Automation based operation and maintenance of tube-wells, Rising main and Chlorination etc. work for 3 years in water supply (Zone-3), Greater Noida

Amount

Part-A (Repairing & Maintenance work)

Maintenance of water supply tubewell in Urban area of Greater Noida including re-winding of submersible pump motor from 15 H.P. to 25 H.P. (including lowering & lifting of motor) including labour, T&P and material complete in all respect. (Total Nos of Tubewells - 19 Nos)

Maintenance of water supply tubewell in Urban area of Greater Noida including re-winding of submersible pump motor from 41 H.P. (including lowering & lifting of Pump motor) including labour, T&P and material complete in all respect. (Total Nos of Tubewells - 06 Nos)

Supply and replacement of Bush

Supply and replacement of Thrust Plate

Supply and replacement of Impeller

Supply and replacement of Difuser

Supply and replacement of Shaft

Supply & fixing Submersible water proof copper cable (Flat Bunch Wire)

4C x 16 Sqmm

Supply and installation of fuse set unit 100 Amp (03 Nos fuse in each set)

Repairing of Pannel:

Supply and replacement of Relay (Over Load Relay)

Supply and replacement of Connector ML 3

Supply and replacement of Connector ML 4

Supply and replacement of 3 Phase 100 Amp MCCB L&T Make

Chlorination of drinking water including supply & mixing of sodium hypo chloride (liquid chlorine) in such quantity to get 0.2 PPM chlorine at tail end including repairing of chlorine dosing equipment/Plants.

Repairing of rising main leakage with cutting the existing leakage of CI/DI/MS pipe line (including excavation and filling, D-Joint, M.S. gap piece, Nut bolt, rubber and T&P etc.) complete in all respect. (AR/GNIDA)

150mm dia

200mm dia

250mm dia

300mm dia

400mm dia

500mm dia

Supply and installation of MS column pipe 150mm dia (Double flanged type) of 3 Mtr length and 10mm thickness (including packing, nut bolt etc.)

Repairing of C.I. sluice valve (including joints, nut bolt, packing, change of gun metal sleeves, change of spindle and cartage etc. (Complete in all respects.)

150mm dia

200mm dia

250mm dia

300mm dia

400mm dia

450mm dia

500mm dia

600mm dia

Providing & fixing MS pipe specials fabricated from M.S. Sheet heavy class as per directions of Engineer-in-charge as per site requirement (Approved Rate)

Part-B (Automation work)

IESWR M-integrated Electronic System for Water Reservoir Management for remote monitoring water level of UGR or OHT. It also can interface with IESWRM-OP to automatically control the water pumps/tube wells remotely located from the UGR or OHT (Including Automatic Starter, Pannel).

Scope or works: (a) Automatic Start/Stop of water pumps depending on the water level of the O.H.T./UGR (b) Remote & Local Monitoring of the water level in the overhead tank/UGR. ( c) Logging of events such as start/stopping of the pump, 3 phase power supply faulty. (d) Water pump in Auto or manual mode. (e) Auto generate of a detailed report for further analysis.

GPRS Data SIM for each Automation Unit

Operation & maintenance of Automation plant water reservoir management for remote monitoring water level of UGR or OHT. It also can interface with IESWRM-OP to automatically control the water pumps/tube wells remotely located from the UGR or OHT (including Automatic starter & pannel maintenance, Manpower, required material etc. complete in all respect). for Third year

Scope or works: (a) Automatic Start/Stop of water pumps depending on the water level of the O.H.T./UGR (b) Remote & Local Monitoring of the water level in the overhead tank/UGR. ( c) Logging of events such as start/stopping of the pump, 3 phase power supply faulty. (d) Water pump in Auto or manual mode. (e) Auto generate of a detailed report for further analysis.

Part-C (Supply and Installation work)

S/F of K.S.B. make submersible pump set, capacity 1500 LPM at 54m delivery head, 25 H.P. model no. BPH333/47HB253C suitable for true bore well of 350mm dia housing capable of pumping of cold and clear water not chemically attacking to pump construction material directly coupled to electric motor 2900 RPM operating on 400 + 5% volts, 3 phase 50Hz. A.C. supply with bronze impeller and C.I. non return valve with 3.0 mtr core submersible cable.

Supply and installation of Push Button Starter 25 HP L&T Make (M.R.)

Providing and fixing C.I. sluice valve (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

150 mm diameter: Class-II (DSR-13/18.31.3.2/P-324)

250 mm diameter: Class-II (DSR-13/18.31.5.2/P-324)

300 mm diameter: Class-II (DSR-13/18.31.6.2/P-324)

400 mm diameter: Class-II (DSR-13/18.31.6.2/AR/GNIDA)

500 mm diameter: Class-II (DSR-13/18.31.6.2/AR/GNIDA)

Part-D (Staff for watch and ward of water supply plant)

Wages of care taker for watch & ward of pumping plant, complete operation of water supply, operation of valves, DG set and all other relevant equipment to water supply, (For each Tubewell/O.H.T. or both one care taker in each shift.)