Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.3 L+₹1.3 L (2.78%)Rejected-Finance CHOWDHARY APARTMENT BLOCK II FLAT NO 7 3RD FLOOR PUNJABIPARA SEVOKE ROAD SILIGURI DIST DARJEELING 734001 | JALPAIGURI | WEST BENGAL | 734001 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹46.6 L+₹1.5 L (3.39%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹47.0 L+₹1.9 L (4.19%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹47.3 L+₹2.2 L (4.96%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE SEVOKE ROAD POST SALUGARA DISTT JALPAIGURI WEST BENGAL
PROVN OF CERTAIN REVENUE WORKS AT SEVOKE MIL STN UNDER GE SEVOKE ROAD
2022_MES_534094_1
GE/SEV/12 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹86,000
Yes
27 Aug 2022
28 Jun 2022
8 Aug 2022
28 Jun 2022
6 Aug 2022
30 Jul 2022
29 Jun 2022 - 8 Jul 2022
60 days
Amount
Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Demolition of brickwork built in cement mortar including taking out roots vegetation if any at any position and removal to out side MD land, complete all as specified and directed.
Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, straicases, landings, chajjas and similar suspended work complete all as specified and directed.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type for foundation etc for shaft,wells, cesspits, manholes, pier hoes, etc n. exe 10 sqm on plan and n.exc 1.5 mtr in depth complete all as specified and directed.
M&L cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregated) as in foundation, filling and mass concrete complete all as specified.
M&L for brick work with fly ash brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
Taking down chowkats or frames, n.exc 1.5 sqm with shutters (Without taking off shutters from the frame)complete all as specified and directed.
Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with shutters (Without taking off shutters from the frame) and refixing of old shutter in new chowkats complete all as specified and directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L 100mm thick cement concrete 1:2:4 (type B-2) (using 40mm graded crushed stone aggregate) as in PCC floor complete all as specified and directed.
M&L for vitrified (light shade) coloured ceramic tiles 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 20mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for virified (light shade) coloured ceramic tiles 10mm thick (square/ rectangular) (light shade) area of each tile not exceeding 0.36 Sqm in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar screed bed in CM 1:4 etc, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) area exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured 450x300x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:3 etc, complete all as specified and directed.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) nominal mix as in fins, facias,chajja,lintel etc complete all as specified and as directed.
M& L for Mild steel TMT bars 08 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No 19 above but 5mm dia and over upto including 10mm dia in stirrups, spacers and binders completed all as specified and as directed.
Use and waste formwork to side concrete foundations, footing bases of column, raft and ,raft beams, side and soffits (if any) of foundation and plinth beams and similar work vertical or to batter , rough finished surfaces complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces of walls including finishing the surfaces even and smooth (without using extra cement) etc, complete all as specified and directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm thick and 10 mm thick each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 125mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed
M&L for cement concrete of 1:3:6 Type C-1 using 20 mm graded crushed stone aggregate as in filling of pressed steel frame, (lintel copings, hold fast block etc) complete all as specified and directed.
S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering on both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood (Hollock/Sal/Kalasiris), Kiln seasoned and chemically pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges, of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc, sizes of members of shutters as specfied in SSR Part I, Section 8, cluase 8.24 (a) ; supplied and fitted to chowkats complete all as specfied and directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised bow handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised bow handles of 125mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 125mm long, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M & L for preparation of new/old internal surfaces of wall and providing 1mm thick wall care putty ,complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed. .
M&L for preparation of new decorated surfaces of wall and applying two coats of antifungal exterior paint (of shade/colour as directed by GE ) over one coat of primer all as per manufacture instruction including necessary scaffoldings etc complete as specified and directed.
S&F CP curtain rails 20 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed.
S&F rimless single piece EWC white with UF soft close slim seat cover, hinges, fixing accessories, accessories set and cistern fittings 'S' trap (300mm) size 380x725x690mm complete all as specified and as directed. Cat part NoONS-WHT-108535300UFSM of Jaquar or equivelent from list of make
S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore etc complete all as specified and directed. Cat part No ONS-WHT-10901 of Jaquar or equivelent from list of make.
S&F Brass chromium plated towel rail, , 60cm long including fittings complete all as specified and as directed. Cat part No CAN-11155 of Jaquar or equivelent from list of make.
S&F CP brass overhead shower 300mm dia round shape single flow (body & face plate stainless steel with chrome finish) with rubit cleaning system complete all as specified and as directed. Cat part No OHS-CHR-1633 of Jaquar or equivelent from list of make.
S&F shower arm casted 190mm long light round shape for wall mounted shower with flange of complete all as specified and as directed. (Make-jaquar model No SHA-477 or equivelent from list of make.
S&F bibtap 15mm bore, CP fancy type complete all as specified and as directed.
S&F 15 mm bore wash hand basin mixture cast copper alloy chromium plated fancy type complete all as specified and directed.
S&F Stop valve/angle cock, 15mm bore (male or female thread) cast copper alloy, with crutch or butterfly handle, fancy type,screwed down screweed for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore CP fancy type Health faucet with 1.5 meter long tube with CP wall bracket complete all as specified and as directed.
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceal water tubing etc and making good complete all as specified.
S&F PVC (SWR) floor trap dia of outlet 100mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified.
S&F in repairs 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F in repairs 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F in repair of CP brass wall mixture 3 in 1 system with provision for shower with long bend pipes and wall flangs chromium plated swivel joint and matching CP arm complete all as specified and directed
S&F 15 mm bore chromium plated two way bib cock completeall as secified
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S&F PVC (SWR) 110mm bore junction (Single T) equal or un equal provided with access door complete as specified and directed.
S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F PVC (SWR) 75mm bore junction (Single T) equal or un equal provided with access door complete as specified and directed.
N&L for 150 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.
M&L fo Precast RCC 1:2:4 (type B-1) (using 20mm graded crushed stone aggregate) as in cover slab and set in CM 1:6 including necessary form work and moulds complete all as specified and directed.
S&F Anodised aluminum section powder coated in doors/windows/partitions etc including glazing clips, fabrication and fixing in position complete to receive sheet glass/particle board complete all as specified and directed.
S&F in repair anodised powder coated aluminium window and vntilators shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, screws handles 2 nos complete all as specified and directed. Note : Sheet glass shall be measured seperately as supply only.
Supply only 4mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
M&L for solar control film 25 micron reflective type sticked to glass panes as per instruction of manufactures complete all as specified and directed.
S&F in repair sinks without drain board, gloss finish, made of stainless steel 1 mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe also including 40mm bore PVC waste pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:6) complete all as specified and directed.
M&L for RCC M25 (Design mix) in foundations, including rafts, footings, foundation beams, plint beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete including from work complete all as specified and as directed.
M&L for RCC M25 (Design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste formwork to sides of pillars. posts. struts. piers. columns and stan- rchions for rough finished flat surfaces of concrete, square or rectangular complete all as specified and as directed.
M&L for RCC M25 (Design mix) in chajjas complete all as specified and as directed.
M&L for RCC M25 (Design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
Use and waste formwork to chullah hoods, slab , chajja, troughs and similar items including edges for rough finished flat surfaces complete all as specified and as directed.
M&L Maroom /red bajri filing in floors or pavings, laid in layers n exc. 15 cm thick spread levelled and rammed including watering complete all as specified and as directed.
M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone agg) as in sub base complete all as specified.
M&L for preparation of new plastered surface and applying two coats of weather proof exterior acrylic emulsion paint over one coat of primer over 1-2 mm thick wall care putty on wall etc complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer over and including 1-2mm thick wall care putty ,complete all as specified and directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for non skid 600x600x8 to 10 mm thick glazed ceramic tiles in floor set and jointed in neat cement slurry and pointed in white cement mixed with pignent to match with the shade of tiles complete all as specified and directed.
All as per item No 88 above but in skirting complete all as specified and directed.
S&F rolled mild steel section including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and duides for sliding doors; fixed with angle cleats or other connecting plates FE-290 Gde E-165.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as damp proof course to horizontal or vertical surfaces including necessary formwok complete all as specified and as directed
S&F flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply & Fixing stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , for steel windows and doors complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
S&F Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wire gauze etc and as in wind ties for roof complete as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exceeding 10cm in width or girth complete all as specified and directed.
S&F mild steel square bar 12mm, in grill or guard bars welded to steel window all as specified and directed.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending and binding with M.S wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
S&F for curtain rod 25mm dia stainless steel with 02 Nos bracket and 02 Nos nobs complete all as specified and as directed.
Surface excavation n.exc 30cm deep and averaging 10cm deep in soft/loose soil and getting out complete all as specified and as directed.
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description complete as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection ,foot path and hand standing finished concrete surface even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.
M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) in louvered jallies 40 mm thick (measured solid) including all mouldings but excluding frame set in CM 1: 4 complete all as specified and as directed.
M&L for 40 mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregated) as in floor complete all as specified.
M&L for chequered cement concrete tiles 20cm x 20 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for providing 75mm thick PCC (1:4:8) type D2 (using 20mm graded crushed stone aggregate) as in sub base flooring complete all as specified and directed.
M&L for coloured 450x300x7 to 8 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) area exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
Demolition cement concrete of any description and position not otherwise specifically provided for complete all as specified and directed.
S&F mild steel Framed work as in doors or gates of angle Fe 410 -W (Gde- E- 250) quality- A or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
S&F cement concrete 1:2:4, type B-2 (using 40 mm graded crushed stone aggregated) as in foundation, filling and mass concrete complete all as specified.
M&L for preparation new steel and iron surfaces of any description over in width of grith not otherwise described and applying two coat of synthetic enamel paint over priming a coat of red oxide primer complete all as specified and directed.
Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 124 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 124 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 124 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete all as specified and as directed.
S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F switch piano, surface type single pole 2 way, 5 Amp 230 Volt all as specified and as directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type 4 feet LED fitting 20 watt with Al extruded batten luminaire for 230 volt AC complete all as directed by EIC.
M&L LED street light of capacity 40 watt in Aluminium PDC housing, with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr all directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type 2 feet LED fitting 09 watt with Al extruded batten luminaire for 230 volt AC complete all as directed by EIC.
Taking down existing u/s FTL light fitting and S&F in repair wall fancy light fitting with B-22 f type holder point 230 volts necessary fixing arrangements complete all as directed.
Taking down existing u/s FTL light fitting and S&F in repair recess mounted downlighter with ABS housing & PV Opal diffuser with independent electronic LED driver, 12 W 230 Volts and necessary fixings arrangements complete all as directed
Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F energy efficient 5 star BLDC (26 W) ceiling fan 230V, 1200 mm sweep without remote with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
S&F in repair heavy duty exhuast fan AC, single phase, 230/240 V, of size 300 mm sweep steel/aluminium metal body with lowers including making holes on wall & making good the disturbed surfaces with all connecting items complete all as specified and as directed.
S&F in ventilation fan with louvers, single phase, 230/240 V, of size 200 mm sweep polycarbonate body, including making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 08 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10sq mm 2 core including making necessery connections all as specified and as directed.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above completed in level all as specified and as directed by Engr in charge. Note : Punned thickness shall be measured.
ASSOCIATED TRADING CORPORATION
LIBERAL ENGINEER CONSTRUCTION
Raj Enterprise
BIJAN KUMAR DHAR
M/S SUBRATA JOARDAR
M/S AJIT GARAGE
TAPASH SAHA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .