REPAIR TO VOLTAGE STABILIZERS, AQUAGUARD, DG SETS AT VARIOUS STATIONS UNDER GE RANGIA

Amount

Comprehensive maintenance and cleaning, Greasing, Minor repairs to Diesel Engine set of 75KVA capacity including servicing of oil pump, water pump, adjustment of tappets, minor repairs of self starter and dynamo, minor repair of radiator with cleaning, repair to generator control panel by replacement existing burnt out of copper wire including repair/ replacement of toggle switches and its connected accessories, replacement of spares of gasket and joints etc. for DG set of capacity 75KVA to the entire satisfaction by the Engineer-in-Charge.

All as per serial item No. 1 above but for 63/62.5KVA DG Set.

All as per serial item No. 1 above but for 50 KVA DG Set.

All as per serial item No. 1 above but for 40 KVA DG Set.

All as per serial item No. 1 above but for 30 KVA DG Set.

All as per serial item No. 1 above but for 20 KVA DG Set.

All as per serial item No. 1 above but for 15 KVA DG Set.

All as per serial item No. 1 above but for 10 KVA DG Set.

Taking down the fuel Injection pump of Diesel Engine set of 75KVA capacity, dismantling the same for repair/Calibration and servicing of fuel injection pump including replacement of minor spare parts and oil seals if any, etc. including re-installating the same to its orginal position and checking, complete all as per specified and as directed by Engineer-in-charge. Note - Spares will be measured and paid separately.

All as per serial item No. 9 above but for 63/62.5KVA DG Set.

All as per serial item No. 9 above but for 50 KVA DG Set.

All as per serial item No. 9 above but for 40 KVA DG Set.

All as per serial item No. 9 above but for 30 KVA DG Set.

All as per serial item No. 9 above but for 20 KVA DG Set.

All as per serial item No. 9 above but for 15/10 KVA DG Set.

Supply only Spares for fuel injection pump of Diesel Engine set of 30 to 75 KVA capacity :-

(a) Injector Nozzle

(b) Element

(c) Delivery valve

(d) Service Kit

(e) Governer Repairing Kit

(f) Bearing

Supply only Spares for fuel injection pump of Diesel Engine set of 10 to 20 KVA capacity :-

(a) Nozzle

(b) Element

(c) Delivery valve

Supply only Set of anti-vibration rubber coupling bushes with stud bolts and nuts suitable for 50 to 75 KVA capacity DG sets.

Supply only Set of anti-vibration rubber coupling bushes with stud bolts and nuts suitable for 10 to 40 KVA capacity DG sets.

Repair/Replacement of safety devices for DG set such as water temperature meter, Hour Meter, oil pressure meter, water temperature sensor, LO pressure sensor, vacuum indicator for following DG sets :-

Supply of following spares parts for 75 KVA capacity DG sets :-

(a) Fuel Filter element

(b) Flexible pipe

(c) Filter cartridge

(d) Set of high pressure pipe

(e) L,O Filter cartridge

(f) Flex pipe for lub oil

(g) Thermostat

(h) Cooling water pipe

(j) set of hoses

(k) set of hose clip

(l) Set of flexible fuel pipe

Supply of following spares parts for 62.5/63 KVA capacity DG sets :-

(a) Fuel Filter element

(b) Flexible pipe

(c) Filter cartridge

(d) Set of high pressure pipe

(e) L,O Filter cartridge

(f) Flex pipe for lub oil

(g) Thermostat

(h) Cooling water pipe

(j) set of hoses

(k) set of hose clip

(l) Set of flexible fuel pipe

Supply of following spares parts for 50 KVA capacity DG sets :-

(a) Fuel Filter element

(b) Flexible pipe

(c) Filter cartridge

(d) Set of high pressure pipe

(e) L,O Filter cartridge

(f) Flex pipe for lub oil

(g) Thermostat

(h) Cooling water pipe

(j) set of hoses

(k) set of hose clip

(l) Set of flexible fuel pipe

Supply of following spares parts for 40 KVA capacity DG sets :-

(a) Fuel Filter element

(b) Flexible pipe

(c) Filter cartridge

(d) Set of high pressure pipe

(e) L,O Filter cartridge

(f) Flex pipe for lub oil

(g) Thermostat

(h) Cooling water pipe

(j) set of hoses

(k) set of hose clip

(l) Set of flexible fuel pipe

Supply of following spares parts for 30 KVA capacity DG sets :-

(a) Fuel Filter element

(b) Flexible pipe

(c) Filter cartridge

(d) Set of high pressure pipe

(e) L,O Filter cartridge

(f) Flex pipe for lub oil

(g) Thermostat

(h) Cooling water pipe

(j) set of hoses

(k) set of hose clip

(l) Set of flexible fuel pipe

Supply of following spares parts for 20 KVA capacity DG sets :-

(a) Air cleaner

(b) L.O filter element

(c) Fuel filter with water seperator

(d) Fuel filter element

(e) Coolant inhabitor

(f) Thermostat

(g) L.O Filter cartridge

(h) Resistor corrosion

Supply of following spares parts for 10/15 KVA capacity DG sets :-

(a) L.O Filter element

(b) Micro filter element

(c) Prefilter element

(d) Flex pipe

M&L for preparation of old painted body surface of 75/62.5/63 KVA DG set and applying two coat of synthetic enamel paint as per colour code to the body of DG set and alternator and red colour to the belt guard including writing MES/SM Nos, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 28 above but for 30/40KVA capacity DG set.

All as per serial item No. 28 above but for 10/20KVA capacity DG set.

Supply and fix V-belt for any drive suitable for DG set of capacity 10 to 75 KVA, complete all as specified and as directed by Engineer-in-charge.

M & L for repair of exhaust manifold by replacement of worn out silencer unit of required size and shape suitable for DG set of capacity 10 KVA to 20 KVA, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 32 above but for 30 to 75KVA capacity DG set.

M & L for cleaning of fuel tank of DG sets from 10KVA to 75 KVA capacity by draining out diesel and cleaning internally with the help of cleaning agent and compressed air, drain out the sludge/foreign matter deposited inside the diesel tank, complete all as specified and as directed by Engineer-in-charge.

M&L for reconditioning of lead acid battery of capacity 100/180 AH 12 volt capacity by replacing the damaged cell, separator and filling diluted electrolite of appropriate concentration and charging, complete all as per specified and as directed by Engineer-in-charge.

Taking out old unserviceable battery charger and supply and fix battery charger suitable for charging lead acid battery 6/12volt boost and trickle charging mode, 230 volt single phase complete with charging lead connecting clip, complete all as per specified and as directed by Engineer-in-charge.

M & L changing/topping up of engine lubricating oil 20W40, complete all as per specified and as directed by Engineer-in-charge.

M & L for repair of self starter 12 volts (other than minor fault) suitable for 10 to 75 KVA DG sets by replacing the defective worn out parts including testing, complete all as per specified and as directed by Engineer-in-charge. Note - Spare parts shall be measured and paid separately.

Supply only following spare parts of self starter 12 Volts suitable for 10 to 75 KVA DG Sets of make-KIRLOSKAR :-

(a) Armature, 12 Volts

(b) Field Coil

(c) Bendex pinion

(d) Clutch Plate

(e) Solenoid Switch

M & L for repair of Dynamo 12 volts including replacement of the defective wornout parts including connecting and testing, complete all as per specified and as directed by Engineer-in-charge. Note - Spare parts shall be measured and paid separately.

Supply only following spare parts of Dynamo 12 Volts suitable for 10 to 75 KVA DG Sets of make-KIRLOSKAR :-

(a) Armature, 12 Volts

(b) Field Coil

(c) Dynamo cut out

(d) Bearing

Supply only distilled water for lead acid cell 12 Volt, complete all as per specified and as directed by Engineer-in-charge.

Supply and replacement of Automatic Voltage Regulator suitable for DG sets of Capacity 40/50/63/62.5/75 KVA, complete all as per specified and as directed by Engineer-in-charge.

AC VOLTAGE STABILIZER/UPS M & L for repair to AC voltage stabilizer of capacity 0.50 KVA to 2.0 KVA by removing burnt out entire copper winding from coils and rewinding of the same coil with super enameled copper wire of appropriate gauge as per original including providing insulation paper, cotton tape, varnishing heating, reassembling and testing, complete all as per specified and as directed by Engineer-in-charge.

All as per serial item no 44 above but for 3.15 KVA voltage stabilizer.

All as per serial item no 44 above but for 4 to 5 KVA voltage stabilizer.

S & F in repair of MCB, SP, 240 Volts, 50 Hz, 32 Amps single phase, complete all as per specified and as directed by Engineer-in-charge.

M&L for repairing & overhauling of Voltage Stabilizer of 1.0 KVA Capacity of any make including replacement of Relay, Capacitors, Switches, Voltmeters and Testing, complete all as per specified and as directed by Engineer-in-charge.

M&L for repairing & overhauling of Voltage Stabilizer of 3.0/4.0/5.0 KVA Capacity of any make including replacement of Relay, Capacitors, Switches, Voltmeters and Testing, complete all as per specified and as directed by Engineer-in-charge.

M & L for repair of AC servo-voltage stabilizer of capacity 20 KVA to 25 KVA by removing burnt out entire copper winding from coils and rewinding of the same coil with super enameled copper wire of appropriate gauge as per original including providing insulation paper, cotton tape, varnishing heating, copper lugs and nuts and bolts etc. and reassembling and testing, complete all as per specified and as directed by Engineer-in-charge.

M&L for repairing & overhauling of servo-voltage stabilizer of 20 to 25 KVA Capacity of any MAKE including replace-ment of Relay, Capacitors, Switches, Voltmeters and Testing, etc., complete all as per specified and as directed by Engineer-in-charge.

M&L for rewinding of Isolator transformer of capacity 6.5KVA, 360Volt, DC with 10SWG copper wire of 20 KVA UPS including providing insulating materials like as PVC sleeve, cotton tape, copper lugs and nuts and bolts etc. as required and varnishing, complete all as per specified and as directed by Engineer-in-charge.

M&L for topping up of transformer oil of di-electric strength more than 50KV in servo voltage stabilizer, complete all as per specified and as directed by Engineer-in-charge.

Dismantling, transporting to work shop for repairing/rewinding of Isolator Transformer (R,Y & B) of capacity 6.5 KVA 360 Volts with copper wire10 SWG including providing insulating materials like as PVC sleeve, cotton tape, copper lugs and nuts and bolts etc., as required and varnishing complete from Authorized uniline coy workshop as per specified and as directed by Engineer- in- Charge.

Supply and fix in repair maincard for 20 KVA UPS of make "Uniline", complete all as per specified and as directed by Engineer-in-charge.

Supply and fix in repair driver module 13-013 for 20 KVA UPS of make "Uniline", complete all as per specified and as directed by Engineer-in-charge.

Supply and fix in repair driver module 100A/1200V for UPS of make "Uniline", complete all as per specified and as directed by Engineer-in-charge.

AQUA GUARD Taking down aqua guard from its position by disconnecting electric connection and separate the usefull components for reuse in the same work and repair/replace the unserviceable components complete all as specified and as directed by Engineer-in-Charge. Note - Spare parts shall be measured and paid separately.

Supply only following spare parts of Aqua Guard as per original make :-

(a) PF Candle 10” (DIY)

(b) PAC block

(c) AC block

(d) Activation carbon

(e) Photo resistor

(f) PCB rect (exchange basic) hi flow

(g) Solonoid valve

(h)Sensor nut

(j) UV lamp G20T5 (HI FLOW)

(k) PCB assy (hi flow facia) rect (exchange basis)

(l) Heavy metal remover cartridge assy

(m) Eva tube kit

(n) Transformer (inova)

(o) Carbon block

(p) Eva Pipe 2Mtr long

(q) Togle Switch

(r) PF candle steek

REVERSE OSMOSIS (R.O) PLANT Taking down R.O. of capacity 15/25 ltr/hour from its position by disconnecting electric & water connections, servicing the same by cleaning the filters with the help of clean water and compressed air as required, dismantling the unserviceable part/componentscomplete all as specified and as directed by Engineer-in-Charge. Note - Spare parts shall be measured and paid separately.

Supply only following spare parts of R.O plant as per original make :-

(a) Sediment filter

(b) Low pressure switch

(c) Activated carbon filter

(d) Solenoid valve

(e) Booster pump

(f) TDS Control valve

(g) RO membrane

(h) Flow restrictor Tube

(i) UF Membrane

(j) Non return valve

(k) High pressure switch

(l) Post carbon filter

(m) SMPS unit

(n) UV equaliser with UV lamp

Disconnecting AC supply, dismantling, taking down and opening 100 to 500 KVA ON LOAD servo-stabilizer and replace unserviceable parts such as contact bush, mechanical tap moving system, filtration of oil, topup new oil, servo motor, carbon busher assembly with carbon and repair/maint/replacement of PC board, indicator, transformer etc. and other minor parts found defective during repairing & Re-assembling the same after repairing including commissioning and testing complete all as specified and as directed by Engineer-in-Charge. Notes 1. Spare parts shall be measured and paid separately. 2. New oil, filtration of oil will be measured & paid under appropriate item of Sch 'A'.

Supply only following spare parts of 100 to 500 KVA ON LOAD Servo Stabilizer as per original make :-

(a) Repair/replacement of indicator of different colour.

(b) Repair/replacement carbon busher assmbly with carbon of suitable size & type or as per existing.

(c) Repair/replacement/rewinding buckbook transformer of suitable size & capacity or as per existing.

(d) Repair/replacement PCB (printed circuit board) of suitable size & capacity or as per existing.

(e) Repair/replacement PCB connector of suitable size & capacity or as per existing.

(f) Repair/replacement servo motor of suitable size & capacity or as per existing.

(g) Repair/replacement digital volt meter.

(h) Repair/replacement copper lugs of suitable size or as per existing size.

(j) Repair/replacement low cut switch of suitable size & capacity or as per existing.

(k) Repair/replacement high cut switch of suitable size & capacity or as per existing.

(l) Repair/replacement carbon set of suitable size & type or as per existing.

(m) Repair/replacement R C network of suitable size/type & capacity or as per existing.

(n) Repair/replacement/rewinding dimmer of suitable size & capacity or as per existing.

Disconnecting AC supply, dismantling, taking down and opening Servo stabilizer having capacity 3x50KVA to 3x75KVA. Servicing, repair/replacement unserviceable parts such as contact bush, mechanical tap moving system, filtration of oil, topup new oil, servo motor, carbon busher assembly with carbon and repair/maint/replacement of PC board, indicator, transformer etc and other minor parts found defective during repairing including re-assembling the same after repairing, commissioning and testing, complete all as specified and as directed by Engineer-in-Charge. Notes 1. Spare parts shall be measured and paid separately. 2. New oil, filtration of oil will be measured & paid under appropriate item of Sch 'A'.

Supply only following spare parts of Servo stabilizer having capacity 3x50KVA to 3x75KVA as per original make :-

(a) Repair/replacement of indicator of different colour.

(b) Repair/replacement low cut switch of suitable size & capacity or as per existing.

(c) Repair/replacement high cut switch of suitable size & capacity or as per existing.

(d) Repair/replacement R C network of suitable size/type & capacity or as per existing.

(e) Repair/replacement carbon set of suitable size & type or as per existing.

(f) Repair/replacement carbon bush of suitable size & type or as per existing.

(g) Repair/replacement/rewinding dimmer of suitable size & capacity or as per existing.

(h) Repair/replacement/rewinding buckbook transformer suitable size & capacity or as per existing.

(J) Repair/replacement copper lugs of suitable size or as per existing size.

(k) Repair/replacement PCB (printed circuit board) of suitable size & capacity or as per existing.

(l) Repair/replacement PCB connector of suitable size & capacity or as per existing.

(m) Repair/replacement servo motor of suitable size & capacity or as per existing.

(n) Repair/replacement triger transformer of suitable size & capacity or as per existing.

(o) Repair/replacement digital volt meter. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S Rajkamal Enterprise

Bidder Name

M/S NARAYAN ENTERPRISE

M/S Rajkamal Enterprise