SPECIAL REPAIR TO FIRE FIGHTING SYSTEM, DISTRIBUTION NETWORK AND FIRE ALARM SYSTEM VIDYA AND VIJAYA FIRE FIGHTING PUMP AT NOFRA AREA UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI

Amount

Supply and replacement, installation, testing & commissioning of addressable micro processor based 2 wire fault tolerant loop, required loop net workable type Single loop (each loop accessing maximum 99 detectors and 99 modules) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault signal with address. The panel shall have rectifier, loop cards, LCD display unit to indicate Fire/Fault signal with address. The panel shall have a built in power supply and battery charger alongwith maintenance free SMF lead acid batteries as per manufacturers design with battery charger complete as required and as per specifications duly approved by EN 54 complete including making connections all as specified and directed by Engr-in-Charge. Make :- Morley-IAS by Honeywell model Name/Number. DXc2/ 714-001-225 or Bosch model No. FPA-1000-V2 / Apollo model No. Elite RS 10860-10

Supply and fix in repair Addressable manual call point resettable type complete all as specified and directed Make :- Morley-IAS by Honeywell/Bosch/Apollo

Supply and fixing in repair red colour PVC insulated PVC sheathed armoured copper conductor cable of size 2 Core x 1.5 Sqmm including fixing on walls with saddles not more than 60 cm intervals complete all as specified and directed by the engineer-in-charge.

Supply and fix in repair Addressable sounder range 900 dbl with strobe complete all as specified and directed Make :- Morley-IAS by Honeywell/Bosch/Apollo

Supply and fixing in repair detectors Complying with and type certified to EN - 45 Addressable type optical multi Sensor detector heat and smoke combination Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed by the engineer-in-charge. Make :- Morley-IAS by Honeywell/Bosch/Apollo

Supply and fixing in repair addressable fault Isolator suitable for fire alarm system complete all as specified and directed by the engineer-in-charge. Make :- Morley-IAS by Honeywell/Bosch/Apollo

Supply, installation, testing and commissioning of FM approved and UL listed addressable control module to provide FACP a circuit for notification appliances (e.g. Horns, Strobes, Horn Strobes, etc.) having built-in type identification, integral LED indicators, high noise immunity, SMES screws with clamping plates for wiring ease, direct-dial entry of address, etc. complete all as specified and directed by engineer-in-charge. (Power shutdown to all lifts other than Fire lifts in case of fire alarm).

Material & Labour for earthing complete with galvanized earth plate 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below normal ground level connecting with 4 mm dia GI wire by means of bolts nuts, check nuts and washers of galvanized iron all shown in electrical plate No 03 of SSR Part-I including necessary excavation earth work using PCC 1:2:4 for earthing pit and pit cover with handle of 8mm dia MS rod and connected to test point all as specified and directed by the engineer-in-charge. Note : (a) The item rate inclusive of fixing of earth continuity conductor from earth plate upto 7.5 mtr. (b) The item rate inclusive of provisioning necessary charcoal and salt upto the level of the earth plate in alternate layers.

Material & Labour for earthing complete with galvanized earth plate 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below normal ground level connecting with 25 x 4 mm GI strip by means of bolts nuts, check nuts and washers of galvanized iron all shown in electrical plate No 03 of SSR Part-I including necessary excavation earth work using PCC 1:2:4 for earthing pit and pit cover with handle of 8mm dia MS rod and connected to test point all as specified and directed by the engineer-in-charge. Note : (a) The item rate inclusive of fixing of earth continuity conductor from earth plate upto 7.5 mtr. (b) The item rate inclusive of provisioning necessary charcoal and salt upto the level of the earth plate in alternate layers.

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed by the engineer-in-charge.

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on FRP insulators or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 x4 mm galvanised iron or steel strip complete all as specified and directed by the engineer-in-charge.

Supply, install testing and commissioning of Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988, Size (mm) Suction x delivery : 80 x65 mm With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz 35mtr head, 900 LPM discharge including PCC foundation not less than 20 CM height, pump fixed on angle iron base frame from the manufacturer size and model with vibration pads, PVC insulated and sheathed three core cable of suitable size from starter to pump and Fibre sheet 2 mm thickness for shed not less than 4 sqm with angle iron as required at site for protection of pump from rain and water complete all as specified and directed by the engineer-in-charge. Make :- Kirloskar Model No. KDI-1555+ CI MS SS IP55 FCL or equivalent in CG Note :- The item rate also includes PCC foundation, Fibre sheet, angle iron frames, Pump base frame, vibration pads, grouting of nut bolts and three core cable from starter to pump as required at site including testing.

Supply and Fix MCCBs 40 Amp 3 pole 415 volts, 16KA, 50 HZ including factory made SS enclosure fixed on wall and making connections complete all as specified and directed

Supply and fixing MCB double pole 16 Amps, 10 KA, 'C' series with factory made SS enclosure fixed on wall and making connections complete all as specified and directed by the engineer-in-charge.

Supply and fixing in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 4 core fixed on wall with steel saddles as approved by Engineer-in-Charge.

Supply and laying in replacement of spigot and socket ductile iron water tubing,class K-9, 100 mm dia cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329: 2000, including rubber joint of suitable size laid on roof/floor/trenches with proper alignment as per site requirement and carryout testing against leakage before filling the trenches etc complete all as specified and directed by the engineer-in-charge.

Supply and laying in replacement of spigot and socket ductile iron water tubing,class K-9, 150 mm dia cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329: 2000, including rubber joint of suitable size laid on roof/floor/trenches with proper alignment as per site requirement and carryout testing against leakage before filling the trenches etc complete all as specified and directed by the engineer-in-charge.

Supply & fix in repair 100 mm dia ERW MS pipe heavy grade including MS fittings confirming IS-1239 and applying two coats of synthetic enamel paint over a coat of red oxide primer to pipe including welding, supporting brackets as required at site complete all as specified and directed by the engineer-in-charge. Note : Rate deemed to be inclusive of bituminous wrapping and coating as per IS 15337:2003 for 100 mm NB pipes if required to be laid under ground . Make:- Jindal /Tata /Sail

Supply & fix in repair 80 mm dia ERW MS pipe heavy grade including MS fittings confirming IS-1239 and applying two coats of synthetic enamel paint over a coat of red oxide primer to pipe including welding, supporting brackets as required at site complete all as specified and directed by the engineer-in-charge. Note : Rate deemed to be inclusive of bituminous wrapping and coating as per IS 15337:2003 for 80 mm NB pipes if required to be laid under ground Make:- Jindal /Tata /Sail

Material & Labour for fabrication of MS gate made of 2 mm thick MS Sheet 1950 mm (H) X 800 mm (L) lockable door type hinged at one side for opening with wire net type opening 1 mm thick at centre glasses and door frame made of 2 mm MS sheet painted fire red out side and brilliant white inside yard fixed on wall with necessary nuts/bolts or welding to existing MS pipe by supporting angle complete all as specified & directed.

Supply & fix in repair rubber hose pipe red in colour 30 mtr,20mm dia plain 2 ply rayon confirming IS-12585 braided high pressure complete all as specified and directed by the engineer-in-charge. Make:-Minimax / Safex /Dunlop Note :- Rate is inclusive of shutoff nozzle and shank reducer and providing all possible connection for testing

Supply & fix in repair hose Reel drum with mounting base plate company made suitable for 30 mtrs X 20 mm dia rubber hose pipe complete all as specified and directed by the engineer-in-charge. Make:-Minimax/Safex/Dunlop

Supply & fix in repair canvas fire hose red in colour 63mm bore 15 m long confirming to IS 636-1988 having male/female brass coupling both end complete all as specified and directed by the engineer-in-charge. Make:-Minimax/Safex/Dunlop

Supply & fix in repairs Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle complete all as specified and directed by the engineer-in-charge. Make :- Minimax / Safex / Dunlop

Supply and fix in replacement of Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of two nos 63 mm dia instantaneous type male coupling with built in check valves and 80 mm dia, flanged outlet complete with all accessories.

Supply & fix in repair double headed outlet hydrant valve 100mm having 65mm outlet with lock pin wheel complete all as specified and directed by the engineer-in-charge. Make:-Minimax/Safex/Dunlop

Supply & fix in repair single headed outlet hydrant valve 100mm having 65mm outlet with lock pin wheel complete all as specified and directed by the engineer-in-charge. Make:-Minimax/Safex/Dunlop

Supply & fix SMC PANEL TANK confirming to Panel must be ISI Marked and have ISI Logo with CML and Batch Number along with ISI Code.(ISI 14399 Part-1 & Part-11-2006) of the under mentioned size (3mt x 2mt x 1mt) and capacity (06 KL.) Made out of HOT PRESS MOULDED SHEET MOULDING COMPOUND (SMC) Panels of size 1005mm X 1005 mm. The flange should be perpendicular to the main surface. The shape should be Trunk Type for extra strength and 90 degree flanges predrilled for bolting. All the Flanges of the Panel should have maximum 13 Nos. holes for fastening/joining the panels to one another. Hot Pressed Moulded SMC Pre Drilled Corner Pieces with built-in ribs of the size 75mm X 75 mm should be provided for 90 degree joints of tank walls or wall to base or wall to roof joints complete Hot Dipped Galvanized (HDG) hardware nuts, bolts and washers. Special sealant having excellent UV Resistance as well as suitable for portable water, complete with Top Covered construction having Man-Hole with Cover of Dia 600mm and internal FRP Ladder. The tank after erection and assembled as per Manufacturer Specification's shall be filled with water upto overflow level, which will be placed near the roof of the tank and test for leakages rectified any leakage found during the testing should be rectified to make it 100% leak proof complete as per direction of Engineer-in-Charge. (ISI Logo & CML number must be printed on all Panels). NOTE: (i) Rate quoted shall deemed to be inclusive of internal and external ladder made out of FRP/ Pultruted Section. MS supporting channels and necessary PVC profile including FOUNDATION, GRILLAGE, UNLOADING, SHIFTING & OTHER CIVIL COMPONENT IN CLIENT SCOPE. Including demolition/dismantling of Storage tank.

Supply & fix in repair sluice valve (ISI Marked) 150mm size both ends flanged with high tensile stainless steel spindle, I body as per IS-14846, ISI Marked,PN-1.6 including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed by the engineer-in-charge.

Supply & fix in repair sluice valve (ISI Marked) 100mm size both ends flanged with high tensile stainless brass spindle, I body as per IS-14846, ISI Marked,PN-1.6 including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed by the engineer-in-charge.

Supply & fix in repair Non return valve (ISI Marked) 150mm size both ends flayed with high tensile stainless steel spindle, I body including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed by the engineer-in-charge.

Supply & fix in repair Non return valve (ISI Marked) 100mm size both ends flayed with high tensile stainless steel spindle, I body including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed by the engineer-in-charge.

Supply and fixing in repair steel galvanised pipes medium grade, ISI marked of size 50 mm dia including necessary fittings as required at site complete all as specified

Supply and fixing Ball brass valves (ISI Marked) 50 mm, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed by the engineer-in-charge.

Material & Labour cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of CI pipes, foundation and hardstanding finishing even and fair without using extra cement all as specified and directed by the engineer-in-charge.

Supply and fix in repairs in existing line, CP brass gate valve 50 mm bore with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified and directed by the engineer-in-charge.

Supply and fix in repair/replacement by using Fe-410-W(Gde?E-250) quality?B for Compound girders and stanchions, lattice girders, aerial masts,staging for water tanks , ladders, and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, nuts, bolts, washers etc. including necessary fabrication work with hinges, handle and applying two coats of synthetic enamel paint over one coat of metal primer complete all as specified.

Supply and installation of water flow switch suitable for fire fighting system, pipe size 100 mm dia , operating pressure, withstand pressure as per manufacturer recommendations, including cutting, clamping, welding , control wiring , connecting and testing with all all accessories/items required at site and testing complete all as specified and directed by the engineer-in-charge. Make :- Honey well model No. WFS-1001-H or Morley-IAS/Bosch/Apollo

Supply and installation of Pressure gauge 4" dial 0-14 kgs rating complete all as specified and directed by the engineer-in-charge.

Material & Labour in repair for Pressure switch Universal type with suitable pressure range having die cast aluminium construction and SS sensing element with ball valve, fittings viz. unions, collars, reducers etc.existing header for fire pumpsets, wiring up to Motor Control Centre complete all as specified and directed by the engineer-in-charge.

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal two stage continuous normal operation for at least 50 minutes with sound level 65 db to 120 db Measured at 1.5 m with sound output variation of + 5 db 1500m range complete all as specified and directed by the engineer-in-charge.

Construction of brick masonery valve chamber in repair of size 1.2 x 1.2 x 1.2 M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, 15mm thick, finished even and smooth, without using extra cement, 8 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified.

Material & Labour in repairs for CI/DI specials conforming to IS - 1538& 9523, spigot /socket or flanged fitting I.e. bend, tee, collar, flanged/ socket /spigot, Tappers, flanges and tail pieces etc suitable for 100/150/200/250/300 mm bore CI/DI pipes (joints and joining material shall be measured and paid seperately)

Supply and fix in repairs CI foot valve 100 mm (4") dia flanged end IS 4038 PN 0.2 housing complete including replacement of nut bolts, cutting of pipe, welding complete all as specified and directed by the engineer-in-charge. Make :- Kirloskar/ Sant/Zoloto

Supply and fixing Jockey pump horizontal end suction centrifugal type Confirming to IS- 12469: 1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 70 m head 180 LPM discharge complete all as specified and directed by the engineer-in-charge.

Providing and fixing (E.R.W. pipe conforming to IS 1239) with ISI mark with screwed or welded joints, including all fittings(R Brand/Kirti), supported by galvanized hangers(size and spacing as per drawing) including anchor fasteners for fixing in ceiling testing to 15 kgs/cm2 pressure , painting with a coat of Zinc Dichromate primer and two coat of approved enamel paint, making direction arrows and labelling etc. complete. (Pipes 65mm and above diameter will be welded and pipes 50mm and below will be screwed jointed)

A. 65 mm dia

B. 40 mm dia

C. 25 mm dia

Providing and fixing paddle type flowswitch (Switzer/Danfoss) on pipes with welded socket including stainless steel paddle suitable to pipe dia. 150mm to 25 mm testing and commissioning etc. complete.

Supply and fix suitable C.I. air release valve(Zoloto/ZIP) 20 mm dia, flanged ends ISI marked with all accessories and as per IS-14845 including 2 nos flanged joints complete with jointing material such as 3 mm thick rubber gasket, nuts, bolts, washers complete all as specified and directed by the engineer-in-charge.

Providing and fixing approved quartezoid bulb 15mm dia sprinkler pendent type, IS No 15106 (Tyco/Viking/Spraysafe) chrome plated with rossette plate, with temperature rating 68 degree. C , with universal deflector as approved by T.A.C. complete with all necessary connections.

Supply and fix pressure gauge 4"dial 0-21 kgs rating complete all as specified.

Supplying and fixing in position drain / test assembly comprised of 2 nos. 65mm dia brass tested heavy duty ball valves with screwed ends confiming to IS 554 with ISI marked, including necessary G.I. 'C' class pipes, union(1 no) & site glass fitting etc. complete.

Cleaning of underground sump of any capacity 2.00 lakh Ltrs cleaning the floors, wall and ceiling portion of sump etc by Mechnical high pressure spray and steel wire brush to remove Algae/dirt/foreign dirt completely and soaking out the water/dirt with a high pressure wet vaccum pump and removing spoils out side of MD land land distance exc 5 KMs & n.exc 10 KMs and applying spray of approved chemical etc. complete all as specified and as directed by Engineer-in-charge . Note :- 1. Rates deemed to be included for pumping out water left below foot valve. 2. Rate include the painting of two coats of enamal paint with visible colour and capacity of sump about date of cleaning and due date for cleaning complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and debris out side MD land all as specified.

Supply and laying in replacement of spigot and socket ductile iron water tubing,class K-9, 300 mm dia cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329: 2000, including rubber joint of suitable size laid on roof/floor/trenches with proper alignment as per site requirement and carryout testing against leakage before filling the trenches etc complete all as specified and directed by the engineer-in-charge. Make :- Jindal/Sri pipes/Tata/Lanco/Electro steel

Supply & fix in repair sluice valve (ISI Marked) 300mm size both ends flanged with high tensile stainless brass spindle, I body as per IS-14846, ISI Marked,PN-1.6 including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed by the engineer-in-charge.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc.

Material &Labour for sand filling under floors or in foundation including watering and consolidation etc complete.

Material &Labour Machine pressed precast colour glazed concrete interlocking paver block with grey cement & pigment glossy finish (reflective type)any shape and size (as approved by GE ) confirming to IS 15658-2006of 60 mm thickness, M-35 grade, as in pavements to required level & gradients set, jointed with clean dry sand sealing the ends using PCC 1:2:4 etc complete.

Supply and fixing bitumens patchment on damaged road not exceeding 15 cm depth and make well ramming complete all as specified and directed

Supply, Installation, testing and commissioning Diesel Engine driven fire pump horizontal end suction with discharge 1620 LPM , head 70 m at 1800 RPM, 58 HP engine. Pump Construction: Pump With Diesel Engine Component Material -Casing Material: Ductile Iron 65-45-12 Impeller Material: Bronze LTB2 Shaft Material: S.S AISI 410 Seal Material: Gland Packing Wear Ring Material: Counter Flange Material: Accessories Base Frame & Coupling: Pipework Connection Suction & Discharge Flange Rating: PN 16 Casing Connection: Without Suction & Discharge Flanges Driver Specifications Engine Cooling System: Radiator Cooled Engine Rating: 58 HP - 1800 RPM - 12V - Eicher Fire Pump Specifications - NFPA 20 Compliance Diesel Tank With Accessories: 100 litre capacity, stand for Tank Battery With Cable & Lugs: 12V , Stand for battery Battery : 1 Nos.: Battery Charger: 12V Engine Mount Control Panel Suction & Discharge Pressure Gauges: Make of Engine : Cummins/Greaves Cotton/Ashok Leyland/Kirloskar Make of Pump : Kirlskar/ABB/CG/Jyothi/Mather & Platt

Supply and fix in repair 150 mm bore hand operated butterfly valve (ISI marked) of pressure not less than 15 Kg / Sqcm with complete set

Supply and fix in repair 100 mm bore hand operated butterfly valve (ISI marked) of pressure not less than 15 Kg / Sqcm with complete set

Supply & fix in repair 150 mm dia ERW MS pipe heavy grade including MS fittings confirming IS-1239 and applying two coats of synthetic enamel paint over a coat of red oxide primer to pipe including welding, supporting brackets as required at site complete all as specified and directed by the engineer-in-charge. Make:- Jindal /Tata /Sail

Material & Labour for Disconnecting motor power cables of various sizes from electrical motor of different capacities and decoupling from the pump sets,removing and taking down carefully and transporting to authorised workshop ,Dismantaling stator and rotor carefully and rewinding stator assembly with supper enamelled copper winding wire of suitable gauge matching to existing gauge and cleaning of slots ,core with carbon tetra chloride solution and apply two coats of insulation varnish and keep stator assembly in heating chamber to improve insulation strength ,reassemble motor completey and transporation to site ,coupling pump to motor and check for proper shaft alignments such that no vibratiobn produce during opertion coupling to pump with exact allinment ,connect power cables to motor including painting of pump motor and testing of following capacity motor

Supplying, installing, testing and commissioning of MS air cushion tank, conforming to IS 4736:1968 on top of each riser fabricated from 6 mm thick MS plate, 200 mm in diametre and 1.2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25 mm NB valve, pressure gauge with gun metal stop cock including taking down old and u/s air cushion tank complete all as specified and directed by the Engineer-in-charge.

Supply, installation, testing and commissioning of FM approved and UL listed intelligent monitor module, with built-in type identification automatically identifying the device as addressable monitor module to the FCAP, to supervise a circuit of dry-contact input devices, viz. flow switch of sprinkler line, powered directly by two-wire SLC loop, high noise immunity, SEMS screws with clamping plates for ease of wiring, direct-dial entry of addresses, LED indicators, etc. complete all as specified and directed by the Engineer-in-charge.

Material & Labour for Sign board of size 300mm X 150mm reading 'EXIT' in 12.5mm block letters in green and white background, properly spaced to provide good legibility located directly in corridor near to each staircase and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level complete all as specified and directed by the Engineer-in-charge.

Material & Labour for Sign board of size 450mm X 150mm reading 'FIRE POINT' in 12.5 mm block letters in white and red background, properly spaced to provide good legibility located directly in corridor near to each Manual call point/Fire Extinguisher and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level complete all as specified and directed by the Engineer-in-charge.

Supply and fixing Ball valves (ISI Marked) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms including necessary GI fittings as required at site i.e. elbow, reducer, nipple etc complete all as specified and directed for 40 mm sizes.

Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr in depth and getting out in soft/ loose soil all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil all as specified.

Removing excavated material exc 250m but n.exc 500m and depositing where directed all as specified.

ASHOK ENTERPRISES (BID ID -3287750)

Nexus Infratech (BID ID -3289497)

Idustrial products India (BID ID -3288168)

sapana enterprises (BID ID -3288997)

Chakshu Enterprise (BID ID -3288310)

DARSHAN CONSTRUCTION Co. (BID ID -3289302)