PROVISION OF 5 TOILETS

Amount

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified

Material & Labour for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed

Material & Labour for brick work with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified

Removing Excavated soils not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point.complete all as specified and as directed

Material & Labour 40mm thick cement concrete 1:2:4 type B-0 using 12.5mm stone aggregate for Damp proof course to horizontal or vertical surfaces including necessary formwork as directed and specified

Material & Labour for RCC 1:2:4 Type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified

Material & Labour for reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified

Supply & Fixing precast cement concrete type B0 1:2:4 ( 12.5 mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings and frames complete all as directed and specified

Material & Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified

Material & Labour formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished flat surface complete all as specified

Material & Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

Material & Labour Mild steel TMT bar 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to, as in stirrups, spaces and binders complete all as specified

Material & Labour for cement plastering 15mm thick in internal cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

Material & Labour for preparation of newely plaster surfaces on wall and applying two coats of cement based paint on external plastered surfaces all as specified.

Material & Labour for preparation of newely plaster surfaces on internal wall and applying three coat of white wash on plastered surfaces all as specified.

Material & Labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed

Supply & Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed

Supply & Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and as directed

Supply and fixing for butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply & Fix 150mm aluminium handles, cast type, anodised complete all as specified and as directed

Supply and fixing for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed

Material & Labour for hardcore of broken stone or boulders exc 63mm but n exceeding. 100mm, deposited, spread and levelled in layers n exceeding 15cm thick, watered and rolled/rammed to a true surface, complete all as specified

Material & Labour for 100 mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in sub base of floor all as specified.

Material & Labour for 40mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate as floor finish complete all as specified

Material & Labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified

Material & Labour for glazed ceramic coloured tiles in vertical surfaces such as skirting,dados and riser to steps etc size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick plaster CM (1:4) complete all as specified.

Supply & Fix of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified

Material & Labour for 100mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified

Supply & Fix in PVC(HDPE) SWR RWP 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified

Supply & Fix in 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Material & Labour for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

Cutting chases ,pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills, sunshades, shelves, lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified.

Material & Labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified

Supply and fixing for ISI marked 15mm bore bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

Supply & Fix for 500 Litres rotational moulded polyethylene water storage tanks triple layered white in colour ISI marked with float valve (cylindrical/ vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified

Supply & Fix Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified

Supply & Fix Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

Supply & Fix viterious china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified.

Supply & Fix10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified.

Supply & Fix in repairs vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm white , with integral foot rests completely all as specified and directed.

Supply & Fix Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe completed all as specified and directed.

Material & Labour for 15 mm ball brass valves , high pressure , with polythene float and flynut complete , screwd for iron pipe or brass ferrule and fixed as specified and directed

Supply & Fix Soap dish, any type, fixed to plugs with chromium plated brass screws completed all as specified and directed.

Supply & Fix for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink / Urinal etc complete all as specified.

Supply & Fix of Angle valve 15mm bore stop valve, fancy type, brass chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed

Supply & Fix brass chromium plated tublar towel rail, 20mm dia, D type 60cm long between flanges completed all as specified and directed.

Supply & Fix grating doom 100mm dia of PTMT (min weight 25gms) complete as specified and directed

Material & Labour for 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection. Completef all as specified and directed

Material & Labour for 25 mm thick Cement concrete type C2, 1:2:4 (using 20 mm graded stone aggregate) in plinth protection. Completef all as specified and directed

Material & Labour Point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable for mounting modular switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable FRLSH of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for One light/ fan/ Bell point controlled by one switch Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting PVC conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.

All as per Serial Item No 56.00 here-in-before but for one socket outlet 5 Amps on the same board with other switches complete all as specified and directed .

Supply & Fix Modular switch one way 6A , 1 Module type single pole 240 volts complete all as specified

Supply & Fix Socket 6A- 2/3 pin combined 2 Module complete all specified.

Supply & Fix LED tube light fitting (including LED tube) 1 X 20W 230 Volt surface and wall mounted LED batten, extruded aluminium housing provided with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size fixed on wall/ceiling complete all as specified and directed.

Supply and fixing in replacenment Modular Angle holder with insulated body with back plate for LED lamps all as specified and directed

Supply and fixing in LED lamp 9 watt, retrofit all as specified and directed

Supply and fixing mirror light fitting LED 10W, 230 V, 2ft complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed

Supply and fixing MCB SP 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed

Supply & Fix Sheet metal enclosure MCB SPN distribution board, double door, IP 53 class, including suitable size copper bus-bar, 240V,4 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.

Supply and fixing MCB SPN 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed

Supply and fixing Bulk Head LED 10W, 230 V, 2ft complete all as specified and directed

Material & Labour Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame etc.complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering Metal complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed

Cutting of existing CI/DI/GI or any existing size of pipe line and inserting tee for taking branch connection all as directed including threading excavation and earth work etc. complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia all as specified and directed

Labour for boring underground upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified.

Material & Labour for Construction of brick masonary valve pit of size 380 mm x 380mm x 450 mm (Internal size) with 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primar complete all as specified and as directed

Supply and fix in Gun Metal gate valve with Iron wheel head screwed both ends for GI steel tubing 25 mm dia complete all as specified and directed

Supply,laying,jointing,testing LT cable, XLPE insulated,PVC insulated armoured, with aluminium conductor ,1100V grade complete all as specified and directed for 2 core 6 sq mm. complete all as specified and as directed

Supply,laying,jointing,testing LT cable, XLPE insulated,PVC insulated armoured, with aluminium conductor ,1100V grade complete all as specified and directed for 2 core 16 sq mm.

Material & Labour for sand cushioning (drysand) to under ground cable for cable protection provided with layers 8cm deep before laying and 15 cm after laying the cable complete all as specified and as directed

Material & Labour for laying in trenches as cable protection cover class LV, type I, flat size 250mm x 150mm x 40mm complete all as specified and as directed

Supply and lay pipe galvanized, “Light Grade”, including fittings 50 mm dia for protection of cable complete all as specified and as directed .

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp / suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed

Supply and fix cable route indicator made up of Aluminium Cast Material, 100mm dia, round with 5-6mm thick, height minimum 300mm, two hole for ,mounting 3mm embossed letter as per appropriate like LT cable with paint of suitable colour , proper finishing and smoothing of surface with suitable foundation complete all as specified and as directed

Material & Labour for RCC NP3 150mm diameter pipes laid on 150mm thk bed with excavation in any type of soil, including manhole/drop manhole of standard size (0.7x1.65M) made of brick masonsry /RCC/pre-cast RCC with with SFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional complete all as specified and as directed

Material & Labour for Construction of conventional type septic tank for 20 users to carry sewage and sullage water, (excavation in any type of soil) PCC 1:4:8 below foundation vent shaft, connection etc complete all as specified and as directed ad shown on drawing

S M BUILDERS (BID ID -3111400)