Loading
Loading…
Loading…
Tender Value
₹7.2 Cr
EMD Value
₹5.1 L
Closing Date
30 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or " V" whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully or substantially completed any of the following during last 07(seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar Nature of work for this tender is -"Any work involving outdoor Signaling work."
1 condition
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Reliability Improvement for Replacement of Over Due Relays, LEDs on age cum condition basis at ASTE-RPH Section.
SDSTE-RELAY-LED-RPH-26
SDSTE-RELAY-LED-RPH-26
Open
Works - General
12 Months
Howrah, West Bengal
₹0
₹5.1 L
30 Mar 2026
2 Mar 2026
16 Mar 2026
208 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 7,21,87,186.02 | ||
| — | — | — | 6,00,390 | ||
| Supply of Q-Series Magnetically Latched Neutral Line Relay (QL1 Type), 11F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips and conforming to BRS- 935A and RDSO Specn.No. IRS: 5-34 & S-23with Amdt. upto date as applicable or latest. The interlocking code for this unit shall be "ABDEG". Inspection authority:- RDSO | — | 105.00 | — | — | |
| — | — | — | 1,27,280 | ||
| "Supply of Relay fail safe electronic time delay device with fixed timing (0 -120) seconds and conforming to RDSO Specn. No.IRS: 5-61/2000 with Amnd.2 and IRS: S-34 & S-23 with Amdt. up to date or latest mounted on Q-series relay base & covered complete with connectors, retaining clip etc. The interlocking code for this unit shall be ""AFGKY"". Inspection authority:- RDSO" | — | 80.00 | — | — | |
| — | — | — | 29,47,200 | ||
| Supply of Q-Series LED ECR (Universal Type i.e. QECX- 61), 4F/4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS:94 1A STS/E/RELAYS/AC LIT LED SIGNAL/09-2002, Amdt. -1 and RDSO Specn.No.IRS: S-34 & S-23 with Amdt. upto date as applicable or latest. The interlocking code for this unit shall be "ABDHK".Inspection authority:- RDSO | — | 600.00 | — | — | |
| — | — | — | 38,45,000 | ||
| "Supply of Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn. No.IRS: S@45"44@ S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"". Inspection authority:- RDSO" | — | 1000.00 | — | — | |
| — | — | — | 40,07,000 | ||
| "Supply of Q-Series Line Relay (QNA1 Type), AC immunized, 12F/4B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn.No.IRS: 5@45"44@ S-23 and 5-60 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be ""ABDFH"". Inspection authority:- RDSO" | — | 1000.00 | — | — | |
| — | — | — | 30,15,200 | ||
| Supply of Q-Series Neutral Line Relay (QN1 Type), 12F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS- 930 and RDSO Specn.No.IRS: S-34 & S-23 with Amdt. upto date or latest. The interlocking code for this unit shall be "ABCDE". Inspection authority:- RDSO | — | 800.00 | — | — | |
| — | — | — | 22,89,000 | ||
| "Supply of Q-Series Track Relay (QTA2 Type), AC immunized, 9 Ohms, 2F/1B along with plug board (base plate), connectors, retaining clips etc and conforming t o BRS:939A & 966(Appendix F2) and RDSO Spec No. IRS:S 34, S-23 with amdt. upto date as applicable or latest with latest amdt. or latest. The interlocking code for this unit shall be ""FGHKX"". Inspection authority:- RDSO " | — | 600.00 | — | — | |
| — | — | — | 10,46,000 | ||
| Supply of Q-Series Neutral Line Relay(QSPA1 Type), 24V DC,8F/4B along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-933A and RDSO Specn.No.IRS:S@45"44@ 5- 23 & S 60 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be "ABDEJ". Inspection authority:- RDSO | — | 200.00 | — | — | |
| — | — | — | 13,68,400 | ||
| Supply of Contactor Unit (QBCA 1 Type), 24 V DC, 2F(HD)/ 4B or 2F(HD)2F-4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS- 943 and RDSO Specn.No.IRS: 5-34 & S-23 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be "BCEJK" or "DEHJX". Inspection authority:- RDSO | — | 200.00 | — | — | |
| — | — | — | 25,08,600 | ||
| Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO/SPN/ 199/2010(Rev.1) or latest. Inspection: RDSO A)RED Aspect | — | 300.00 | — | — | |
| — | — | — | 30,19,320 | ||
| Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO/SPN/ 199/2010(Rev.1) or latest. Inspection: RDSO B)YELLOW Aspect | — | 360.00 | — | — | |
| — | — | — | 28,40,838 | ||
| Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO/SPN/ 199/2010(Rev.1) or latest. Inspection: RDSO C)GREEN Aspect | — | 301.00 | — | — | |
| — | — | — | 12,05,160 | ||
| Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest. Inspection: RDSO A)LED for Route Aspect | — | 220.00 | — | — | |
| — | — | — | 11,35,000 | ||
| Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest. Inspection: RDSO B)LED for Shunt Signal Aspect | — | 200.00 | — | — | |
| — | — | — | 4,78,100 | ||
| Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest.Inspection: RDSO C)LED for Calling ON Signal Aspect | — | 70.00 | — | — | |
| — | — | — | 58,050 | ||
| "Supply of 1 X 2.5 Sqmm (36/0.3) (Green) multi strand copper power wire as per IS:694:2010 or latest, Inspection: Consignee" | — | 1720.00 | — | — | |
| — | — | — | 840 | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 6 sqmm, Barrel Inner-dia: 4.0mm, Barrel Outter-Dia: 5.5mm, Barrel Length: 10mm, Stud Hole Center-dia: 8.2mm, Palm Width: 10.0mm, Thickness: 1.3-1.5mm, Lug Length: 24mm,Thimble Type: Ring. Inspection: Consignee" | — | 280.00 | — | — | |
| — | — | — | 1,120 | ||
| "Supply of Tinned Copper LUGs for fitting Cable Size: 10sqmm, Barrel Inner-dia: 4.7mm, Barrel Outter-Dia: 7.10mm, Barrel Length: 10mm, Stud Hole Center-dia: 9.9mm, Palm Width: 12.6mm, Thickness: 1.8, Lug Length: 27mm,Thimble Type: Ring. Inspection: Consignee" | — | 280.00 | — | — | |
| — | — | — | 925.2 | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 16 sqmm, Barrel Inner-dia: 6.4mm, Barrel Outter-Dia: 8.0mm, Barrel Length: 12.2mm, Stud Hole Center-dia: 10mm, Palm Width: 12.6mm, Thickness: 1.8, Lug Length: 28-30mm,Thimble Type: Ring. Inspection: Consignee" | — | 180.00 | — | — | |
| — | — | — | 824 | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 35 sqmm, Barrel Inner-dia:13 mm, Barrel Outter-Dia: 17 mm, Barrel Length: 12.2mm, Stud Hole Center-dia: 10mm, Palm Width: 12.6mm, Thickness: 1.8, Lug Length: 28-30 mm,Thimble Type: Ring. Inspection: Consignee" | — | 80.00 | — | — | |
| — | — | — | 1,290 | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 2.5 sqmm, Barrel Inner-dia: 2.4mm, Barrel Outter-Dia: 3.90mm, Barrel Length: 8mm, Stud Hole Center-dia: 5.2mm, Palm Width: 9mm, Thickness: 1.3-1.5mm, Lug Length: 17-19mm,Thimble Type: Ring. Inspection: Consignee" | — | 860.00 | — | — | |
| — | — | — | 16,520 | ||
| "Supply of Copper Strip 25X6 mm Inspection: Consignee " | — | 20.00 | — | — | |
| — | — | — | 1,53,400 | ||
| "Supply of Copper tape for BRC ( 25X2) mm. Inspection: Consignee" | — | 520.00 | — | — | |
| — | — | — | 4,47,279 | ||
| "Supply of Earthing powder ( Earth Enhancement Material ) as per Para 8.2 of RDSO Spn. No. RDSO/SPN/197 or latest Note :- Minimum weight of Bag should be of 10 KG. Inspection: Consignee " | — | 7980.00 | — | — | |
| — | — | — | 26,904 | ||
| "Supply of Nut Bolts, Washer (Stainless Steel) as per the site requirement (One set consists of 1 Nut, 1Bolt , 2 washer & 2 spring washer) Note :- Hex Nuts, bolts and washers of size 5/16"" Inspection: Consignee" | — | 1140.00 | — | — | |
| — | — | — | 2,36,000 | ||
| Supply of earth electrode mild steel galvanized, light class, IS:1239(PART-I)- 1979.earth electrode pipe should be with 3 mm thick, 50 mm dia and perforated(staggered),5 mm dia holes, 2 nos per 305 mm length. Earth pipe should include CI threaded cap. Materials to be procured and designed as per Drg No. SI/TYP/0097 dated 25.03.25 Inspection: - RITES | — | 200.00 | — | — | |
| — | — | — | 4,248 | ||
| Supply of 'ELBOW'- BENDS to suit GI pipes 50 mm dia (3.6 mm thickness) Inspection: Consignee | — | 40.00 | — | — | |
| — | — | — | 12,27,200 | ||
| "Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. Inspection: RITES" | — | 260.00 | — | — | |
| — | — | — | 17,38,370.2 | ||
| Supply of Fencing frame for ring earth area, location box and other S&T premises. (Height of fence would be of 1.5m) | — | 580.00 | — | — | |
| — | — | — | 5,38,080 | ||
| "Supply of ISI marked XLPE insulated PVC outer sheathed, FR-LSH, armoured with aluminium conductor cable1100V grade of size 2 core 70sq.mm as per IS no.7098 (part-1) 1988 or with latest amendment. Inspection: RDSO/RITES" | — | 1140.00 | — | — | |
| — | — | — | 1,41,600 | ||
| "Supply and Execution of Exothemic Welds. This includes Welding Kit , Welding Powder, Mould and other necessary materials. Note- No. in unit column indicates per welding. Inspection: Consignee" | — | 1200.00 | — | — | |
| — | — | — | 35,400 | ||
| "Installation of MEEB/SEEB/BRC with the insulators (As per the instruction of Site Engineer). Fitting materials & Insulator (Dough Moulding Compound Conical type of different Size) as per the site requirement to be supplied by the contractor. Note: 'No' in the unit column indicates 'per insulator' " | — | 1200.00 | — | — | |
| — | — | — | 9,20,400 | ||
| "Installation of Unit Maintenance Free Earth . It includes ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper Strip to the earth electrodes. (v) This also includes supply of CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3-inch thickness. All material tools and features required for weld will be arranged by contractor. Inspection: Consignee. " | — | 260.00 | — | — | |
| — | — | — | 2,83,200 | ||
| "Segregation of Clean & Dirty wire ( Earth wire, wire from unprotected sources,etc.) in Relay Room and IPS Room. This includes supply of PVC pipe & PVC Trough of different sizes & fixing of it along with laying of dirty cable through PVC pipe/Trough. It also includes proper writing of "" DIRTY CABLE"" & "" CLEAN CABLE"" on the cable tray or PVC Pipe. Note- Job. in unit column indicates per Relay Room & IPS Room." | — | 20.00 | — | — | |
| — | — | — | 70,800 | ||
| "Segregation of Clean & Dirty wire ( Earth wire, wire from unprotected sources,etc.) in SM Room. This includes supply of PVC pipe & PVC Trough of different sizes & fixing of it along with laying of dirty cable through PVC pipe/Trough. It also includes proper writing of "" DIRTY CABLE"" & "" CLEAN CABLE"" on the cable tray or PVC Pipe. Note- Job. in unit column indicates per SM Room." | — | 20.00 | — | — | |
| — | — | — | 88,500 | ||
| "Segregation of Earth wire from equipment wiring in Location Box and Bunching. PVC Channels/ troughs to be provided and fixed Note- Job. in unit column indicates per Location" | — | 300.00 | — | — | |
| — | — | — | 18,880 | ||
| "Installation of GI Tape (50 X 6 mm) for connecting Main earth pit to other earth pit in case of loop earth Note: 'No' in the unit column indicates 'per pair of earth pit'" | — | 200.00 | — | — | |
| — | — | — | 97,720 | ||
| Welding for jointing MS flat width of different lengths strips connecting from Earth to location boxes/Signal post/Signal Unit for better continuity. Prior approval of welding material to be taken from Engineer In charge. | — | 280.00 | — | — | |
| — | — | — | 33,040 | ||
| Closing of Cable Entry Holes by concreat permanently. The materials required for the work i.e cement ,Sand,1/4'Stone chips etc. will be supplied by the contractor. | — | 280.00 | — | — | |
| — | — | — | 11,800 | ||
| "Fixing of Down Conductor through HDPE Pipe for A'- Class Surge Arrestor. HDPE pipe will be supplied by Rly. Note :- No. in Unit column indicates per Arrestor." | — | 20.00 | — | — | |
| — | — | — | 47,200 | ||
| Increasing the height of 'A' Class Surge Arrestor (3 Mtrs. above of VHF Antena). Dismetalling of existing 'A' Class Surge Arrestor & refixing as per the instruction of Rly. site engineer. All the item required for cement concreating & refixing will be supplied by the contractor. | — | 20.00 | — | — | |
| — | — | — | 2,73,760 | ||
| "FIXING OF FENCE AROUND THE RING EARTH AREA AND OTHER MISCLLANIOUS WORKS TO BE EXECUTED. THIS JOB INCLUDES CUTTING AND WELDING OF MS GRILL , DRILLING, CEMENT CONCRETING. THIS WORK TO BE EXECUTED IN ONE RING EARTH AREA AS PER THE INSTRUCTION OF RAILWAY SITE ENGINEER(S). ALL THE MATERIALS (i.e SAND, CEMENT, STONE CHIP ETC) & MANPOWER TO BE SUPPLIED & PROVIDED BY THE CONTRACTOR EXCEPT MS GRILL FENCE . As per 'Typical fencing for earthing S&T installation' Annexure-III (c) of document no. RDSO- Sig0SPD(PROJ)/1/2020 ver 0.0 dtd 01/01/25. Note: Per foundation of fence would be of 250mm X 250mm with 300mm minimum depth. " | — | 580.00 | — | — | |
| — | — | — | 18,61,900 | ||
| "Provision of Concreate Path Way (500 mm Width) from One Earth pit to the consequtive Earth Pit. & Painting of Earth Pit As well as concreate path way. This includes supply of Bricks, Cement. Sand, Stone chip & Paint of good quality. " | — | 860.00 | — | — | |
| — | — | — | 1,15,640 | ||
| "Installation of GI Wire in location Box and soldering / Trinkering of cable armour. This includes Releasing of existing armour connection from existing GI wire and replacement with new GI wire and resoldering of armour with New GI wire. Note: 6 SWG (4mm dia) GI wire and soldering material to be supplied by the contractor." | — | 400.00 | — | — | |
| — | — | — | 23,58,440 | ||
| Earthing of relay rack and power equipment etc. to be done along with the supply of all requisite materials, Earthing shall be in the form of Ring Earth conforming to RDSO spec RDSO/SPN/197 Ver.1.0 or Latest (with a minimum 10 maintenance free earth electrodes) and as per CSTE/ER/Kolkata's technical circular No.92, using copper rings with earth resistance less than 1 ohm. The earthing shall be maintenance free. The ring earth shall be connected to copper flat of size 25x3 mm in the relay room and IPS room. The copper flat fixed on the wall to the entire breadth of Relay room and IPS room as an earth bus bar and all earth connections shall be taken from it. A, B ,C & D class protection shall be provided for all EI equipmentlnepection: Consignee | — | 10.00 | — | — | |
| — | — | — | 42,88,800 | ||
| Supply of unchanged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Specn.No. IRS:5-88/2004 or latest with inter cell connectors, nuts and bolts etc. Inspection: RDSO A)2V, 80 AH | — | 1200.00 | — | — | |
| — | — | — | 12,91,200 | ||
| Supply of unchanged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Specn.No. IRS:5-88/2004 or latest with inter cell connectors, nuts and bolts etc. Inspection: RDSO B)2 V, 120 AH | — | 300.00 | — | — | |
| — | — | — | 7,320 | ||
| "Supply of V.F. transformer 1220:600/470 /:1220 as per IRS:TC-22/ 76 or latest. Inspection - consignee " | — | 10.00 | — | — | |
| — | — | — | 4,300 | ||
| "Installation of V.F. transformer 1220:600/470 /:1220 as per IRS:TC-22/ 76 or latest. Inspection:- consignee " | — | 10.00 | — | — | |
| — | — | — | 79,508.4 | ||
| Supply of (60 KG) SK 140-011 PLATE +BBIK M12-22 GS02 -FOR RSR 180-GS05 SENSOR. Firm's Offer:Make/ Brand: Frauscher | — | 5.00 | — | — | |
| — | — | — | 6,85,981.2 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Wheel sensor ZK24-2 with 10 mtr cable & cable protection tube, Part No. AP215595 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO."Inspection: RDSO | — | 5.00 | — | — | |
| — | — | — | 2,61,600.1 | ||
| "supply of PSU Card for Universal Fail Safe Block Interface (UFSBI) equipment as per RDSO Specn No.IRS S104/2012 of Webfil make Make/brand= WEBFIL LTD,KOLKATA" | — | 5.00 | — | — | |
| — | — | — | 2,03,609 | ||
| "Supply of COMMUNICATION DRIVER CARD FOR UNIVERSAL FAIL SAFE BLOCK INTERFACE (UFSBI) EQUIPMENT AS PER RDSO SPECN NO. IRS S-104/2012 OF WEBFIL MAKE Make/brand= WEBFIL LTD,KOLKATA" | — | 5.00 | — | — | |
| — | — | — | 1,73,873 | ||
| Supply of SYSTEM CARD FOR UNIVERSAL FAILSAFE BLOCK INTERFACE (UFSBI) EQUIPMENT AS PER RDSO SPECN NO.IRS S- 104/2012 OF WEBFIL-MAKE Make/brand= WEBFIL LTD,KOLKATA | — | 5.00 | — | — | |
| — | — | — | 1,71,389.1 | ||
| "Supply of Output card for Universal Fail Safe Block Interface (UFSBI) equipment as per RDSO Specn. No. IRS:S-104/2012, Make-WEBFIL. Make/brand= WEBFIL LTD,KOLKATA" | — | 5.00 | — | — | |
| — | — | — | 91,184.5 | ||
| "Supply of Feedback card for Universal Fail Safe Block Interface (UFSBI) equipment as per RDSO Specn. No. IRS:S-104/2012, Make-WEBFIL. Make/brand= WEBFIL LTD,KOLKATA" | — | 5.00 | — | — | |
| — | — | — | 91,184.5 | ||
| "Supply of INPUT CARD FOR UNIVERSAL FAIL SAFE BLOCK INTERFACE (UFSBI)EQUIPMENT AS PER RDSO SPECN NO. IRS S- 104/2012 OF WEB FIL - MAKE Make/brand= WEBFIL LTD,KOLKATA" | — | 5.00 | — | — | |
| — | — | — | 5,16,962.5 | ||
| SUPPLY OF DIFFERENT CARDS OF CEL MAKE SSDAC SUPPLY OF RESET BOX FOR CEL MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version CEL Make : INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | 3,82,320 | ||
| Reset Box & All cards inside the Re- SET Box for HASSDAC (Make CEL),as per RDSO Specification No. RDSO/SPN/177/2012 (ver.3) or latest. | — | 20.00 | — | — | |
| — | — | — | 9,26,967.3 | ||
| Supply of Dual MLB Card no 4 suitable for CEL make HASSDAC as per ROSO Spn RDSO/SPN/177/2012 ver 3.0 or latest. MAKE-CEL. Inspection: RDSO | — | 10.00 | — | — | |
| — | — | — | 4,01,082 | ||
| "Spare Cards of Signal Conditioner Card No.1 (SCC1) for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with version 3 or latest, Make: CEL ACCEPTED: MAKE - CEL Signal Conditioner Card No.1 (SCC1) for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with version 3 or latest" | — | 10.00 | — | — | |
| — | — | — | 3,14,734.4 | ||
| SUPPLY OF DIFFERENT CARDS OF CEL MAKE SSDAC SUPPLY OF EVENT LOGGER CARD FOR CEL MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version CEL Make : INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | 3,50,913.7 | ||
| Supply of Modem Card of CEL make HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 version 3 or latest, Make- CEL. Inspection: RDSO | — | 10.00 | — | — | |
| — | — | — | 3,85,675.3 | ||
| SUPPLY OF DIFFERENT CARDS OF CEL MAKE SSDAC SUPPLY OF RELAY DRIVER CARD FOR CEL MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version CEL Make : INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | 1,16,361.2 | ||
| SUPPLY OF DIFFERENT CARDS OF CEL MAKE SSDAC Supply of DC-DC Converter for SSDAC systems (SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version OF cel Make Make : INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | 4,33,600.6 | ||
| SUPPLY OF DIFFERENT CARDS OF CEL MAKE SSDAC SUPPLY OF SIGNAL CONDITIONER CARD FOR CEL MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version CEL Make : INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | 3,13,190.64 | ||
| SUPPLY OF WEB DETECTOR (EACH SET CONSIST OF 2 NOS OF TX COILS & 2 NOS RX COILS) FOR CEL MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version CEL Make. Length of cable: 5/10/15 m as per site requirement. : INSPECTION : RDSO | — | 6.00 | — | — | |
| — | — | — | 3,13,190.64 | ||
| SUPPLY OF WEB DETECTOR (EACH SET CONSIST OF 2 NOS OF TX COILS & 2 NOS RX COILS) FOR GGT MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version GGT Make.Length of cable: 5/10/15 m as per site requirement. : INSPECTION : RDSO | — | 6.00 | — | — | |
| — | — | — | 1,14,113.6 | ||
| Replacement of Boom ELB of L. C. Gate . ( All fixing Materials as Nuts & Bolts, Clamps of different sizes etc. are to be supplied by the Contractor. These also includes cost of Transpotation of Materials from store to site and release materials from site to store). Each set comprising of Boom A+B+C+D booms in both side). Boom will be supplied by Railway. | — | 20.00 | — | — | |
| — | — | — | 1,25,003.55 | ||
| SUPPLY & INSTALLATION OF ELEC. LIFTING BARRIER GATE SPARE PARTS AS PER RDSO SPECIFICATION RDSO/SPN/208/2012 VER. 2.0 OR LATEST. AND MATERIALS SHOULD PROCURED ON RDSO APPROVED FIRM OF M/s URBAN MAKE OR SIMILAR. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. . ELB BOOM 'A' SECTION | — | 15.00 | — | — | |
| — | — | — | 2,25,581.7 | ||
| SUPPLY & INSTALLATION OF ELEC. LIFTING BARRIER GATE SPARE PARTS AS PER RDSO SPECIFICATION RDSO/SPN/208/2012 VER. 2.0 OR LATEST. AND MATERIALS SHOULD PROCURED ON RDSO APPROVED FIRM OF M/s URBAN MAKE OR SIMILAR. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. ELB BOOM 'B' SECTION | — | 30.00 | — | — | |
| — | — | — | 2,32,519.5 | ||
| SUPPLY & INSTALLATION OF ELEC. LIFTING BARRIER GATE SPARE PARTS AS PER RDSO SPECIFICATION RDSO/SPN/208/2012 VER. 2.0 OR LATEST. AND MATERIALS SHOULD PROCURED ON RDSO APPROVED FIRM OF M/s URBAN MAKE OR SIMILAR. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. ELB BOOM 'C' SECTION | — | 30.00 | — | — | |
| — | — | — | 84,014.55 | ||
| SUPPLY & INSTALLATION OF ELEC. LIFTING BARRIER GATE SPARE PARTS AS PER RDSO SPECIFICATION RDSO/SPN/208/2012 VER. 2.0 OR LATEST. AND MATERIALS SHOULD PROCURED ON RDSO APPROVED FIRM OF M/s URBAN MAKE OR SIMILAR. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. ELB BOOM 'D' SECTION | — | 15.00 | — | — | |
| — | — | — | 16,53,750 | ||
| Gear box assembly with clutch Assembly for ELB confirming to RDSO spec. No> RDSO/SPN/208/2012 Ver. 2.0 Maker's | — | 50.00 | — | — | |
| — | — | — | 41,080 | ||
| Supply of Power contractor/ Relay for motor 24V DC, MAKE L&T MLO/SIEMENS. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | 2,66,440 | ||
| Supply of PMDC MOTOR 24V DC, 90W/1500RPM.The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | 49,440 | ||
| Supply of boom lock PMDC motor 24V DC/40W/1500RPM.The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | 20,000 | ||
| Supply of TIMING BELT. The material will be as per RDSO RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | Specn. | ||
| — | — | — | 1,23,260 | ||
| "Supply of FRICTION CLUTCH SUB ASSEMBLY. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee." | — | 20.00 | — | — | |
| — | — | — | 26,040 | ||
| Supply of Limit Switch Set for boom lock proving. The material will be as per RDSO Specn. No.RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | 1,17,416 | ||
| SUPPLY & INSTALLATION OF ELEC. LIFTING BARRIER GATE SPARE PARTS AS PER RDSO SPECIFICATION RDSO/SPN/208/2012 VER. 2.0 OR LATEST. AND MATERIALS SHOULD PROCURED ON RDSO APPROVED FIRM OF M/s URBAN MAKE OR SIMILAR. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. ROTARY SWITCH OF GATE PANEL | — | 100.00 | — | — | |
| — | — | — | 3,94,290 | ||
| Supply of Self Regulating Type Battery Charger,230V AC/24V DC,30 Amps as per RDSO Specn. No.IRS:S- 86/2000 (Amnd.4) or latest. Inspection: RDSO | — | 10.00 | — | — | |
| — | — | — | 4,23,940 | ||
| "Supply of pure sine wave 500 VA online inverter input voltage: 24V DC, output voltage: 110V AC as per RDSO SPEC NO. IRS: 5-82/92 (AMD.2) OR LATEST. Note- Installation should be through OEM's representative. Inspection: RDSO." | — | 10.00 | — | — | |
| — | — | — | 47,565 | ||
| Insulation Sets for Ground Connection, Made of Nylon-66 for 220mm throw Thickweb Switch Point Machine (TWS), as per Specification No. IRS.S.40/84 or latest. One Set consisting material of :- (1) Insulating Washer Drg. No.-S-8640 = 12 Nos. (2) Insulating Washer Drg. No.- S- 8640/1=04 Nos. (3) Insulating Washer Drg. No.-S-8640/2=02 Nos. (4) Insulating Bush Drg. No.-S- 23199=10 Nos. (5) Insulating Bush Drg. No.-S-3463=01 No. (6) Insulating Bush Drg. No.-S-22179=02 Nos. (7) Insulating Bush Drg. No.-S-8912=02 Nos. (8) Insulating Plate Drg. No.-S-3404=02 Nos. (9) Insulating Bush Drg. No.-S-8813=04 Nos. | — | 100.00 | — | — | |
| — | — | — | 7,788 | ||
| Hydrometer complete 260 x 180 mm. long for lead acid cell graduated from 1.000 to 1.3000 at intervals at 0.005 along with nozzle and tube with IR marking as per IS: 9621(latest). | — | 100.00 | — | — | |
| — | — | — | 14,95,500 | ||
| SUPPLY OF SPARE TRACK SIDE ELECTRONIC UNIT (EAK-AzLM) SUITABLE FOR MSDAC SYSTEM OF ELDYNE MAKE. Make / Brand: Eldyne Electro Systems Pvt Ltd. Inspection: RDSO | — | 5.00 | — | — | |
| — | — | — | 5,77,752.7 | ||
| Supply of ELDYNE Make Serial I/O card for Eldyne Make Multi Section Digital Axle Counter MSDAC as per RDSO/SPN/176/2013 Ver.3 make Thales C/o Eldyne. Make Eldyne Electro System Pvt. Ltd. THALES make via ELDYNE. Inspection: RDSO | — | 5.00 | — | — | |
| — | — | — | 1,47,063.4 | ||
| Supply of ELDYNE Make PDCU as spares of Multi section digital axle counter (MSDAC) as per RDSO /SPN/176/2005 Make-Thales/ Eldyne Electro System Pvt. Ltd. Inspection: RDSO | — | 5.00 | — | — | |
| — | — | — | 11,50,500 | ||
| Supply of ELDYNE Make PSU Card For Eldyne MSDAC (Part No- 3CR31040AAAA) Make-Eldyne/Thales.Compatible to work with Eldyne make MSDAC as per RDSO/SPN/176/2013 Ver.-3 or latest. Firm'S offer: THALES make via ELDYNE. Inspection: RDSO | — | 5.00 | — | — | |
| — | — | — | 26,19,033.6 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Micro Processor unit, Part No. AP215623 as per RDSO specification No. DSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO."Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 5,21,654.4 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Input Amplifier Module (UP), Part No. AP215629 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO"Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 6,27,344.64 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Relay Output Module (RE), Part No. AP215613 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO"Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 3,18,656.64 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Power Supply Protection Module (ZANAP), Part No. AP215625 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO"Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 8,40,424.32 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Power Supply Module (DC12), Part No. AP215624 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO."Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 2,70,625.92 | ||
| "Various cards of MSDAC of (Sigma Model BO23)Lightning Protection Board (ZAG2Z), Part No. AP215633 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO."Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 10,97,569.92 | ||
| Various cards of MSDAC of (Sigma Model BO23)Wheel sensor ZK24-2 with 10 mtr cable & cable protection tube, Part No. AP215595 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO.Inspection: RDSO | — | 8.00 | — | — | |
| — | — | — | 8,828 | ||
| SUPPLY AND INSTALLATION OF LED OF BIG SIZE FOR GATE PANEL OF R,Y,G. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. | — | 200.00 | — | — | |
| — | — | — | 15,77,174.1 | ||
| "Supply of TWS Components for Clamp Type Ground Connection for Point Machine 220mm Stroke. Consists of :- 1.Clamp Point Lock 60kg (TWS) for B.G to Drg.No. RDSO/S3395A- Alt-1 : 1 Set. 2.Drive rod to Drg.No. RDSO.S.3460 Alt- PTJ-1 : 1 No 3.Drive rod lug to Drg.No RDSO.S.3461 Alt- PTJ-4 : 1 No 4.Drop lug to Drg.No RDSO.S.3598 Alt-1 :4 Nos 5.Switch Extension Bracket to Drg.No RDSO.S.3591, Alt-PTJ-1 : 2Nos 6.Bush to Drg.No RDSO.S.3463 : 1 No 7.Insulating Plate (RH) to Drg.No RDSO.S.3592 : 1 No 8.Insulating Plate (LH) to Drg.No RDSO.S.3593 : 1 No 9.Insulating Bush for Detector rod drop lug to Drg.No CWM 02120 : 2 Nos 10.Insulating Bush for Lock rod drop lug to Drg.No CWM 02220 :2 Nos 11. Insulating Washer to Drg.No S.8640 :8 Nos 12.Pin complete to Drg No. CWM 02320 :1 No " | — | 30.00 | — | — | |
| — | — | — | 4,54,131 | ||
| DISMANTLING OF EXISTING POINT FITTINGS, AND DRILLING OF HOLES IN STOCK RAIL/TONGUE RAIL/GAUGE TIE PLATE, REARRANGEMENT AND REFIXING OF EXISTING ELECTRICAL POINT DETECTOR IF AVAILABLE AND INSTALLATION OF ELECTRICAL POINT MACHINES ON MS PLATE FIXED ON WOODEN/ CONCRETE SLEEPERS COMPLETE WITH FIXING OF GROUND CONNECTIONS INCLUDING SMITHY JOB FOR WELDIND, INSULATION OF MS PLATE ON WHICH THE POINT MACHINE IS TO BE FIXED OVER THE GAUGE TIE PLATE INVOLVING RIVETTING/WELDING/OF ANGLE CLEATS. TERMINATION AND WIRING OF POINT MACHINE AND ELECTRICAL DETECTOR , PRILIMINARY ADJUSTMENT FOR OPERATION OF POINTS BY CRANK HANDLE, PAINTING AND LETTERING AS REQUIRED INCLUDING WIRING, TESTING, AND COMMISSIONING AS PER TECHNICAL SPECIFICATION. NOTE: THIS INCLUDES WORKS FOR TRIAL LAY OUT LAID BY ENGG. DEPARTMENT. ALL MATERIALS REQUIRED FOR FIXING ARE TO BE SUPPLIED BY THE CONTRACTOR EXCEPT DETECTOR & POINT MACHINE. FOR TURN OUT OF TWS. | — | 30.00 | — | — | |
| — | — | — | 17,92,735 | ||
| Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible wire and termination of 60/40 core cable/flexible wire on tag block/base plate & base plates & soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel throughing work. The work shall be done as per approved plan, extant practice on ER & the instruction of Rly. Engineer at site. Inspection authority:- Consignee | — | 4585.00 | — | — | |
| — | — | — | 5,56,000 | ||
| Digging of trench 1.2 Mtrs. deep from rail flange/ road level and 0.3 Mtrs to O.6 Mtrs wide and back filling after placing of DWC / RCC/GI pipe. (Placing of DWC/ RCC/GI pipe covered separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. F o r track crossing, RDSO sketch No. SDO/CABLE LAYING/ 009 or latest and for Road Crossing, RDSO sketch No. SDO/CABLE LAYING/010 or latest are to be followed. | — | 2000.00 | — | — | |
| — | — | — | 9,80,000 | ||
| Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom without brick alongside the track in all kinds of soil, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc. The work shall be done as per the extant practice on Eastern Railway and instructions of Railway Engineer at site. Note:-(a) for all trenches from distant signal to home signal and to relay room, the minimum headway above the uppermost cable in the trench should be 600mm. If due to a large no. Of cables headway is not available, 4" of 1:2:4 concreting should be done. Note:-(b-1) payment wifi be made as per actual work done on pro-rata basis, if required depth is not available at site. (b-2) if the depth of trench is not uniform in a span of 100 mtr. Or shorter lengths if site condition demands along the cable run, minimum depth will be taken for that particular stretch for payment. | — | 4000.00 | — | — | |
| — | — | — | 1,53,184 | ||
| Supply of SITEL PRIMARY Cell(Dry, Leclanche) - 1.5 V shallnot be less than 45 AH as per Specification IRS:S- 95/96 Amd | — | 200.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CheckListAnnexItoVIIIUPDATED.pdf Annexure I to VIII
ATTACHMENT
Annexure-IX.pdf
ATTACHMENT
Annexure-X.pdf
ATTACHMENT
Annexure-XI.pdf
ATTACHMENT
AnnexureV.pdf
ATTACHMENT
Annexure_VA.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
GCCwithCorrectionSlips1to10.pdf
ATTACHMENT
LabourCess.pdf
ATTACHMENT
VICINITYOFUNDERGROUNDCABLE- Pentalty for damages of cables
ATTACHMENT
TermsofPayment.July-25.pdf
ATTACHMENT
TENDER DOCUMENTS
ATTACHMENT
NewEarthElectrodeDrawing1.pdf
ATTACHMENT
EarthElectrodeC-36.pdf
ATTACHMENT
CheckListAnnexItoVIIIUPDATED.pdf
ATTACHMENT
JPO-CABLEDIGGINGWORK-VICINITYOFUNDERGROUNDCABLE-SRDSTESRDEN-C-240124.pdf
ATTACHMENT
Updatedtenderdocument-RELAYLED.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .