Renovation of various buildings of Jal Shakti Irrigation and Flood control Department Chief Engineer office complex Drawing branch and guest house at Canal road Jammu

Amount

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering.All work upto plinth level with 1:4:8 ( 1 cement : 4 Coarse sand : 8 graded stone 40 MM nominal size including carriage of materials complete.

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering.All work upto plinth level with 1:3:6 ( 1 cement : 3 Coarse sand : 6 graded stone 20 MM nominal size including carriage of materials complete.

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering.All work upto plinth level with 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone 20 MM nominal size including carriage of materials complete.

Reinforced cement concrerte work in beams suspended floors,having slope upto 15, landings balconies shelves chajjas,lintels bands plain window sills staircases and spiral cases iupto floor level including curing but excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse snad : 3 graded stone 20 MM nominal size including carriage of materials complete.

Reinforcement for RCC work including starightening cutting bending placing in position and binding all complete upto plinth level cold twisted bars/thermo mechanically treated bars.

Dumping stone excluding cost of stones in horizontal on level.

Supply of Nallah stones including carriage complete job.

Centering and shuttering including structting propping tc and removal of form work for : Foundations,footings,bases of columns etc for mass concrete.

Centering and shuttering including structting propping tc and removal of form work for : Walls ( any thickness) including attached pilasters,buttresses ,plinth and string courses etc.

Centering and shuttering including structting propping tc and removal of form work for : Suspended floors,roofs,landings balconies and access platfoform

Centering and shuttering including structting propping tc and removal of form work for : Edges of slabs and breaks in floors and walls under 20Cms wide.

Centering and shuttering including structting propping tc and removal of form work for Lintels beams plinth beams girders bressumers and centilevers

12MM cement plaster of mix 1:4 ( 1 Cement : 4 coarse sand )including carriage of material ( Complete)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50m lead as per direction of Engineers incharge.1:4: 8 or lean mix

10 CM thick average mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25MM thick mud mortaqr mixed with bhusa at 35Kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 ( 1 cement : 3 fine sand ) ,mixed with 2% of integral water proofing compound by weight of cement and finishing neat with common burnt clay ( Non modular ) brick tiles of class designation 10.0 including carriage of materials complete.

Repair to plaster of thickness 12MM to 20MM in patches of area 2.5 sq meter and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground disposal of rubbish to the dumping ground within 50M lead with cement mortar 1:4 ( 1 cement : 4 coarse sand) including carriage of materials complete.

Providing Gole 75x75MM in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone agg 10Mm and down guage ) including/finishing with cement mortar 1:3 ( 1 cement : 3 fine sand 0 as per standard design in 75x75 MM deep chase including carriage of materials complete.

Removing dry or oil bound distemper water proofing cement paintg and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Providing and applying white cement based putty of specified thickness of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete ( 1MM thick)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Distempering with Ist quality acrlylic distemper ( ready mixed) having VOC content less han 50 gms/litre,two or more coats on new work of approved manufacture of required shade and colour complete as per maufactures specifications.

Finishing walls with water proofing cement paint of required shade old work ( one or more coats applied @ 2.20 kgs/10sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work.

Providing and laying vitrifed floor tiles of size 600x600 MM with water absorption less than 0.08% and confirmking to IS 15622 of approved make in all colours and shade,laid on 20MM thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc including carriage of materials ( Complete)

Providing and fixing ist quality ceremic glazed floor tiles confirming to IS ; 15622 ( thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy,bottle green black of any size as approved by Engineer, in charge in skirting risers of steps and dadors over 12MM thick bed of cement mortar 1:3 ( 1 cement 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg/sqm including painting in white cement mixed with pigment of matching shade including carriage of materials complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manfufacturer) of approved make in all colour shades except burgandy,bottle green black of any size as approved by Engineer,incharge in skirting riser of steps and dador over 12MM thickv bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade including carriage of materials ( Complete).

Earth work excavation by manual means in trenches for foundations,drains pipes cables etc ( not exceeding 1.5M in width) and for shafts walls,cesspits and the like not exceeding 10sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5M, including getting out excavated earth and disposal of surplus excavated earth as directed all kinds of soil 1M from cutting edge.

Earth work in surface excavation not exceeding 30CM in depth but exceeding 1.5M in width as wells as 10sqm on plan including disposal of excavated earth lead upto 50M and lift upto 1.5M as directed by Engineer incharge all kinds of soil.

Brick work with common burnt clay ( Non modular)bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand including carriage of materials ( complete)

Extra for brick work with common burnt clay bricks/cement conc. Bricks in superstrucrture above plinth level upto floor five level.

Structural steel work in built up sections trusses and framed work including cutting hoisting fixing In position and applying a priming coat of approved steel primer all complete welded .

Providing and fixing 1MM thick M.S Sheet door with frame of 40x40x6 MM angle Iron and 3MM M.S gusset plates at the junctions acnd corners all necessary fittings complete including applying a priming coat of approved steel primer using M.S angle 40x40x6 MM for diagonal braces.

Making plinth protection 50MM thick of cement concrete 1:3 : 6 ( 1 cement 3 coarse sand 6 graded stone 20mm nominal size) over 75MM bed of dry brick ballost 40MM nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing including carriage of material complete.

Finishing walls with water proofing cement paint of required shade on new work ( two or more coats applied @ 3.84 kg/10sqm.

Cement conc. Flooring 1:2:4 ( 1 cement : 2 coarse sand 4 grade stone agg)finished with a floating coat of neat cement including cement slurry and curing comp but exceeding the cost of nosing of steps etc 40MM thick with 20MM nominal size stone agg. including carriage of materials complete.

Demolishing brick work manually /by mechanical means including stacking of serviceable material acnd dipsoal of unserviceable matgerial within 50M lead as per direction of Engineder in charge in cement mortar.

Chequered precast cement concrete tiles 22MM thick in foot path and courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing cleaning and curing complete on 20Mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand ) shade using white cement including carriage of materials. Complete.

Dismentalling tile work in floors and roofs laid in cement mortar including stacking material within 50M lead for thickness of tiles 10Mm to 25MM

Providing and fixing G.I pipes complete with G.I fittings and claimps including cutting and making good the walls 15 MM dia nominal bore medium.

Providing and fixing 15MM nominal bore C.P. brass bib cock of approved quality confirming to IS 8931

Providing and fixing 15 MM nominal bore C.P. brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810gms.

Providing and fixing 15MM nominal bore C.P. brass angle valve for basin mixer and geysor points of approved make confirming IS 8931.

Providing and fixing white vitreous china pedestal type water closet ( Europian type) with seat and lid 10 leter low level white vitreious chine flushing cistern and C.P. flush bend with fittings and C.I, brackets 40MM flush bend over flow arrangement with specials of standard make and mosquito proof coupling of approved muncipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required W.C pan with ISI marked white solid plastic seat and lid.

Providing and fixing 2MM dia C.P. /SS jet with flexible tube upto 1M long with S.S triangular plate to European type W.C of quality and make as approved by Engineer in charge.

Providing and fixing white vitreious chine padestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing wash basin with C.I. brackets ,15 MM dia C.P. brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls wherever required white viterious china wash basin size 550 x400 MMwith a 15 MM CP brass single hole basin mixer.

Providing and fixing 600X450MM beveled edge mirror of superior glass ( of approved quality ) complete with 6MM thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Making soak pit 2.5 M diameter 3.0 meter deep with 45x45CM dry brick honey comb shaft with common burnt clay ( non modular) bricks of class designation 7.5 bricks and S.W drain pipe 100 MM diamter 1.8 M long complete as per standard design including carriage of materials complete

Construting brick masonary man hole in cement mortar 1:4 ( 1 cement : 4 coase sand with RCC top slab with 1:1.5: 3 9 1 cement : 1.5 coarse sand 3 graded stone aggregate 20mm nominal sioze) foundation concrete 1:4:8 ( 1 cement ; 4 coarse sand : 8 graded stone 40mm nominal size inside plastering 12MM thick with cement mortar 1:3 ( 1 cement : 3 coarse sand ) finished with floating coat of near cement acnd making channels in cement conc. 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) finished with a floating coat of neat cement complete as per standard design inside size 90 CMx80CM and 45CM deep including C.I. cover with frame ( light duty) 455x610MM integral demension total weight of cover not less than 38Kg with common burnt clay FPS ( Non modular) bricks of class designation 7.5 including carriage of materials complete.

Labour engaged for shifting of material from offices,removal of rubbish preparing the surfafe removal of pipes cleaning of drains in difference buildings of irrigation ( complex and Guest House).

Providing and fixing on wall face un plasticized rigid PVC rain water pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10MM gap for thermal expansion single socketed pipes 110MM diameter.

Providing and fixing PVC trap self cleaning 100MM inlet and 100M outlet size including all accessories complete.

Providing and fixing on wall face un plasticized PVC moulded fittings accessories for un plasticized rigid PVC rain water pipes conforming to IS 3592 type A incoluding jointing with seal ring conforming to IS 5382 leaving 10MM gap for therml expansion.(1) 110 MM bend

Providing and fixing on wall face un plasticized PVC moulded fittings accessories for un plasticized rigid PVC rain water pipes conforming to IS 3592 type A incoluding jointing with seal ring conforming to IS 5382 leaving 10MM gap for therml expansion. (1) singhle tee without door 110x110x110M

Providing and fixing CP soap dish of standard size and quality.

Providing and fixing CP soap towel rail of standard size and quality

Providing and fixing CP gratings of approved design and quality.

Provding/Fixing C.P. cup of approved design and quality

Providing/Fixing C.P nipple of approved design and quality

Providing and white fixing vitreious china flat back or wall corner type lipped front urinal basin of 430x260x350 MM and 340x410x265 MM sizes respectively with automatic flushing cisten with standard flush pipe and CP brass spreaders with brass union and GI clamps complete including painting of fitting and brackets cutting and making good the walls and floors whereever required one urinal basin with 5 liter white PVC automatic flushing cistern.

providnig and laying cement conc 1:3:6 ( 1 cement : 3 coarse sand : 6 gradced sone agg. 20Mm nominal ) including bed concrete as pedr standard design 100MM diameter SW pipe including of materials complete.

Providng and laying in situ five course water proofing treatment with APP ( Atatic poly propylene ) modified polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm 2nd ,4th courses of bonding material @ 1.20 kg/sqm which shall consist of brown type bitumen of grade 85/25 confirming to IS 702,3rd laer of roofing membreane APP modified ploymeric membrane 200MM thick of 3.00 Kg per sqm wieight consisting of five layers pre fabcricated with centre core as 100 micron HMDPE fitter sand switched on both sides with ploymeric mix and the polymeric mix is protected on both sides with 20 Mrcon HMHDPE,5th top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 ( 1 cement : 3 coarse sand ) mixed with 2% integral water proofing compound by weight of cement over a 12MM layer of cement mortar 1:3 *( `1 cement : 3 coarse sand and finished neat

Priding and fixing of aluminum work for doors,windows,ventilator and partitions with extruded built up standard tublar section/appropriate Z-sections and others sections of approved make confirming to IS 733 and IS 1285 fixed with dash fastener of required dia and size including necessary filling up of gaps at junction i.e. at top, bottom and sides with required EPDM rubber /neoprene gasket felt etc. Aluminum shall be smooth rest free mitred and jointed mechanically wherever required including cleat angle, alunium snap, weading for galzing /panalling /Cp/stainless steel screws,all complete as per artitechtoral drawings and the directions of the Engineer in charge o9 brancket glazing, panalling and dash fasters to be paid separately

(I) shutters of doors,windows and ventilator includingproviding and fixing hinges/pivots and making provisions for fixing of fittings whereever required incluiding the cost of EPDM rubber /neoprene gasket required ( fitting shall be paid for separately.Powder coated alumimum ( minimum thickness of powder coated 50 microns

Providing and fixing alunimum round shape handle of outer dia 100 MM with SS screws etc as per the directions of Engineer incharge powdered coatd minimu thickness 50 Microns alumimum

Providing and fixing 12MM thick prelaminated particle board flat pressed three layer or graded wood particle ( Confirming to IS : 12823 Grade 1 and type II ) in panelling fixed in alumimum doors windows shutters and partition frames with CP brass /stairless steel screws etc complete as per architectural drawings and directions of Enginers in charge prelaminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminum doors, windows ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the artichtectural drawings and the directions of Engineer in charge ( Cost of aluminum snap beading shall be paid in basic items with float glass panes of 50 MM thickness weight not less than 12.05 Kg per sqm

Providing and fixing aluminum tower bolts ISI marked andozed ( anodic coating not less than grade AC-10 as per IS : 1868 transparent or dyed to required colour or shade with necessary screws etc complete. ( 100 x10 MM.

Providing and fixing aluminum pull bolt lock andozed ISI marked ( Anodic coating ) not less than grade AC 10 as per IS 1868 transparent or dyed to required colour and shad e with necessary screws bolts,nuts and washers etc. complete.

Welder engaged for repair of gates along with welding set and material needed for welding complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete.

Providing wood work in frames of doors windows clerestory windows and other frames ,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dast fastners shall be paid for separately. Second class deodar wood.

Renewing glass panes with wooden fillets wherever necessary float glass panes of thickness 4.0 MM ( Weight not less than 10 kg/sqm

Electricity fitting in various offices of head quarters building MID building,MICD building and guest house building by way of supplyng and fixng of various electric items of appropriate thickness and size like wiring switches sockets LED builbs ,LED tubes mineature circuit breakers, PVC conduits condensers holders gate lights laminated sheets and any other item as deemded necessary at site including dismentalling as required .All items ISI marked of make havells ,Anchor Wipro L&T bonton etc ( Complete Job)

Supply,installation,testing,commissioning of 120 MM sweep ceiling fans complete with blades and other necessary items ( ISI marked and make Havells,Anchor,Bajaj ,Crompton,orient or like ( White).

Supply installation testing commissioning of heavy duty 300MM sweep exhaust fan complete along with necessary accessories ISI marked ( Make Havells,Usha,Orient ,Anchor)

RAJESH KUMAR

Balwant Singh

ROHIT SHARMA

Raj Kumar

M/S DAVINDER SHARMA CONTRACTOR

Sushil Kumar

M/S SADEEP KUMAR BUILDING MATERIAL AND CONTRACTOR

Tilak Raj