GE(S)/M-15/2021-22

Amount

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete for securing RCC post and bed of manholes etc, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, benching haunching against the side of wall of manhole and similar works, finished even and smooth including necessary form work complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in landing, cover slab (for drain etc.) and similar articles with plain faces including chamfers, weatherings, throatings etc. and setting in CM 1:6 complete with joints to match including form work complete all as specified and directed. (Note:- Reinforcement shall be measured and paid separately under respactive item).

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brickwork built in any mortar, including removal of deberies out of MoD land complete all as specified and directed.

M&L brick work (Except bricks) with sub class 'B' bricks old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brickwork built in any mortar, including removal of deberies out of MoD land complete all as specified and directed.

M&L for walling of random rubble, uncourses, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed. (Note:- Pre-cast PCC bond stone shall be measured and paid separately under respective items after deductions from gross quantity of random rubble stone masonry).

Extra over stone walling built in lime or sand stone, for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc. 20mm and dressing of face beds and joints as specified of randam rubble walling jodhpur type, uncoarsed or brought upto courses complete all as specified and directed.

M&L for form work to sides of square, rectangular or polygonal, rough finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, forged into spikes; framed guared bars; barred iron doors; ladders; framed balusters; walk ways; railing; framed work of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for MS hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for concentina punch type wire 610mm dia of each coil average weight n. less than 1.06Kg/Rm after streching including coating of anti rust compound fixed on angle iron brackets top of compound wall complete all as specified and directed.

Labour only for taking down and refixing/ restraining resecuring including making good concentina punch type wire (any dia) fixed on angle iron brackets top of compound wall complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Labour only for restraining resecuring including making good staples etc. to existing galvanised 2 strand steel barbed wire complete all as specified and directed.

Supply only chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh and 3mm dia of wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for running welding 'as in repair" of steel gate metal n. exc. 6mm in thickness complete all as specified and directed.

M&L for welding in repair of steel gate metal exc. 2.5cm but n. exc. 5cm in length and n. exc. 6mm in thickness complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in sub floors fishing top with spike rolling complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.

M&L for Fly Ash glossy finished coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling floor, hearth or wall tiling complete all as specified and directed.

Description all as per srl item No 25.00 here-in-before but (EXCEPT CHEQUERED TILES) complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block, white cement layer coated with epoxy coating (Red/Yellow), built with grey cement and pigment of any shape and size, confirming to IS 15658-2006 (M-35 Grade) over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed.

Description all as per srl item No 27.00 here-in-before but (EXCEPT INTERLOCKING PAVER BLOCKS) complete all as specified and directed.

Filleting in any position n. exc. 25 Sqm and to any shape in cement mortar 1:4 including all mitres, stops etc. complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces in patches in cement mortar 1:4, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses of any description complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of old plastered surface after complete removal of existing treatment making the surface smooth and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for taking down and refixing of steel gate any size and type fixed in any position after necessary demolition of concrete/plaster/weld etc for carrying out minor repair/alteration by means of welding, greasing, etc. including re-fixing the gate in existing position complete all as specified and directed. (Note:- Quoted rates shall deemed to be exclusive of concrete, formwork, plastering, welding, painting which shall be measured and paid separately under respective item of BoQ.)

Demolition of (reinforced) cement concrete Concrete in coulmns/beams and pavings n exc 15 cm thickness (below or above ground level) including removal of debries from the site n. exc. 50m from starting point etccomplete all as specified and directed. (Note:- Reinforcement cut to facilitate demolition).

Demolition of (unreinforced) cement concrete Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debries from the site n. exc. 50m from starting point etccomplete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, ground masonry, etc. and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling wrough iron or mild steel work any type complete all as specified and directed.

M/S CANTILEVER ENGINEERS

AV ENTERPRISES

M/S D N CONSTRUCTION

Bidder Name

AV ENTERPRISES

M/S CANTILEVER ENGINEERS

M/s Ashoka Brothers

M/S D N CONSTRUCTION