Himachal

AOC

Works

Civil Works

A/R and M/O various Type - I , Type - VI GAD at Kasumpti, Shimla

Public Works Department

kasupti | Shimla, Himachal Pradesh

Amount: Refer DocsCloses: 7 May 2026Closed

Timeline

Published29 Apr 2026
Closed7 May 2026
Technical Evaluation1 Jun 2026
Financial Evaluation3 Jun 2026
Awarded1 Jul 2026

Bids

Percentage

3 Bids1 Jul 2026

#	Company	Amount	Rank	Status
1	Sabir Ahamad L1₹4.4 LAccepted-AOC NOT AVAILABLE \| NEW DELHI \| DELHI \| 110001	₹4.4 L	L1	Accepted-AOC AOC
2	MUBARAK HUSSAIN L2₹4.5 L+₹4,424 (1.00%)Rejected-Finance R O THAKUR NIWAS SANAN P O SANJAULI SHIMLA 6 \| SHIMLA \| HIMACHAL PRADESH \| 171001	₹4.5 L+₹4,424 (1.00%)	L2	Rejected-Finance 2nd Lowest
3	NITISH KOHLI Rejected-Technical	-	-	Rejected-Technical no

Tender Value

Refer Docs

EMD Value

₹8,900

Closing Date

7 May 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer kasumpti Division HPPWD Shimla3

Address

Executive Engineer kasumpti Division HPPWD Shimla3

Work Description

Covering of periphary of Type - IV set no. 15 to 26 under Kasumpti Section

Tender Information

Tender ID

2026_PWD_135285_2

Reference Number

SD-I-CTR-Tender- 2003 dt 27-04-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

kasupti

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS per SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredContractor registration IN APPROPRIATE CLASS (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18 (.pdf)

RequiredForm No. 7/8 duly signed (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹8,900

Important Dates

Last Activity

17 Jul 2026

Published

29 Apr 2026

Bid Opening

7 May 2026

Download Starts

29 Apr 2026

Download Ends

7 May 2026

Submission Starts

29 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work.	2,361.98	Kgs	105	₹2,48,007.9
2	Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint.	76.5	Sqm	70	₹5,355
3	Providing and Fixing M.S iron Hinges (i) M.S heavy weight butt hinges 125x90x4.0 mm IS : 1341 marked .	18	Nos	180	₹3,240
4	Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 250x16mm	3	Nos	250	₹750
5	Providing and fixing Copper oxidised fittings (iron) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Tower bolts (barrel type) 150x10mm.	4	Nos	100	₹400
6	Providing and fixing polycarbonate sheet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 2.00 mm thick.	75	Sqm	2,150	₹1,61,250
7	Providing and fixing M.S handles with necessary screws etc. Complete (i) 125mm , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge	12	Nos	120	₹1,440
8	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)	2.73	Cum	1,250	₹3,412.5
9	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:5:10 (One cement : five coarse sand) : ten graded stone aggregate 40 mm(forty milimetre) nominal size)	0.61	Cum	4,400	₹2,684
9.1	(ii) 1:3:6 (One cement : three coarse sand) : six graded stone aggregate 40 mm(forty milimetre) nominal size)	2.73	Cum	5,800	₹15,834

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.05 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.48 MB

Work Item Documents

SBD442374.pdf

Tender Documents • 7.00 MB

BOQ_200363.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Sabir Ahamad

L1₹4.4 LAccepted-AOC

NOT AVAILABLE | NEW DELHI | DELHI | 110001

MUBARAK HUSSAIN

L2₹4.5 L+₹4,424 (1.00%)Rejected-Finance

R O THAKUR NIWAS SANAN P O SANJAULI SHIMLA 6 | SHIMLA | HIMACHAL PRADESH | 171001

NITISH KOHLI

Rejected-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work.

2,361.98

Kgs

105

₹2,48,007.9

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint.

76.5

Sqm

₹5,355

Providing and Fixing M.S iron Hinges (i) M.S heavy weight butt hinges 125x90x4.0 mm IS : 1341 marked .

Nos

180

₹3,240

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 250x16mm

Nos

250

₹750

Providing and fixing Copper oxidised fittings (iron) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Tower bolts (barrel type) 150x10mm.

Nos

100

₹400

Providing and fixing polycarbonate sheet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 2.00 mm thick.

Sqm

2,150

₹1,61,250

Providing and fixing M.S handles with necessary screws etc. Complete (i) 125mm , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge

Nos

120

₹1,440

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

2.73

Cum

1,250

₹3,412.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:5:10 (One cement : five coarse sand) : ten graded stone aggregate 40 mm(forty milimetre) nominal size)

0.61

Cum

4,400

₹2,684

9.1

(ii) 1:3:6 (One cement : three coarse sand) : six graded stone aggregate 40 mm(forty milimetre) nominal size)

2.73

Cum

5,800

₹15,834