as specified & as directed by Engineer-in-charge.

S&F in replacement 25mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors / trenches complete all as specified & as directed by Engineer-in-charge.

S&F in replacement gun metal globe or gate valve 25mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and directed by Engineer-in-charge.

M&L for monthly Periodical maintenance and replacement of unserviceable alarm system/ spare parts of fire alarms cum detection systems installed at Military Hospital complete all as specified & as directed by Engineer-in-charge.

S&F in replacement addressable manual call point, resettable type, IP24, ISI marked with all electrical connection and fix on wallcomplete all as specified & as directed by Engineer-in-charge.

S&F in replacement fire alarm (bell), 24 V DC, ISI marked with all electrical connection and fix on wall complete all as specified & as directed by Engineer-in-charge.

S&F in replacement fire alarm panel, 16 zone matching with existing panel and control system with isolate and test function with all electrical connection and testing complete all as specified & as directed by Engineer-in-charge.

All as per item No 79 here-in-above but fire alarm panel 10 zone

All as per item No 79 here-in-above but fire alarm panel 8 zone

All as per item No 79 here-in-above but fire alarm panel 6 zone

Taking down fire alarm panel 3 zone for finding out the defects and repair work by replacement of unserviceable items as battery, swithces, display, microprocessor control card/ ICs/LED indicators etc. and other connected parts and refixing the same in original position complete and testing complete all as specified & as directed by Engineer-in-charge.

All as per item No 83 here-in-above but fire alarm panel 6 zone

All as per item No 83 here-in-above but fire alarm panel 8 zone

All as per item No 83 here-in-above but fire alarm panel 10 zone

All as per item No 83 here-in-above but fire alarm panel 16 zone

Supply only of dry cell battery 12 volt, 20/36 AH rechargeable for fire control panel as per existing make and model .

Supply only of smoke detector as per existing make and model and testing complete

Supply only of heat detector as per existing make and model and testing complete

Supply only of optical/photoelctrical fire detector as per existing make and model and testing complete as directed by Engr-in-charge.

Supply and laying the white silica sand filter media of effective size 0.5mm to 2mm as per the sample approved after removing old unserviceable silica sand filter complete all as specified & as directed by Engineer-in-charge.

Supply and laying the natural gravel pebbles of size 2mm to 6mm graded as per sample approved after removing the old pebbles complete all as specified & as directed by Engineer-in-charge.

M&L for repair to gear box of floculator by strip opening and servicing and greasing oiling complete and replacement of pulley with key assembly and reassembling and refixing of the same at original location and testing complete all as specified & as directed by Engineer-in-charge.

S&F in repair to belt for gear box V type anysize heavy duty, ISI marked complete all as specified & as directed by Engineer-in-charge. --------------------------------------------------------------------------------------------------------------------------------------- Note :- A sum of Rs. 16961/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 22 & 23 (Schedule of Credit) of Tender documents.

BHADU BUILDERS

J.M.D. CONSTRUCTION CO.

Gupta Suppliers

M/s Tiwari and Sons