Redevelopment of spray pond near P K Kelkar Library IIT Kanpur water fountain Works

Amount

WATER FEATURE - 01 (Geyser Jet + Overflow Type Water Feature)

Area - (771+66.3+30.64 = 868m2) + 28m2 = 896m2

Turnover - 7.5Hrs. @ 45m3/hr. flow filter

Design, drawing, Supply, installation, testing and commissioning of water features as shown in drawing comprising with the following:

NOZZLES

Floor Inlet Nozzle Adjustable - ABS

S.S Geyser Jet Nozzles - 25NB

Swivel Connector geyser Jet Nozzles - 25NB

Debris Collection Strainer SS-304 for main sump

65 mm Dia Overflow Skimmer

Dosing Pumps

SITC of Dosing Pumps capacity 0-6 lph with digital diaphragm, IP-65 protection & capable for adjusting flow rate including 100 ltrs HDPE tank

Filter

Providing and fixing Bobbin Wound FRP pressure sand filter top mounted multiport valve of 2" complete with initial charge of filter media, face piping, valves, pressure gauge, manual air vent, water purges accessories, water drain/empty drain for filter media, testing and commissioning complete.

Capacity : 45 m3/hr

Filtration Velocity : 40 m3/hr/m2

Size of Filter : 1200 mm dia

Working Pressure : 2.5 Kg/Sq.cm

Recirculation Pump

Supply, Installation, testing & commissioning of submersible pumps, C.I. casing for suitable rating with non-clog free flow open impeller, minimum solid handling 40 mm capacity with mechanical seal, temperature bi-metal sensor for motor protection in case of overheating suitable for operation on 415 volts + 5% -15%, 50 C/s A.C three phase supply, speed 2900 RPM with following specifications:

Capacity 97 m3/hr. @ 15 Mtrs head

Water Fall Pump

Supply, Installation, testing & commissioning of submersible pumps, C.I. casing for suitable rating with non-clog free flow open impeller, minimum solid handling 40 mm capacity with mechanical seal, temperature bi-metal sensor for motor protection in case of overheating suitable for operation on 415 volts + 5% -15%, 50 C/s A.C three phase supply, speed 2900 RPM with following specifications:

Capacity 33 m3/hr. @ 18 Mtrs head

Filter Feed Pump

Supply, Installation, testing & commissioning of submersible pumps, C.I. casing for suitable rating with non-clog free flow open impeller, minimum solid handling 40 mm capacity with mechanical seal, temperature bi-metal sensor for motor protection in case of overheating suitable for operation on 415 volts + 5% -15%, 50 C/s A.C three phase supply, speed 2900 RPM with following specifications:

Capacity 45 m3/hr. @ 24 Mtrs head

ELECTRICAL CONTROL PANEL

Supply, testing & commissioning of Cubical Control Panel made of 16 gauge CRC sheet powder coated with Starter, Single phase prevention, MCB, volt-meter, Amp meter, TP MCB's, Protection circuits etc complete indoor/out door type (Weather proof) control panel with starters for pumps with controlling MCB, stand/wall mounted manufactured from panel manufacturer.

INCOMING :

100 Amps 4P MCCB -- 01 Set.

Multifunction meter to read ammeter (0 - 150) Amp, Voltmeter (0-500)V, KW and KWH, A set of CT's, RYB LED type phase indication lights -- 01 Set.

OUTGOING :

B. 32 Amp. TP MCB- 02 Sets

C. 20 Amp. Single phase MCB- 03 Sets

D. 6 Amp. Single phase MCB- 03 Sets

MCC as described above.

uPVC PIPING

Providing, fixing, testing & commissioning of UPVC pipe Class IV 10kg/cm2 conforming to IS : 4985 including heavy duty fittings such as tees, crosses, plugh, elbow, reducers, flanges, union, sleeves, pieces, check nut complete:

u PVC Pipe OD 32(10 Kg/sq. cm.)

u PVC Pipe OD 40(10 Kg/sq. cm.)

u PVC Pipe OD 50(10 Kg/sq. cm.)

u PVC Pipe OD 63 (10 Kg/sq. cm.)

u PVC Pipe OD 75 (10 Kg/sq. cm.)

u PVC Pipe OD 90 (10 Kg/sq. cm.)

u PVC Pipe OD 110 (10 Kg/sq. cm.)

u PVC Pipe OD 160 (10 Kg/sq. cm.)

u PVC Pipe OD 200 (10 Kg/sq. cm.)

SUPPLY OF BALL VALVES WITH FITTINGS AS REQUIRED.

Providing and fixing brass lever operated Ball Valve of full flow with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 with union, flanges where as required.

Supply of 25 mm dia Ball Valve.

Supply of 32 mm Ball Valve.

SUPPLY OF BUTTERFLY VALVES WITH FITTINGS AS REQUIRED.

Providing and fixing C.I. Butterfly Valves, wafer end type class PN-10 with S.S disc without lugs lever operated, nitrile/EPDM rubber lining including necessary nuts, bolts, flanges, gaskets etc. complete in all respect.

Supply of 40 mm BFV

Supply of 50 mm BFV

Supply of 65 mm BFV

Supply of 80 mm BFV

Supply of 100 mm BFV

Supply of 150 mm BFV

SUPPLY OF CHECK VALVES/NRV WITH FITTINGS AS REQUIRED.

Providing and fixing C.I dual plate wafer type check valve PN-10 S.G Iron disc and nitrile/EPDM rubber lining including necessary nuts, bolts, flanges, gaskets etc. complete in all respect.

Supply of 50 mm NRV

Supply of 100 mm NRV

CABLE AND CONDUITING.

Supply, installation, testing & commissioning of 1.1 KV grade XLPE copper cable having outer sheath of fire retardent extruded (FRLS) compound as per specification in cable tray, hume pipe, cable trenches over a bed of sand, clamped to wall with suitable clamps, saddles complete in all respects

1.5mm2 - 3 Core Cu. Flexible

4.0mm2 - 4 Core Cu. Armored

6.0mm2 - 4 Core Cu. Armored

25mm Conduit for Cables

Providing, fixing, testing and commisioning of cable trays including nesessary accessories for fixing as required at site

M.S. Cable tray 100x40mm

GI Earthing wire 8 SWG

Providing & fixing M.S. structural work fabricated from standard section e.g. M.S Flat Strips, Round Bars, angles, channels, plates etc.. including cutting to size, drilling, welding, fixing either by welding to insert plates in RCC structural members including cutting and making good the walls, ceilings and floors or by dash fasteners including one coat of primer and two coats of enamel paints. (As per the Instructions of the Engineer in-charge)

COLORDESIGN INDIA

NAQVI BROTHERS

KSR BROTHERS