REPAIRS TO FLOORS, WALL JOINERY, ROOF SHEET, CEILING, PLUMBING ITEMS AND CERTAIN MISC B/R WORKS AT SECT A AND OTM ACCN OF ZONE-III AREA UNDER AGE B/R-II UNDER GE DINJAN

Amount

Taking down steel windows/ventilators frame with shutters, n.exceeding 1.5 Sqm in each (without taking off shutter from the frame) complete all as specified and as directed.

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting with one shop coat of zinc chrome primer complete all as specified and as directed.

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including painting with one shop coat of zinc chrome primer complete all as specified and as directed.

S&F for aluminium anodised glazed ventilators with frame of suitable aluminium section and aluminium anodised (Deco) pattern grill 75X75mm mesh size, design No 102, 7.3mm thick including suitable F/H section frame, fixed with plate screws, providing 3mm thick ordinary plain glass pane fixed to frame, rubber beading, handles and aluminium tower bolts etc including taking down old unserviceable windows complete all as specified and as directed.

M&L for anodised aluminium section, medium anodic coating of grade AC 15 for frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

M&L for anodised aluminium window and ventilator shutters, fixed type, with or without sash bar, using aluminium section weighing not less than 0.55Kg per metre including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium handles 2 numbers in each shutter, hinges, anodised aluminium snap beading, screws etc complete all as specified and as directed.

M&L for Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with MS fillets and stainless steel wire staples, complete all as specified and as directed

M&L for mild steel work for door frame/chowkats using any section of angle, cut to length required, welding, grinding etc.including fixing butt hinges, hook or slot for tower bolts and sliding door bolt etc by welding. Angle iron shall conforming to Fe-290, Gde E-165 complete all as specified and as directed.

M&L for framed mild steel work for door or gate of angle iron or other section with gusset plate, rail, braces, etc complete drilling for fixing of steel sheeting or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing. Mild steel shall conforming to Fe-410-0 Gde E-250 complete all as specified and as directed. Note : Steel sheeting or other covering, running rail/ guides shall be measured and paid separately.

S&F for 1.00mm thick plain mild steel black sheet in covering to door, water tank, water trough, hole punched, including round headed screws, clout nails and fixed to wooden or steel frame/members, etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends all as directed.

S&F for 40 mm thick flush door shutter, solid core construction, with particle board core and plywood face panels, commercial type on both sides with internal jointless lipping not less than 25 mm depth complete, as specified and as directed.

Taking down chowkats or frame, n.exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frames, exceeding 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed.

S&F for pressed steel frames for doors local work shop made of size 125x60mm with one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate, shock absorber etc and including PCC filling of hollow section using Plain cement concrete 1:3:6 type C1 complete all as specified and as directed.

S&F for well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of 12mm thick veneered particle board medium density with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed, Sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a).

M&L for 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded complete all as specified and as directed in SSR Part I Section 8 clause 8.24 (a).

S&F for 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded complete all as specified and as directed in SSR Part I Section 8 clause 8.24 (b).

M&L for refixing of old servicieable shutters of any description in existing location/opening not exceeding 1 sqm each including resecuring or easing & adjusting complete all as directed.

M&L for refixing of old servicieable shutters of any description in existing location/opening exc 1 sqm but n exc 2 sqm each including resecuring or easing & adjusting complete all as directed.

S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S&F for 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 100 mm size, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and as directed.

S&F for 200 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F for 150 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F for 100 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F for 150 mm size,aluminium handles, cast type, anodised to a bright natural, mat finish not be less than grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F for 100 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish not be less than grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F for 125 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F for aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F for 100mm mild steel hasp and staple, safty type, brass with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as directed.

S&F in repair mild steel 300mm, ordinary arrow pattern springs for doors including roller and roller plate complete all as directed.

S&F for mild steel 300mm, ordinary arrow pattern springs for door including roller and roller plate complete all as specified and as directed

S&F in repairs curtain/harrison rails, 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers, etc complete all as specified and as directed.

S&F in repairs curtain/harrison rails, 20mm dia, aluminium alloy/anodised with fixing brackets, stops, rollers, etc complete all as specified and as directed.

M&L for plain cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and as directed.

S&F for mild steel small articles using flat iron of size 25x3mm thick such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290, Gde E-165 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling timber works in fillets,rail, post, rafter, purlins etc under 40 Sq.cm in section (unframed work), in any position complete all as specified and as directed.

M&L for second class hard wood plain fillets, square or rectangular in section, exceeding 3 & not exceeding 6sqcm in cross sectional area, bullnosed, splayed, chamfered or rounded on one edge or face fixed with screws complete all as specified and as directed.

Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and as directed.

M&L for second class hardwood, scantlings, clean sawn, in unframed work complete all as specified and as directed.

Dismantling timber boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F for 18/19mm thick prelaminated particle board, interior grade, one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame works as complete.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortor (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for cutting down and uprooting plant/shrubs of girth not exceeding 15cm from roof tops/sides of external walls of building, chajjas, wall junction etc including taking out penetrated roots in to walls, slabs surfaces and treating by applying suitable chemical solution (herbal medicine) as per manufacturer's instructions in and around the surfaces of uprooted plant/shrubs and making good the location with PCC 1:2:4, type B0, on plastering using cement mortar 1:3 , finished smooth all as directed. Note : - Work shall be carried out upto a height of 10 metre from GL. Cost elements for stagging/scuffolding shall deemed to be included in quoted rate.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises complete all as specified and as directed.

M&L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor (1:4) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for non-skid, ceramic, coloured tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm butnot exceeding 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor (1:4) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for non-skid, ceramic, coloured tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceding 0.11 sqm but not exceeding 0.18 sqm,provided on vertical surfaces of walls such as skirting, dados etc, including 10 mm thick bedding in cement mortor (1:3) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for glazed, ceramic, coloured tiles of size 450mmx350mmx7-8mm thick, on vertical surfaces, including 10 mm thick backing of cement mortor (1:4) and set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for Chequered cement concrete tiles of size 25cm x 25cm x 20mm thick, as in floors etc, including 15 mm thick screed bed in cement mortar 1:6 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and as directed.

S&F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of white wash complete all as specified and as directed. Make of E-Board :- Eternit Everest / lafarge/ Armstrong/Visaka Industries Ltd or equivalent.

Dismantling of asbestos cement (corrugated, semi corrugated) sheets in roof coverings including ridges complete all as specified and as directed.

S&F for 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with 'L' type or 'J'-type or cranked hook bolts, complete all as specified and as directed.

S&F for 6 mm thick Asbestos Cement two piece adjustable serrated ridge for corrugated or semi corrugated AC sheet, fixed with 'L' type or 'J' type hook or cranked hook bolt with washer complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. (Colour of ridge shall be same colour as that of sheet used for roof)

Dismantling of rotational moulded polyethylene water tank of capacity exceeding 250 litres but not exceeding 500 Ltrs complete all as specified and as directed.

S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

Dismantling of rotational moulded polyethylene water tank of capacity exceeding 500 litres but not exceeding 1000 Litres complete all as specified and as directed.

S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

S&F for in repair 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed.

Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete retrieved from relevent item No. 84 here-in-before respectively as directed

Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed.

Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete retrieved from relevent item No. 87 here-in-before respectively as directed

S&F in repairs 15 mm bore, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15 mm bore, bib taps, PTMT, any colour, high pressure screwed for iron pipes and fixed complete all as specified and as directed.(min weight 90 gms)

S&F in repairs sink made out of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mmX330mmX160mm complete all as specified and as directed. Make : PRAYAG/Anjali/Blue Star.

S&F in repair swival shower of PTMT 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and as directed.

S&F for 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints fixed to wall using MS holder bat for rain water, etc complete all as specified and as directed.

S&F in repair 75 mm dia outlet and minimum 50mm water seal, PVC (SWR) floor trap, with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in reapir 10 litre capacity, PVC valve less syphonic duel type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and as directed.

S&F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and as directed.

M&L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors laid in panels, finishing the surfaces even & smooth with using extra cement complete all as specified and as directed.

S&F for 3 mm thick, 38mm wide glass dividing strips and inserted in position to conform to design complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment with 75mm thick sand layer complete all as specified and as directed.

M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100m & n.exc.250m. (b) 15 mm thick plastering in cement mortar 1:4 finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm

M/S Karen Enterprises

Construction House

M/S Ranjan Gohain

M H KHAN

M/S BORAH BROTHERS

M/S A K BROTHERS

M/S CHANDAN ENTERPRISE

FREEZCON