PAINTING TO CERTAIN BUILDING IN TECHNICAL AND DOMESTIC AREA AND REPAIR TO SEWAGE LINE AND CONNECTED WORK AT AF STN JAISALMER

Amount

15mm thick plaster in cement mortar (1:4) on external wall surface finished even & fair without using extra cement including taking down old plaster complete all as specified and directed.

15mm thick plaster in cement mortar (1:6) on internal wall surfaces finished even & smooth, without using extra cement including taking down old plaster complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) in chajjas etc including demolition of existing cement concrete complete all as specified and as directed

Use and waste of form work to faces of chajja through and similar item rough finished surface of concrete complete all as specified and as directed .

TMT reinforcement bars 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of ceiling including finishing the surface even and smooth without using extra cement including taking down old plaster complete all as specified and as directed

Preparation of new plastered surfaces of ceilings of any description and applying three coat of white wash complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer as approved complete all as specified and directed.

Preparation of new plastered surface of any description and applying two coats of oil emulsion distemper including chalk whitening preparatory to distempering of wall as approved etc complete all as specified and directed.

Preparation of old plastered surfaces of walls of any storeys/any height of any description and applying one coat of cement base paint approved shade/tint after removal of existing treatment by washing, rubbing down and stopping of painted surface complete all as specified and as directed .

Preparation of old plastered surfaces of walls of any storeys/any height of any description and applying two coats of cement base paint approved shade/tint after removal of existing treatment by washing, rubbing down and stopping of painted surface complete all as specified and as directed .

Preparation of old surface ( plastered or un plastered ) of wall including cornices, pilasters etc f any storeys/any height of any description including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of celing including cornices, pilasters etc f any storeys/any height of any description including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of wall including cornices, pilasters etc f any storeys/any height of any description including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of oil bound distemper complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of wall including cornices, pilasters etc f any storeys/any height of any description including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying two coats of tinted oil bound distemper complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of celing including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of tinted oil bound distemper complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of exterior emulsion paint (Apex) on surface of wall surface/floor surface any colour as approved by GE complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) including cornices, pilasters etc o including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying two coats of exterior emulsion paint (Apex) on surface of wall /floor surface any colour as approved by GE complete all as specified and directed.

Painting to old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed .

Painting to old steel surfaces surface of any description not otherwise described over 10 cm in width or girth including preparation of already primed surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed .

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 15cm high and 2.50cm width with thick synthetic enamel paint of approved tint complete all as specified and directed.

Chequered cement concrete tiles 25cm x 25cm x 22 mm-25 mm thick with grey cement and pigment, set , jointed and pointed in neat cement slurry in floor over and including 15 mm thick screed bed in cement and sand mortar 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and as directed .

60mm thick coloured machine pressed with grey cement and with pigment interlocking factory made paver blocks rubber moulding of any size and shape conforming to IS 15658-2006, M-35 set, jointed and pointed in dry sand over including 25 mm thick sand cushion including dismantling of existing with cement mortar bedding complete all as specified and as directed .

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floors including finishing the top surface of concrete even and rough complete all as specified and as directed .

Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in lcoping, benching of manhole, cill, bed block, coping ,bed plate, bond stone etc including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed

50 mm thick jalli in Precast reinforced cement concrete 1:2:4 type B-0,using 12.5 mm graded aggregate and setting in cement and sand mortar 1:4 etc fixed in repair complete all as specified and as directed

Preparation of old treated/ decorated external wall/roof surfaces of any storeys/any height of any description and applying two coats of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified and directed.

Preparation of old treated/ decorated external wall/roof surfaces of any storeys/height more than 10m of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified and directed.

10mm thick plaster in cement mortar (1:6) on stone /concrete block masonary wall surfaces finished even & smooth, without using extra cement including taking down old plaster complete all as specified and directed.

Applying wall care putty to a smoth finish on wall surfaces complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide or n exc 10 sqm in plan area and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed .

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified.

150mm bore reinforced concrete pipe, class NP2, laid and jointed with collars, laid and jointed on concrete bed complete including testing, after demolition and breaking up existing drain pipes set in cement mortar including bedding haunching complete all as specified & as directed.

P:C:C 1:4:8 type D-2 using 40 mm graded stone aggregates as in beds of NP2 pipe 150 mm bore, laid to required slope including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge Note: - (i) Thickness of concrete bed below the barrel of pipe shall be 10cm. (ii) Pipe shall be measured & paid for separately. (iii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets/collars) plus 30cm. (iv) The rate includes for all necessary shuttering and support to concrete and for laying beds to falls.

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:4) including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

10mm thick plaster in cement and sand mortar (1:3) on concrete surfaces or masonry surfaces as in manholes, gully traps and finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

Plain cement concrete (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete including demolition of existing complete all as specified and directed.

Pre cast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab supported on walls for manholes, septic tanks etc and set in cement and sand mortar (1:6) including demolition of existing slab complete all as specified and directed

Mild steel TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

SFRC manhole covers with rectangular frame of size 44"x26" thickness 4.75" and cover size 40"x22" thickness 2.75" with 36"x18" clear opening MD-10 fixed including dismentling of old manhole cover slab complete all as specified and directed.

Jodhpur stone roof slab, self faced 7.50cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement and sand mortar 1:3 including demolition / removal of existing stone slabs any thickness complete all as specified and directed.

Removal of blockage in between WC and nahani trap/WC to Ist manhole / floor trap to nahani trap etc. by flexible roding and removal the all dirt up to a distance of 100 metre complete all as specified and directed. Note : (i) In case a blockage reoccured with in 7 days the same shall be removed without any extra cost of the Govt. (ii) Cleaning of line in between manhole where in the blockage remove shall deemed to incl the rate coated. (iii) If contractor failed to clear the blockage with in 24 hours from the receipt of complaint, a penalty of Rs. 50 per day will charge up to 7 days and after 7 days same will be Rs. 100.00 till completion of complaint.

Dewatering of septic tank/soakage well/ grease trap of any size and any depth by pumping with trolley mounted pump sets including carrying the waste water in closed containers and unloading it out side the MoD land. Note for srl item No 45.00 to 51.00: (i) Pump for cleaning of any capacity and pressure as required for cleaning of septic tank ,manhole, sewer line shall be deemed to included in the quoted rates. (ii) Proper safety of operater/labour during operation shall be deemed to included in the quoted rates.

Cleaning and desilting of manhole of any size and capacity or description but depth not exceeding 1.50 metre by excavation sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside the MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manholes, placing the cover of manholes in position and removing the sludge in covered van/trolley out side in MD land complete all as specified and directed.

Cleaning and desilting of manhole of any size and capacity or description but depth exceeding 1.50 metre but not exceeding 3.00 metre by excavation sewage wet/dry soil in foul condition and removing the waste in covered vehicles (van/trolley) outside the MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manholes, placing the cover of manholes in position and removing the sludge in covered van/trolley out side in MD land complete all as specified and directed.

Cleaning and desilting of manhole of any size and capacity or description but depth exceeding 3.00 metre but not exceeding 4.50 metre by excavation sewage wet/dry soil in foul condition and removing the waste in covered vehicles (van/trolley) outside the MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manholes, placing the cover of manholes in position and removing the sludge in covered van/trolley out side in MD land complete all as specified and directed.

Cleaning of solid/ liquid mud deposited in under ground sewage line upto and including 150mm bore of any type between consecutive manholes by hydraulic jet pressure machine, through connecting manholes, complete men, machine and water as required including removal and refixing of manholes covers complete all as specified and directed. Note : The contractor shall arrange safaiwala immediately as receipt of complaint and ensure that complaint is resolved within 24 hours and no lapses will be allowed.

Cleaning of solid/ liquid mud deposited in under ground sewage line 200mm to 300mm bore of any type between consecutive manholes by hydraulic jet pressure machine, through connecting manholes, complete men, machine and water as required including removal and refixing of manholes covers complete all as specified and directed. Note : The contractor shall arrange safaiwala immediately as receipt of complaint and ensure that complaint is resolved within 24 hours and no lapses will be allowed.

M/s RKG CONSTRUCTIONS

M/S BHATI TRADERS