REPAIR OF TILES, FLOORING, WALL PANELLING AND ALL CONNECTED WORKS AT 190 MTN BDE AREA, APJD ZONG, MARATHA GROUND AND CHUJE GG UNDER GE TAWANG

Amount

Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

S&F galvanised corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with J or L bolt, complete all as specified and directed.

Fixing only galvanised, corugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc completed all as specified and directed.

Supply and fix pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

M&L for preparing of new steel galvanised surfaces of any description,over 10 cm width or girth,not otherwise described to receive painting by a coating with mordant solution incl washing and cleaning and two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling of wall and celling boards in any thickness incl cover fillets, complete all as specified and directed.

Dismantling boarding any thickness fixed in any position with nails, complete all as specified and directed.

M&L second class HW clean sawan boarding, 50mm thick, with butt joints ln any situation fixed with nails, complete all as specified and directed.

M&L for preparation of new wood or wood based materilas of surfaces any description and girth not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB fixed with nails with timber framework in wall only, complete all as specified and directed.

All as per item No 13 above but 4mm thick ply on ceiling, complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on plywood based materials of over 10cm width or girth, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even complete all as specified and directed.

Materials and labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate as in surface channels and drains complete all as specified and directed, complete all as specified and directed.

Materials andl labour for extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

M&L hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L for 15mm thck rendering on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, complete all as specified and directed.

M&L applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.

Materials and labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloure of tiles, complete all as specified and directed.

Materials and labour for 15 mm thick screeding of cement mortar (1:4) for fixing wall tiles as in dado/skirting, complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer ( for raising floor level), complete all as specified and directed.

M/S NAVA BHARAT BUILDERS

M/S MONYUL ENTERPRISES

M/S ARUNACHAL VIKASH

M/S RHEGON CONSTRUCTION

M/S K D CONSTRUCTION

M/S L G BUILDERS