17. Improvement to Hansua right embankment from Rankei to Tandikul

Cleaning and grubbing road land including uprooting wild vegetation grass, bushes, shrubs, saplings & trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto lead of 1000mtr. including removal and disposal of top organic soil not exceeding 150mm in thickness including hire charges of all machinery and equipment (in area of light jungle) etc. complete as per direction of the Engineer-in-Charge.

Earth work in any approved type of soil except sand and sandy soil from approved borrow area after stripping the surface to required depth, loading into transport vehicles, carriage of earth by mechanical means, unloading the earth within lead of 4.00 Km on properly prepared and scientifically approved surface (trimming the surface, removing the debries, benching the old embankment & levelling to proper profile), spreading the earth in layers not exceeding 22.50 Cm in height, rough dressing & breaking the clods to maximum 5 to 7 cm in size and dressing the embankment to proper level and profile, including all taxes, royalty, EMF, DMF, Addl. Charge & cess etc. as per direction of the Engineer-in-Charge. (Measurement to be taken on finished complete embankment section and arranging borrow area is the contractors responsibility)

Earth work excavation, loading, unloading and carriage by mechanical means of all kinds of soil, including stony earth, gravel and moorum etc. interspread with boulders upto 1/2cum size with all leads, lifts and delifts including trimming of slopes and bed to design section and depositing the excavated materials away from the worksite by mechanically with all leads, all other taxes as applicable and including labour cess etc. complete as per the specification and direction of the Engineer-in-charge.

Ordinary compaction of earth work by PRR including cost of hire & running charges of PRR,cess and all taxes as applicable etc.comp as per direction of Engineer-in-charge.

Collecting, supplying & stacking of moorum and sand and at work site for pre-measurement in a regular box heap of size (1.50m x 1.50m x 0.50m) be measured as one cum and admixing moorum & sand in (60 : 40) ratio with all labours, T & P etc. complete then laying sub-base in layers not exceeding 100mm watering & compaction to required density with PRR including cost of all materials, carriage, royalty, EMF, DMF & Addl. Charge & all labour charges etc. complete as per direction of the Engineer-in-Charge.

Collecting supplying and stacking at work site crusher broken hard granite metal 63mm to 45mm size confirming to IRC Gr-II metal and conveying from stacking and spreading 0.91 cum metal on road surface including filling the interstices with 0.22 cum of moorum per each 10Sqm road surface to provide 75mm thick compacted WBM road surface including providing necessary camber, watering & rolling by PRR with cost, conveyance, royalty, EMF, DMF & Addl. Charge with all taxes of all materials etc complete as per the direction of the Engineer-in-Charge

Fine dressing and truffing the slope of the embankment with compact Duba Grass with two extra lead over the initial lead of 50m and the initial lift of 1.5m, watering till survival of truf including all labour taxes etc. all complete as per direction of the Engineer- in- Charge.